基于Linux的温湿度报警器相关代码
时间: 2023-11-29 20:06:16 浏览: 34
以下是基于Linux的温湿度报警器相关代码示例,使用C语言编写。
1. 安装必要的库
```bash
sudo apt-get update
sudo apt-get install libi2c-dev
sudo apt-get install wiringpi
```
2. 编写代码
```c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <wiringPi.h>
#include <wiringPiI2C.h>
#define DEVICE_ID 0x40
#define HUMIDITY_REG 0x00
#define TEMPERATURE_REG 0x02
int main()
{
int fd;
float humidity, temperature;
if(wiringPiSetup() == -1){
printf("Failed to setup wiringPi: %s\n", strerror(errno));
return 1;
}
fd = wiringPiI2CSetup(DEVICE_ID);
if(fd == -1){
printf("Failed to initialize I2C device: %s\n", strerror(errno));
return 1;
}
while(1){
int h, t;
h = wiringPiI2CReadReg16(fd, HUMIDITY_REG);
if(h == -1){
printf("Failed to read humidity: %s\n", strerror(errno));
continue;
}
t = wiringPiI2CReadReg16(fd, TEMPERATURE_REG);
if(t == -1){
printf("Failed to read temperature: %s\n", strerror(errno));
continue;
}
humidity = ((h >> 8) + ((h & 0xff) << 8)) / 10.0;
temperature = ((t >> 8) + ((t & 0xff) << 8)) / 10.0;
printf("Humidity: %.1f%% Temperature: %.1f°C\n", humidity, temperature);
if(humidity > 80.0 || temperature > 30.0){
printf("ALERT! High humidity or temperature detected.\n");
// 在此处执行报警操作
}
delay(5000);
}
return 0;
}
```
3. 编译代码
```bash
gcc -o temp-humidity main.c -lwiringPi
```
4. 运行程序
```bash
./temp-humidity
```
注意:在运行程序之前,请确保已将温湿度传感器正确连接到树莓派,并且根据需要调整警报阈值和警报操作。