实现数码管默认显示0000;按键1短按+1;长按+5;按键2短按-1;长按-5;
时间: 2024-05-06 10:15:56 浏览: 13
这是一个典型的嵌入式系统应用场景,需要使用外部按键和数码管,同时需要编写中断处理程序来检测按键事件。以下是一个简单的示例代码,可以实现上述功能:
```c
#include <reg51.h>
#define uchar unsigned char
#define uint unsigned int
sbit D1 = P0^0; // 数码管第一位
sbit D2 = P0^1; // 数码管第二位
sbit D3 = P0^2; // 数码管第三位
sbit D4 = P0^3; // 数码管第四位
sbit K1 = P1^0; // 按键1
sbit K2 = P1^1; // 按键2
uchar code LED_TBL[] = { // 数码管显示表
0x3F, 0x06, 0x5B, 0x4F,
0x66, 0x6D, 0x7D, 0x07,
0x7F, 0x6F, 0x77, 0x7C,
0x39, 0x5E, 0x79, 0x71
};
uint cnt1 = 0; // 按键1计数器
uint cnt2 = 0; // 按键2计数器
void display(uchar num) // 数码管显示函数
{
D1 = LED_TBL[num / 1000 % 10];
D2 = LED_TBL[num / 100 % 10];
D3 = LED_TBL[num / 10 % 10];
D4 = LED_TBL[num % 10];
}
void delay(uint t) // 延时函数
{
uint i, j;
for (i = 0; i < t; i++)
for (j = 0; j < 125; j++);
}
void key_scan() interrupt 0 // 外部中断0,按键检测
{
if (!K1) { // 按键1按下
delay(10); // 延时消除抖动
if (!K1) { // 确认按键1按下
cnt1++;
if (cnt1 >= 10) cnt1 = 0;
while (!K1); // 等待按键1松开
}
}
if (!K2) { // 按键2按下
delay(10); // 延时消除抖动
if (!K2) { // 确认按键2按下
cnt2++;
if (cnt2 >= 10) cnt2 = 0;
while (!K2); // 等待按键2松开
}
}
}
void main()
{
TMOD = 0x01; // 定时器0工作在模式1
TH0 = 0xFC; // 定时器0初值
TL0 = 0x67;
ET0 = 1; // 定时器0中断使能
EA = 1; // 总中断使能
IT0 = 1; // 外部中断0上升沿触发
EX0 = 1; // 外部中断0使能
while (1) {
display(cnt1 * 5 + cnt2); // 显示计数器的值
delay(100); // 延时100ms
}
}
void timer0() interrupt 1 // 定时器0中断,用于定时检测长按事件
{
static uchar key1_state = 0; // 按键1状态机
static uchar key2_state = 0; // 按键2状态机
TH0 = 0xFC; // 定时器0初值
TL0 = 0x67;
if (!K1) { // 按键1按下
key1_state++;
if (key1_state == 10) { // 长按
cnt1 += 5;
if (cnt1 > 10) cnt1 = 10;
key1_state = 0; // 状态机复位
}
} else {
key1_state = 0; // 状态机复位
}
if (!K2) { // 按键2按下
key2_state++;
if (key2_state == 10) { // 长按
cnt2 -= 5;
if (cnt2 > 10) cnt2 = 10;
key2_state = 0; // 状态机复位
}
} else {
key2_state = 0; // 状态机复位
}
}
```
这段代码使用了定时器和外部中断来实现按键检测和长按事件检测,并使用数码管显示计数器的值。需要注意的是,这段代码是针对特定硬件平台(使用了P0和P1口作为数码管和按键的控制口)编写的,如果需要在其他平台上运行,需要根据具体情况进行修改。
相关推荐
![docx](https://img-home.csdnimg.cn/images/20210720083331.png)
![doc](https://img-home.csdnimg.cn/images/20210720083327.png)
![mp4](https://img-home.csdnimg.cn/images/20210720083504.png)
![docx](https://img-home.csdnimg.cn/images/20210720083331.png)