qpainterpath如何在圆中去除2个半圆
时间: 2024-02-23 12:59:01 浏览: 13
如果要在圆中去除两个半圆,可以使用`QPainterPath`的`addPath`函数来实现。
具体步骤如下:
1. 创建一个包含圆的`QPainterPath`对象:
```cpp
QPainterPath path;
path.addEllipse(centerX - radius, centerY - radius, 2 * radius, 2 * radius);
```
其中,`centerX`和`centerY`是圆心的坐标,`radius`是圆的半径。
2. 创建两个半圆的路径:
```cpp
QPainterPath arcPath1;
arcPath1.arcTo(centerX - radius, centerY - radius, 2 * radius, 2 * radius, startAngle1, spanAngle1);
QPainterPath arcPath2;
arcPath2.arcTo(centerX - radius, centerY - radius, 2 * radius, 2 * radius, startAngle2, spanAngle2);
```
其中,`startAngle1`和`spanAngle1`是第一个半圆的起始角度和跨度角度,`startAngle2`和`spanAngle2`是第二个半圆的起始角度和跨度角度。
3. 使用`addPath`函数将两个半圆路径添加到圆路径中:
```cpp
path.addPath(arcPath1);
path.addPath(arcPath2);
```
4. 使用`subtracted`函数将两个半圆从圆中去除:
```cpp
path = path.subtracted(arcPath1);
path = path.subtracted(arcPath2);
```
5. 绘制圆形路径:
```cpp
QPainter painter(this);
painter.drawPath(path);
```
完整的代码示例:
```cpp
void MyWidget::paintEvent(QPaintEvent *)
{
int centerX = width() / 2;
int centerY = height() / 2;
int radius = 50;
// 创建圆形路径
QPainterPath path;
path.addEllipse(centerX - radius, centerY - radius, 2 * radius, 2 * radius);
// 创建两个半圆路径
QPainterPath arcPath1;
arcPath1.arcTo(centerX - radius, centerY - radius, 2 * radius, 2 * radius, 45, 90);
QPainterPath arcPath2;
arcPath2.arcTo(centerX - radius, centerY - radius, 2 * radius, 2 * radius, 135, 90);
// 将两个半圆路径添加到圆路径中
path.addPath(arcPath1);
path.addPath(arcPath2);
// 从圆中去除两个半圆
path = path.subtracted(arcPath1);
path = path.subtracted(arcPath2);
// 绘制圆形路径
QPainter painter(this);
painter.drawPath(path);
}
```
以上代码会在窗口中心绘制一个半径为50的圆形,并在其中去除了起始角度为45度和135度、跨度为90度的两个半圆。