Arcam雅俊ST60安装说明书.pdf_ST60A3USB2.0/SKL5010的作用

版权申诉

用户手册

63 浏览量更新于2024-03-09 评论收藏 210KB PDF 举报

身份认证购VIP最低享 7 折!

领优惠券(最高得80元）

资源详情

资源评论

资源推荐

Answer codes

The following answer codes are dened:

• 0x00 – Status update.

• 0x82 – Zone Invalid.

• 0x83 – Command not recognised.

• 0x84 – Parameter not recognised.

• 0x85 – Command invalid at this time (see NOTE below)

• 0x86 – Invalid data length.

NOTE: Certain commands cannot be processed when the Setup Menu is being displayed. An answer code of 0x85 will be returned in these circumstances. Also,

commands for tuner control cannot be processed when the tuner input is not selected, etc.

State changes as a result of other inputs

It is possible that the state of the ST60 may be changed as a result of user input via front panel or remote. Any change resulting from these inputs is relayed to

the RC using the appropriate message type.

Reserved Commands

Commands 0xF0 to 0xFF (inclusive) are reserved for test functions and should never be used.

Example command and response sequence

As an example, the command to simulate the RC5 command “16-16” (increase volume):

St Zn Cc Dl Data 1 Data 2 Et

0x21 0x01 0x08 0x02 0x10 0x10 0x0D

Assuming that the command was accepted by the ST60 and is being processed, the ST60 responds to this command with the following sequence:

St Zn Cc Ac Dl Data 1 Data 2 Et

0x21 0x01 0x08 0x00 0x02 0x10 0x10 0x0D

AMX Duet™ support

The ST60 shall be fully compatible with AMX Duet™ Dynamic Device Discovery Protocol (DDDP). The following description of Dynamic Device Discovery comes

from the AMX website (www.amx.com). Dynamic Device Discovery is part of AMX’s Duet™ platform, which combines the proven reliability and power of

NetLinx® with the extensive capabilities of the Java 2 Micro Edition (J2ME) platform. When integrating a serial or IP device from a manufacturer embedding the

Dynamic Device Discovery Protocol (DDDP), Duet recognizes the device and loads the appropriate Duet module, which automatically installs the new device.

AMX’s NetLinx Master can then nd and install the Duet device module either from a library on the master, from AMX’s web site, or from the manufacturer’s web

site. Duet also allows for device swapping so that programming changes are not required when devices with DDDP are removed or replaced – a huge benet

for end users. The Duet platform is an extension AMX’s InConcert® manufacturer partner program, which was developed to ensure seamless communication

between partners’ devices and the AMX control system.

Data is specied in the ASCII format. All ASCII characters between the quotes “” should be recognised/transmitted. “\r” is a carriage return (0x0D).

Command: “AMX\r”

Response: “AMXB<Device-SDKClass=Amplier><Device-Make=ARCAM><Device-Model=ST60><Device-Revision=x.y.z>\r”

Where,

x.y.z = RS232 protocol version number.

剩余19页未读，继续阅读