forward-ports
时间: 2023-10-17 16:06:30 浏览: 49
Forward-ports 指的是将一个网络端口的流量转发到另一个网络端口的过程。这通常用于在不同的网络设备之间建立连接,例如将互联网上的流量转发到本地网络中的服务器。另外,也可以通过 forward-ports 实现端口映射,使得外部网络访问本地网络中的设备。
在路由器和防火墙等网络设备上,可以通过配置端口映射规则来实现 forward-ports。例如,将外部网络中的端口 80 转发到本地网络中的服务器的端口 8080 上。
需要注意的是,forward-ports 可能会导致网络安全问题,因为它可以使得外部网络访问本地网络中的设备。因此,在设置 forward-ports 时需要谨慎考虑安全问题,并采取相应的安全措施。
相关问题
public (active) target: default icmp-block-inversion: no interfaces: eth0 sources: services: dhcpv6-client ssh ports: 1080/udp protocols: masquerade: no forward-ports: source-ports: icmp-blocks: rich rules:
这个输出表明,您已经成功地将 UDP 端口 1080 添加到了公共区域的防火墙规则中。具体来说,输出中的各个部分含义如下:
- `public (active)`:表示当前活动的区域是公共区域。
- `target: default`:表示默认的防火墙策略是允许所有流量通过。
- `icmp-block-inversion: no`:表示未禁止 ICMP 阻塞反转(即允许 ICMP 流量通过)。
- `interfaces: eth0`:表示仅允许通过网络接口 eth0 的流量通过。
- `sources:`:表示未限制传入流量的来源。
- `services: dhcpv6-client ssh`:表示允许 DHCPv6-客户端和 SSH 服务的流量通过。
- `ports: 1080/udp`:表示允许 UDP 协议的 1080 端口的流量通过。
- `protocols:`:表示未限制通过防火墙的协议。
- `masquerade: no`:表示未启用伪装(即源地址转换)。
- `forward-ports:`:表示未设置端口转发规则。
- `source-ports:`:表示未限制传出流量的源端口。
- `icmp-blocks:`:表示未禁止任何 ICMP 类型的流量。
- `rich rules:`:表示未定义任何复杂的防火墙规则。
请注意,这只是当前防火墙规则的一个摘要,实际上可能包含更多的规则和细节。如果您需要更详细的信息,请尝试运行 `firewall-cmd --list-all` 命令。
weave launch --nickame docker-weave WARNING: existing iptables rule '-A FORWARD -j REJECT --reject-with icmp-host-prohibited' will block name resolution via weaveDNS - please reconfigure your firewall. The weave container has died. Consult the container logs for further details.
It looks like you are trying to launch a Weave network but encountering an issue with your firewall settings. The warning message you provided suggests that an existing iptables rule is blocking name resolution via WeaveDNS, which could cause issues with your network.
To fix this issue, you should modify your firewall settings to allow name resolution via WeaveDNS. This can be done by removing the existing iptables rule or by adding a new rule to allow traffic on the appropriate ports.
You can also try launching the Weave network without WeaveDNS by adding the `--no-dns` flag to the `weave launch` command. This will disable WeaveDNS and allow you to launch the network without encountering the name resolution issue.
If the Weave container continues to die, you should consult the container logs for further details on the cause of the failure. You can view the logs by running the following command:
```
docker logs <container_name_or_id>
```
Once you have identified the issue, you can work on resolving it and relaunching the Weave network.