如何进行forward DNS lookup (domain name to IP address) and rDNS (IP to domain) 进行HELO的查找
时间: 2024-02-20 20:59:14 浏览: 23
要进行forward DNS lookup,可以使用命令行工具如nslookup或dig。例如,要查找域名example.com的IP地址,可以在命令行中输入:
```
nslookup example.com
```
或者
```
dig example.com
```
要进行rDNS,也可以使用nslookup或dig。例如,要查找IP地址为192.168.1.1的主机名,可以在命令行中输入:
```
nslookup 192.168.1.1
```
或者
```
dig -x 192.168.1.1
```
在进行HELO查找时,您需要使用telnet客户端连接到目标主机并发送HELO命令。例如,要查找smtp.example.com的HELO响应,可以在命令行中输入:
```
telnet smtp.example.com 25
```
然后发送HELO命令:
```
HELO example.com
```
服务器应该会回复一个包含其名称的响应。
相关问题
请翻译:202.192.1.5 is making SMTP connections which indicate that it is misconfigured. Some elements of your existing configuration create message characteristics identical to previously identified spam messages. Please align the mail erver's HELO/EHLO 'icoremail.net' with proper DNS (forward and reverse) values for a mail server. Here is an example: Correct HELO/DNS/rDNS alignment for domain example.com: - Mail server HELO: mail.example.com - Mail server IP: 192.0.2.12 - Forward DNS: mail.example.com -> 192.0.2.12 - Reverse DNS: 192.0.2.12 -> mail.example.com Correcting an invalid HELO or a HELO/forward DNS lookup mismatch will stop the IP from being listed again. Points to consider: * Alignment: it is strongly recommended that the forward DNS lookup (domain name to IP address) and rDNS (IP to domain) of your IP should match the HELO value set in your server, if possible * The IP and the HELO value should both have forward and rDNS, and should resolve in public DNS * Ensure that the domain used in HELO actually exists! Additional points: * According to RFC, the HELO must be a fully qualified domain name (FQDN): "hostname.example.com" is an FQDN and "example.com" is not an FQDN. * The domain used should belong to your organisation. * HELO is commonly a server setting, not DNS. Contact your hosting provider for assistance if needed. You can test a server's HELO configuration by sending an email from it to helocheck@abuseat.org. A bounce that contains the required information will be returned immediately. It will look like an error, it is not. Please examine the contents of this email. If all settings are correct, you have a different problem, probably malware/spambot. Again, the HELO we are seeing is 'icoremail.net'. The last detection was at 2023-05-27 13:35:00 (UTC). For information on misconfigured or hacked SMTP servers and networks, please see this FAQ: https://www.spamhaus.org/faq/section/Hacked...%20Here's%20help#539 CSS listings expire a few days after last detection. You can always open a ticket (or update an existing one) to inform us when and how the situation was been secured.
202.192.1.5正在建立SMTP连接,表明其配置不正确。您现有的一些配置元素创建与先前识别的垃圾邮件相同的消息特征。请将邮件服务器的HELO/EHLO“icoremail.net”与邮件服务器的适当DNS(正向和反向)值对齐。以下是一个示例:域示例.com的正确HELO/DNS/rDNS对齐方式:-邮件服务器HELO:mail.example.com-邮件服务器IP:192.0.2.12-正向DNS:mail.example.com->192.0.2.12-反向DNS:192.0.2.12->mail.example.com。更正无效的HELO或HELO/正向DNS查找不匹配将停止该IP再次被列出。需要考虑的要点:*对齐:强烈建议您的IP的正向DNS查找(域名到IP地址)和rDNS(IP到域)应与服务器中设置的HELO值匹配,如果可能的话。* IP和HELO值都应具有正向和反向DNS,并且应在公共DNS中解析。*确保在HELO中使用的域实际存在!附加要点:*根据RFC,HELO必须是完全限定域名(FQDN):“hostname.example.com”是FQDN,“example.com”不是FQDN。*使用的域应属于您的组织。*HELO通常是服务器设置,而不是DNS。如有需要,请联系您的托管提供商寻求帮助。您可以通过向helocheck@abuseat.org发送电子邮件来测试服务器的HELO配置。将立即返回包含所需信息的反弹。它看起来像一个错误,但它不是。请检查此电子邮件的内容。如果所有设置都正确,则您可能有不同的问题,可能是恶意软件/垃圾邮件机器人。再次看到的HELO是“icoremail.net”。最后一次检测是在2023年5月27日13:35:00(UTC)。有关配置不正确或被黑客攻击的SMTP服务器和网络的信息,请参见此FAQ:https://www.spamhaus.org/faq/section/Hacked...%20Here's%20help#539。CSS列表在最后检测几天后过期。您始终可以打开一个工单(或更新现有工单),以告知我们何时以及如何安全地解决了该情况。
dns lookup
DNS查找是一种通过域名系统(DNS)将域名转换为IP地址的过程。可以使用各种工具和方法进行DNS查找,包括命令行工具和编程语言中的库。在提到DNS查找时,可以使用dnslookup命令行实用程序或QDnsLookup类来进行查找。
要使用dnslookup命令行实用程序进行DNS查找,可以按照以下步骤进行安装:
1. 使用自制程序进行安装:运行命令`brew install ameshkov/tap/dnslookup`。该命令将安装dnslookup工具。
2. 安装完成后,可以在命令行中直接使用`dnslookup`命令进行DNS查找。
QDnsLookup是一种在编程语言中进行DNS查找的方法。它使用操作系统提供的机制来执行查找。要进行DNS查找,可以按照以下步骤:
1. 创建一个QDnsLookup类的实例。
2. 指定要查找的域名和类型。
3. 调用lookup()函数来执行查找。
4. 在查找完成后,QDnsLookup类会发出finished()信号,您可以通过连接到这个信号来获取查找结果。
例如,您可以使用nslookup命令行工具来进行DNS查找。要查询一个域名,只需在命令行中输入`nslookup`,然后输入要查询的域名,例如`www.sina.com`。nslookup将返回与该域名相关的IP地址和其他相关信息。
总结:
DNS查找是将域名转换为IP地址的过程。可以使用dnslookup命令行实用程序或QDnsLookup类来进行DNS查找。使用dnslookup命令行实用程序,可以通过安装`brew install ameshkov/tap/dnslookup`来进行安装,并在命令行中直接使用dnslookup命令。使用QDnsLookup类,可以在编程语言中进行DNS查找,并通过连接到finished()信号来获取查找结果。另外,nslookup命令行工具也可以用来进行DNS查找,只需在命令行中输入`nslookup`,然后输入要查询的域名即可。