COH是共阳极数码管显示“0”的字符编码吗
时间: 2023-09-04 09:11:42 浏览: 70
是的,COH 是共阳极数码管的一种编码方式,其中 COH 编码中的数字 0 对应的编码是 0xFC。共阳极数码管是一种常见的数码管类型,它的工作原理是通过在数码管的阳极上加电压来控制数码管的亮度,因此被称为共阳极数码管。在 COH 编码中,每个数字都对应着一个特定的 8 位二进制编码,用于控制数码管的每个段的亮度。
相关问题
假设相干积累是=数是16
如果您的意思是将相干积累的次数设置为16,那么可以在上述代码中添加一个循环来实现。假设您的信号是 `s`,参考信号为 `ref`,I/Q 分解后的信号为 `I` 和 `Q`,则可以按照以下步骤进行相干积累:
```matlab
% 生成模拟信号
fs = 1e6; % 采样率
t = 0:1/fs:1-1/fs; % 时间序列
f0 = 100e3; % 信号频率
s = sin(2*pi*f0*t); % 信号
% I/Q 分解
fc = 10e3; % 本振频率
I = s .* cos(2*pi*fc*t);
Q = -s .* sin(2*pi*fc*t);
% 选取参考信号
ref = cos(2*pi*fc*t);
% 参考信号 I/Q 分解
I_ref = ref .* cos(2*pi*fc*t);
Q_ref = -ref .* sin(2*pi*fc*t);
% 相位补偿
phase = atan2(Q_ref, I_ref);
I_comp = I .* cos(phase) + Q .* sin(phase);
Q_comp = -I .* sin(phase) + Q .* cos(phase);
% 相乘得到幅度和相位一致信号
s_comp = I_comp + 1i*Q_comp;
ref_comp = I_ref + 1i*Q_ref;
% 相干积累
N = 16; % 相干积累次数
s_coh_sum = 0;
for n = 1:N
% 相位补偿
phase = atan2(imag(ref_comp), real(ref_comp));
I_comp = I .* cos(phase) + Q .* sin(phase);
Q_comp = -I .* sin(phase) + Q .* cos(phase);
% 相乘得到幅度和相位一致信号
s_comp = I_comp + 1i*Q_comp;
ref_comp = ref_comp + s_comp;
% 累加
s_coh = s_comp .* conj(ref_comp);
s_coh_sum = s_coh_sum + s_coh;
end
% 绘制结果
figure
subplot(211)
plot(t, s)
hold on
plot(t, ref)
xlabel('Time (s)')
ylabel('Amplitude')
title('Original signals')
legend('Signal', 'Reference')
subplot(212)
plot(t, real(s_coh_sum))
xlabel('Time (s)')
ylabel('Amplitude')
title(['Coherent accumulation (', num2str(N), ' times)'])
```
这样,您就可以将相干积累的次数设置为16,得到相应的结果。
double(m_coh.data.x(npixels+1:end,:)')
这段代码可能是在将 m_coh.data.x 中的第 npixels+1 行及以下的行提取出来,然后将其转置为列向量,最后将每个元素乘以2。
具体来说,m_coh.data.x 是一个矩阵,它的行数可能大于 npixels。npixels+1:end 表示从第 npixels+1 行开始一直到矩阵的最后一行,':' 表示提取该范围内所有的列。因此,m_coh.data.x(npixels+1:end,:) 就是提取出了矩阵中的一部分。对这部分数据进行转置后,得到了一个列向量。
最后,对这个列向量中的每个元素乘以2,得到了最终的结果。