请帮我使用ensp写一段代码，要求有7台交换机，36台PC，2台路由器，要有实际配置

好的，以下是一段简单的代码，可以生成7台交换机、36台PC和2台路由器的实际配置，并且将它们连接成一个简单的网络：

// 创建7台交换机
for (int i = 1; i <= 7; i++) {
    printf("configure terminal\n");
    printf("hostname switch%d\n", i);
    printf("vlan 10\n");
    printf("vlan 20\n");
    printf("interface GigabitEthernet 0/0\n");
    printf("switchport mode trunk\n");
    printf("exit\n");
    printf("\n");
}

// 创建2台路由器
for (int i = 1; i <= 2; i++) {
    printf("configure terminal\n");
    printf("hostname router%d\n", i);
    printf("interface GigabitEthernet 0/0\n");
    printf("ip address 192.168.1.%d 255.255.255.0\n", i);
    printf("no shutdown\n");
    printf("exit\n");
    printf("interface GigabitEthernet 0/1\n");
    printf("ip address 192.168.2.%d 255.255.255.0\n", i);
    printf("no shutdown\n");
    printf("exit\n");
    printf("\n");
}

// 创建36台PC
for (int i = 1; i <= 36; i++) {
    printf("configure terminal\n");
    printf("hostname pc%d\n", i);
    printf("interface GigabitEthernet 0/0\n");
    printf("ip address 192.168.1.%d 255.255.255.0\n", i);
    printf("no shutdown\n");
    printf("exit\n");
    printf("\n");
}

// 连接交换机和路由器
printf("configure terminal\n");
printf("interface GigabitEthernet 0/0\n");
printf("switchport mode access\n");
printf("switchport access vlan 10\n");
printf("exit\n");
printf("interface GigabitEthernet 0/1\n");
printf("ip address 192.168.1.1 255.255.255.0\n");
printf("no shutdown\n");
printf("exit\n");
printf("interface GigabitEthernet 0/0\n");
printf("ip address 192.168.2.1 255.255.255.0\n");
printf("no shutdown\n");
printf("exit\n");
printf("\n");

printf("configure terminal\n");
printf("interface GigabitEthernet 0/0\n");
printf("switchport mode access\n");
printf("switchport access vlan 20\n");
printf("exit\n");
printf("interface GigabitEthernet 0/1\n");
printf("ip address 192.168.1.2 255.255.255.0\n");
printf("no shutdown\n");
printf("exit\n");
printf("interface GigabitEthernet 0/0\n");
printf("ip address 192.168.2.2 255.255.255.0\n");
printf("no shutdown\n");
printf("exit\n");
printf("\n");

// 连接交换机和PC
for (int i = 1; i <= 7; i++) {
    for (int j = (i-1)*4+1; j <= i*4; j++) {
        printf("configure terminal\n");
        printf("interface GigabitEthernet 0/1\n");
        printf("switchport mode access\n");
        printf("switchport access vlan %d\n", (i % 2 == 0 ? 20 : 10));
        printf("exit\n");
        printf("\n");
    }
}

// 设置默认网关
printf("configure terminal\n");
printf("ip default-gateway 192.168.1.1\n");
printf("exit\n");

这段代码生成了一个简单的网络，其中有7台交换机、36台PC和2台路由器。交换机和PC通过 VLAN 进行划分，路由器连接了两个 VLAN，并且设置了默认网关。请注意，这段代码仅仅是示例代码，实际的配置取决于具体的网络拓扑和需求，需要根据实际情况进行修改。