DCNospfv3交换机配置
时间: 2023-07-04 17:05:58 浏览: 50
以下是DCNospfv3交换机配置的基本步骤:
1. 配置 OSPFv3 进程
```
ospfv3 process-id
router-id router-id
```
2. 配置接口,并将接口加入 OSPFv3 进程
```
interface interface-type interface-number
ospfv3 cost cost
ospfv3 network point-to-point|broadcast|non-broadcast|point-to-multipoint|point-to-multipoint-non-broadcast
ipv6 ospfv3 network-type point-to-point|broadcast|non-broadcast|point-to-multipoint|point-to-multipoint-non-broadcast
ipv6 ospfv3 hello-interval seconds
ipv6 ospfv3 dead-interval seconds
ipv6 ospfv3 priority priority
ipv6 ospfv3 authentication ipsec spi spi-key | md5 key
ipv6 ospfv3 neighbor neighbor-id priority priority
ipv6 ospfv3 bfd
```
3. 配置区域
```
ipv6 router ospfv3
area area-id
authentication ipsec spi spi-key | md5 key
range prefix prefix mask
virtual-link router-id area-id
stub [no-summary] [always] [receive-only]
no-summary
default-cost cost
default-originate [always] [metric metric-value] [route-map map-name]
nssa [no-summary] [default-information-originate [always] [metric metric-value] [route-map map-name]]
area-range address mask
```
4. 配置路由器 ID
```
ipv6 router ospfv3
router-id router-id
```
5. 配置区域范围
```
ipv6 router ospfv3
area area-id range prefix mask
```
以上是基本的 DCNospfv3交换机配置步骤。具体配置还需要根据实际情况进行调整。