没有合适的资源?快使用搜索试试~ 我知道了~
首页EIKI LC-WXL200 投影仪服务手册更新
EIKI LC-WXL200 投影仪服务手册更新
1.该资源内容由用户上传,如若侵权请联系客服进行举报
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
版权申诉
0 下载量 158 浏览量
更新于2024-06-27
收藏 30.97MB PDF 举报
"EIKI爱其LC-WXL200 服务手册.pdf" 这份文档是EIKI爱其品牌的服务手册,主要针对LC-WXL200系列多媒体投影机,包括了KK8-WXL200L00型号。手册的修订版本为REVISION-3,发布日期为2014年9月。它特别提醒用户注意匹配投影机背部的底盘号码(Chassis No.)与服务手册中的号码,以确保使用正确的服务信息。如果两者不匹配,可能需要额外的服务文献。 手册强调,本修订版只提供了差异化的服务信息,详细的服务指南应参照2010年8月发布的原版服务手册SM5111269-00,适用于LC-WXL200和WXL200L模型。此外,本手册还包括了一个重要的变更通知,涉及到R-偏振玻璃的服务部件替换。由于零部件采购原因,R-偏振玻璃已更换为替代部件,这些替代部件在性能上具有兼容性。 在2014年9月的更新中,服务手册指出R-偏振玻璃的更换细节可以在文档的后页找到。用户需要将此修订版文件与原版服务手册SM5111269结合使用,并参考修订编号SM5111269-03以获取完整信息。这确保了维修人员和用户能够掌握最新的投影机维护和修理知识,从而提供正确和有效的技术支持。 EIKI爱其LC-WXL200服务手册是为该系列投影机的维修和保养提供指导的重要参考资料,包含了关于设备硬件变更、服务部分更新以及故障排查的关键信息。对于那些需要处理或维修这些特定型号投影机的专业人员来说,这份手册是不可或缺的工具。
资源详情
资源推荐
![](https://csdnimg.cn/release/download_crawler_static/87447233/bg10.jpg)
-11-
Maintenance
Lamp Replacement
When the projection lamp of the projector reaches its end of life,
the Lamp replacement icon appears on the screen and LAMP
REPLACE indicator lights. Replace the lamp with a new one
promptly. The timing when the LAMP REPLACE indicator should
light is depending on the lamp mode.
Follow these steps to replace the lamp.
Allow a projector to cool for at least 45 minutes before you open
the Lamp cover. The inside of the projector can become very
hot.
CAUTION
Lamp replacement icon
Top Panel
LAMP REPLACE indicator
Note:
The Lamp replacement icon will not appear when the Display
function is set to “Off”, or during “Freeze”.
Turn off the projector and unplug the AC power cord. Let the
projector cool for at least 45 minutes.
Loosen the screw and slide the lamp cover to open it.
Loosen 3 screws of the lamp and pull out the lamp by using
the built in handle.
Replace the lamp with a new one. Make sure that the lamp
is properly and fully inserted.
Close the lamp cover and secure the screw.
When replacing the lamp because it has stopped illuminating,
there is a possibility that the lamp maybe broken. If replacing the
lamp of a projector which has been installed on the ceiling, you
should always assume that the lamp is broken, and you should
stand to the side of the lamp cover, not underneath it. Remove
the lamp cover gently. Small pieces of glass may fall out when
the lamp cover is opened. If pieces of glass get into your eyes or
mouth, seek medical advice immediately.
For continued safety, replace with a lamp of the same type lamp.
Do not drop the lamp or touch the glass bulb! The glass can shat-
ter and may cause injury.
CAUTION
1
2
3
4
5
Lamp
Handle
Lamp cover
Screw
New Lamp
Screws
Model LC-WXL200
Type No. POA-LMP136
Service Parts No. 610 346 9607
ORDER REPLACEMENT LAMP
![](https://csdnimg.cn/release/download_crawler_static/87447233/bg11.jpg)
-12-
The LAMP REPLACE indicator will light yellow when the total lamp used time (Corresponding value) reaches 3,000
hours. This is to indicate that lamp replacement is required.
The total lamp used time is calculated by using the below expression,
Total lamp used time (Corresponding value) = Teco + Tnormal x 1.5
Teco : used time in the Eco1 and Eco2 mode
Tnormal : used time in the Normal mode and Auto mode
You can check the lamp used time following to the below procedure.
1 Press and hold the ON/STAND-BY button on the projector or the ON button on the remote control for more than
20 seconds.
2 The projector used time and lamp used time will be displayed on the screen briefly as follows.
Counter
Projector 500H
Lamp
Normal 200H
Eco 300H
Corresponding value 600H
Projector used time
How to check Lamp Used Time
Maintenance
Lamp Total lamp used time
If the non-standard lamp is used, the warning and confirmation messages will appear on the screen every startup.
Some of the functions are limited when the non-standard lamp is used in spite of the warning.
Warning Message on the non-standard lamp used
Since the lamp is not standard,
projector failed to read lamp data.
Continue to use this lamp?
Yes
No
![](https://csdnimg.cn/release/download_crawler_static/87447233/bg12.jpg)
-13-
This projector provides a cabinet prism cover on the cabinet top to enhance the service maintenance. This enables
service personnel to align the optical adjustment or replace the optical parts without disassembly the cabinet top.
Maintenance
Quick maintenance
Prism cover
B
E
E
D
D
D
E
EE
E
Fig. 6
A
2
3
Loosen a screw-A on the lamp cover and slide it to
open (Fig. 1).
Loosen a screw-B on the prism cover and slide it in
the arrow direction (Fig. 2).
Loosen a screw-C and take the shutter assembly off
(Fig. 3).
Loosen 3 screws-D and take the LCD Panel/Prism
ass'y upward off (Fig. 4/Fig. 6).
Remove 2 screws-E on each stopper of the polarized
glass ass'y and take the polarized glass ass'y upward
off (Fig. 5/Fig. 6).
See chapter "Optical Parts Disassembly" for further
information of the optical parts disassembly.
1
4
5
Lamp cover
Fig. 1
Fig. 2
Fig. 4
Panel/Prism assy
Fig. 5
Polarized glass assy
Shutter assy
C
Fig. 3
Setting the Lamp Cover switch to "Service"
When aligning the optical parts with the lamp cover open,
the projector cannot be turned on because the lamp cover
switch is off. Insert the flat screw driver into the opening on
the switch and set the lamp cover switch to "service" position
as shown in the figure below.
After finishing the alignment, make sure that the lamp cover
switch is reset to its original position, and close the prism
cover and lamp cover securely.
Lamp cover switch
"Service" position
![](https://csdnimg.cn/release/download_crawler_static/87447233/bg13.jpg)
-14-
Maintenance
When replacing the lens or using an optional lens, install the lens by following the instructions below.
Remove the lens mount cover.
Fit the lens to the projector by aligning the red dot
on the lens with the red dot of the projector.
Slowly turn the lens clockwise until it clicks. Make
sure that the lens is fully inserted to the projector.
1
2
Attaching the lens to the projector
3
Red dots
CAUTION
Do not press the lens release button when at-
taching the lens.
Lens Installation
Shift the lens to the center position by using the
Lens shift function.
Turn off the projector and unplug the AC power
cord.
While pressing the Lens release button on the top
of the cabinet, turn the lens counterclockwise until
it stops and pull it out slowly from the projector.
1
2
Removing the lens
Lens Release button
CAUTION
Be careful when handling the lens. Do not
drop.
3
![](https://csdnimg.cn/release/download_crawler_static/87447233/bg14.jpg)
-15-
Using the Lens Antitheft screw
This projector provides a Lens antitheft screw to protect the projection lens stolen from a suspicious person.
Mount the Lens antitheft screw by following the instructions below.
Loosen a screw-A on the lamp cover and slide it to
open (Fig. 1).
Loosen a screw-B on the prism cover and slide it in
the arrow direction (Fig. 2).
Insert the Lens antitheft screw onto the screw hole
on the cabinet top and turn it until the lens release
button is locked (Fig. 3).
Close the prism cover and tighten the screw-B, and
close the lamp cover and tighten the screw-A.
Check that the lens release button is locked to pro-
tect the projection lens removing.
1
Mounting the Lens antitheft screw
2
Fig. 3
Lens Antitheft
screw
3
4
Note: Be careful not to drop the Lens Antitheft screw into
the opening of the projector when mounting the
screw.
Maintenance
Prism cover
B
A
Lamp cover
Fig. 1
Fig. 2
Lens release button
剩余180页未读,继续阅读
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://profile-avatar.csdnimg.cn/default.jpg!1)
qingguo1979
- 粉丝: 31
- 资源: 7295
上传资源 快速赚钱
我的内容管理 展开
我的资源 快来上传第一个资源
我的收益
登录查看自己的收益我的积分 登录查看自己的积分
我的C币 登录后查看C币余额
我的收藏
我的下载
下载帮助
![](https://csdnimg.cn/release/wenkucmsfe/public/img/voice.245cc511.png)
最新资源
- AirKiss技术详解:无线传递信息与智能家居连接
- Hibernate主键生成策略详解
- 操作系统实验:位示图法管理磁盘空闲空间
- JSON详解:数据交换的主流格式
- Win7安装Ubuntu双系统详细指南
- FPGA内部结构与工作原理探索
- 信用评分模型解析:WOE、IV与ROC
- 使用LVS+Keepalived构建高可用负载均衡集群
- 微信小程序驱动餐饮与服装业创新转型:便捷管理与低成本优势
- 机器学习入门指南:从基础到进阶
- 解决Win7 IIS配置错误500.22与0x80070032
- SQL-DFS:优化HDFS小文件存储的解决方案
- Hadoop、Hbase、Spark环境部署与主机配置详解
- Kisso:加密会话Cookie实现的单点登录SSO
- OpenCV读取与拼接多幅图像教程
- QT实战:轻松生成与解析JSON数据
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
![](https://img-home.csdnimg.cn/images/20220527035711.png)
![](https://img-home.csdnimg.cn/images/20220527035711.png)
![](https://img-home.csdnimg.cn/images/20220527035111.png)
安全验证
文档复制为VIP权益,开通VIP直接复制
![](https://csdnimg.cn/release/wenkucmsfe/public/img/green-success.6a4acb44.png)