设置如下:
3$
/1'*#/'!
#/7#';;#!!!#!
#**5'#!!!!!!
3$
/1'*#/'!
#/7#';;#!!!#!
R
3. 举例使用 E1 线路实现多个 64K 专线连接.
相关命令:
任务 命令
进入 * 配置模式
*#P#O#Q#number
选择帧类型
1'./,#P**#O#0**Q
选择 /0*; 类型
/*;#P'./#O#("U#O#;(Q#
建立逻辑通道组与时隙的映射
*'0,$7#number#/.#range
显示 * 接口状态
@#*##<slot/port=
#
注## 当链路为 时*'0,$7 编号为 !0#/. 范围 02# 当链路为 时
*'0,$7 编号为 !0!#/. 范围 0##
####使用 @#*# 观察 * 状态以下为帧类型为 ** 时 * 正常
的状态
Router# show controllers e1
e1 0/0 is up.
Applique type is Channelized E1 - unbalanced
Framing is CRC4, Line Code is HDB3 No alarms detected.
Data in current interval (725 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours) 0 Line Code Violations, 0 Path Code Violations,
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
以下例子为 E1 连接 3 条 64K 专线, 帧类型为 NO-CRC4,非平衡链路,路由器具体设置如下:
shanxi#wri t
Building configuration...
Current configuration: