clear all; clc; du = pi/180; a = [0+0.001, 185+0.0079, 0+0.005, 120+0.12]; alpha = [pi/2+0.003, 0+0.001, pi/2+0.005, pi/2]; d = [0+0.001, 0+0.0079, 90+0.005, 0+0.12]; theta = [90du+0.02, 0, 0.023, 0.08]; beta = zeros(1, 4)+0; L1(1) = Link('d', d(1), 'a', a(1), 'alpha', alpha(1), 'qlim', [180du, 365du], 'modified'); L1(2) = Link('d', d(2), 'a', a(2), 'alpha', alpha(2), 'qlim', [3du, 63du], 'modified'); L1(3) = Link('d', d(3), 'a', a(3), 'alpha', alpha(3), 'qlim', [60du, 120du], 'modified'); L1(4) = Link('d', d(4), 'a', a(4), 'alpha', alpha(4), 'qlim', [230du, 326du], 'modified'); Needle = SerialLink(L1, 'name', 'Needle'); T1 = DH(1, a(1), alpha(1), d(1), theta(1)+beta(1)); T2 = DH(2, a(2), alpha(2), d(2), theta(2)+beta(2)); T3 = DH(3, a(3), alpha(3), d(3), theta(3)+beta(3)); T4 = DH(4, a(4), alpha(4), d(4), theta(4)+beta(4)); T = T1T2T3T4; delta_a = 0.001; delta_T = zeros(4, 4); delta_a = 0.001; delta_T = zeros(4, 4); for i = 1:4 delta_T = delta_T + diff(T, 2, a(i))*delta_a; end delta_alpha = 0.003; for i = 1:4 delta_T = delta_T + diff(T, 2, alpha(i))*delta_alpha; end delta_d = 0.005; for i = 1:4 delta_T = delta_T + diff(T, 2, d(i))delta_d; end delta_theta = 0.02du; for i = 1:4 delta_T = delta_T + diff(T, 1, theta(i))*delta_theta; end delta_beta = 0.0; for i = 1:4 delta_T = delta_T + diff(T, 1, beta(i))*delta_beta; end q = [theta(1), 0, theta(3), theta(4)]; T = Needle.fkine(q); pos = T(1:3, 4); euler = tr2eul(T, 'ZYX')/du; delta_pos = delta_T(1:3, 4); delta_euler = tr2eul(delta_T, 'ZYX')/du;错误使用 diff 维度参数必须是处于索引范围内的正整数标量。 出错 ceshi2 (line 30) delta_T = delta_T + diff(T, 2, a(i))*delta_a;帮我重新该做发出能运行的代码

请尝试使用以下代码，对之前的错误进行了修正：

clear all; clc;
du = pi/180;
a = [0+0.001, 185+0.0079, 0+0.005, 120+0.12];
alpha = [pi/2+0.003, 0+0.001, pi/2+0.005, pi/2];
d = [0+0.001, 0+0.0079, 90+0.005, 0+0.12];
theta = [90*du+0.02, 0, 0.023, 0.08];
beta = zeros(1, 4)+0;

L1(1) = Link('d', d(1), 'a', a(1), 'alpha', alpha(1), 'qlim', [180*du, 365*du], 'modified');
L1(2) = Link('d', d(2), 'a', a(2), 'alpha', alpha(2), 'qlim', [3*du, 63*du], 'modified');
L1(3) = Link('d', d(3), 'a', a(3), 'alpha', alpha(3), 'qlim', [60*du, 120*du], 'modified');
L1(4) = Link('d', d(4), 'a', a(4), 'alpha', alpha(4), 'qlim', [230*du, 326*du], 'modified');
Needle = SerialLink(L1, 'name', 'Needle');

T1 = DH(1, a(1), alpha(1), d(1), theta(1)+beta(1));
T2 = DH(2, a(2), alpha(2), d(2), theta(2)+beta(2));
T3 = DH(3, a(3), alpha(3), d(3), theta(3)+beta(3));
T4 = DH(4, a(4), alpha(4), d(4), theta(4)+beta(4));
T = T1*T2*T3*T4;

delta_a = 0.001;
delta_T = zeros(4, 4);
for i = 1:4
    delta_T = delta_T + diff(T, a(i))*delta_a;
end

delta_alpha = 0.003;
for i = 1:4
    delta_T = delta_T + diff(T, alpha(i))*delta_alpha;
end

delta_d = 0.005;
for i = 1:4
    delta_T = delta_T + diff(T, d(i))*delta_d;
end

delta_theta = 0.02*du;
for i = 1:4
    delta_T = delta_T + diff(T, theta(i))*delta_theta;
end

delta_beta = 0.0;
for i = 1:4
    delta_T = delta_T + diff(T, beta(i))*delta_beta;
end

q = [theta(1), 0, theta(3), theta(4)];
T = Needle.fkine(q);
pos = T(1:3, 4);
euler = tr2eul(T, 'ZYX')/du;
delta_pos = delta_T(1:3, 4);
delta_euler = tr2eul(delta_T, 'ZYX')/du;

请注意，我对 diff 函数的使用进行了修改，将第二个参数的维度参数修改为了一个标量，而不是一个变量。同时，在定义 theta 变量时，需要将 du 乘以 90，才能得到正确的弧度值。