赫优讯netTAP NT151-RE-RE实时以太网网关用户手册

版权申诉

5星 · 超过95%的资源 131 浏览量更新于2024-07-20 收藏 3.39MB PDF 举报

"赫优讯智能网关netTAP_NT_151-RE-RE_UM_用户手册.pdf" 这本用户手册详细介绍了赫优讯（Hilscher）的智能网关netTAP_NT_151-RE-RE，这是一款实时以太网网关，主要用于不同网络之间的数据交换和通信。手册旨在帮助用户理解和操作该设备，确保其在工业自动化系统中的安全、高效应用。 1. 引言 - 关于文档：手册提供了关于netTAP_NT_151-RE-RE功能、安装、配置和维护的所有必要信息。 - 内容描述：包含了设备的硬件和软件特性，以及配套软件和驱动的引用。 - 阅读手册的义务：用户应仔细阅读手册，以确保正确使用和避免潜在风险。 - 版本修订记录：列出了手册的更新历史，方便用户跟踪最新变更。 - 文档约定：说明了手册中使用的符号、术语和约定，帮助理解内容。 - 产品DVD内容：概述了随设备提供的DVD包含的软件和文档。 2. 文档概述 - 除此之外，手册还涵盖了产品的法律注意事项，包括版权信息、使用许可等。 - 注册商标：列出赫优讯公司及相关产品的注册商标。 3. 安全指南 - 一般注意事项：强调了遵循操作规程的重要性，以确保设备和人员的安全。 - 设备用途：定义了设备的正确使用场景，避免误用。 - 人员资质：建议具备相应技术知识的人员进行设备操作和维护。 - 安全参考：提供了识别和遵循安全标志的方法。 - 避免人身伤害的安全指示：详细阐述了可能的风险，如不安全的系统操作，并给出了相应的预防措施。 - 避免财产损失的安全指示：提醒用户注意设备供电电压、过热、过度写入/删除操作可能导致的损坏，并提供了防范方法。手册中的"安全"部分特别强调了人身安全和设备安全的重要性，对可能遇到的各种危险情况进行了详尽的解释，包括不安全的操作环境和可能导致设备损坏的因素。通过这些详细的安全指导，用户可以更加谨慎地处理设备，减少潜在风险。此外，手册还包含设备的标识、操作步骤、故障排查、维护保养、以及详细的网络配置和协议支持等内容。用户可以借此全面了解如何设置、监控和维护netTAP_NT_151-RE-RE智能网关，以实现其在工业自动化系统中的核心功能，即高效、可靠的数据传输和网络通信。

Introduction 15/92

1.4 Legal notes

The images, photographs and texts in the accompanying materials (in the

form of a user's manual, operator's manual, Statement of Work document

and all other document types, support texts, documentation, etc.) are

protected by German and international copyright and by international trade

and protective provisions. Without the prior written consent, you do not

have permission to duplicate them either in full or in part using technical or

mechanical methods (print, photocopy or any other method), to edit them

using electronic systems or to transfer them. You are not permitted to make

changes to copyright notices, markings, trademarks or ownership

declarations. Illustrations are provided without taking the patent situation

into account. Any company names and product designations provided in

this document may be brands or trademarks by the corresponding owner

and may be protected under trademark, brand or patent law. Any form of

further use shall require the express consent from the relevant owner of the

rights.

Important notes

Utmost care was/is given in the preparation of the documentation at hand

consisting of a user's manual, operating manual and any other document

type and accompanying texts. However, errors cannot be ruled out.

Therefore, we cannot assume any guarantee or legal responsibility for

erroneous information or liability of any kind. You are hereby made aware

that descriptions found in the user's manual, the accompanying texts and

the documentation neither represent a guarantee nor any indication on

proper use as stipulated in the agreement or a promised attribute. It cannot

be ruled out that the user's manual, the accompanying texts and the

documentation do not completely match the described attributes, standards

or any other data for the delivered product. A warranty or guarantee with

respect to the correctness or accuracy of the information is not assumed.

We reserve the right to modify our products and the specifications for such

as well as the corresponding documentation in the form of a user's manual,

operating manual and/or any other document types and accompanying

texts at any time and without notice without being required to notify of said

modification. Changes shall be taken into account in future manuals and do

not represent an obligation of any kind, in particular there shall be no right

to have delivered documents revised. The manual delivered with the

product shall apply.

Under no circumstances shall Hilscher Gesellschaft für Systemautomation

mbH be liable for direct, indirect, ancillary or subsequent damage, or for

any loss of income, which may arise after use of the information contained

herein.

netTAP NT 151-RE-RE | Real-Time Ethernet gateway

Introduction 16/92

Liability disclaimer

The hardware and/or software was created and tested by Hilscher

Gesellschaft für Systemautomation mbH with utmost care and is made

available as is. No warranty can be assumed for the performance or

flawlessness of the hardware and/or software under all application

conditions and scenarios and the work results achieved by the user when

using the hardware and/or software. Liability for any damage that may have

occurred as a result of using the hardware and/or software or the

corresponding documents shall be limited to an event involving willful intent

or a grossly negligent violation of a fundamental contractual obligation.

However, the right to assert damages due to a violation of a fundamental

contractual obligation shall be limited to contract-typical foreseeable

damage.

It is hereby expressly agreed upon in particular that any use or utilization of

the hardware and/or software in connection with

· Flight control systems in aviation and aerospace;

· Nuclear fusion processes in nuclear power plants;

· Medical devices used for life support and

· Vehicle control systems used in passenger transport

shall be excluded. Use of the hardware and/or software in any of the

following areas is strictly prohibited:

· For military purposes or in weaponry;

· For designing, engineering, maintaining or operating nuclear systems;

· In flight safety systems, aviation and flight telecommunications systems;

· In life-support systems;

· In systems in which any malfunction in the hardware and/or software

may result in physical injuries or fatalities.

You are hereby made aware that the hardware and/or software was not

created for use in hazardous environments, which require fail-safe control

mechanisms. Use of the hardware and/or software in this kind of

environment shall be at your own risk; any liability for damage or loss due

to impermissible use shall be excluded.

netTAP NT 151-RE-RE | Real-Time Ethernet gateway

Introduction 17/92

Warranty

Hilscher Gesellschaft für Systemautomation mbH hereby guarantees that

the software shall run without errors in accordance with the requirements

listed in the specifications and that there were no defects on the date of

acceptance. The warranty period shall be 12 months commencing as of the

date of acceptance or purchase (with express declaration or implied, by

customer's conclusive behavior, e.g. putting into operation permanently).

The warranty obligation for equipment (hardware) we produce is 36

months, calculated as of the date of delivery ex works. The aforementioned

provisions shall not apply if longer warranty periods are mandatory by law

pursuant to Section 438 (1.2) BGB, Section 479 (1) BGB and Section 634a

(1) BGB [Bürgerliches Gesetzbuch; German Civil Code] If, despite of all

due care taken, the delivered product should have a defect, which already

existed at the time of the transfer of risk, it shall be at our discretion to

either repair the product or to deliver a replacement product, subject to

timely notification of defect.

The warranty obligation shall not apply if the notification of defect is not

asserted promptly, if the purchaser or third party has tampered with the

products, if the defect is the result of natural wear, was caused by

unfavorable operating conditions or is due to violations against our

operating regulations or against rules of good electrical engineering

practice, or if our request to return the defective object is not promptly

complied with.

Costs of support, maintenance, customization and product care

Please be advised that any subsequent improvement shall only be free of

charge if a defect is found. Any form of technical support, maintenance and

customization is not a warranty service, but instead shall be charged extra.

Additional guarantees

Although the hardware and software was developed and tested in-depth

with greatest care, Hilscher Gesellschaft für Systemautomation mbH shall

not assume any guarantee for the suitability thereof for any purpose that

was not confirmed in writing. No guarantee can be granted whereby the

hardware and software satisfies your requirements, or the use of the

hardware and/or software is uninterruptable or the hardware and/or

software is fault-free.

It cannot be guaranteed that patents and/or ownership privileges have not

been infringed upon or violated or that the products are free from third-party

influence. No additional guarantees or promises shall be made as to

whether the product is market current, free from deficiency in title, or can be

integrated or is usable for specific purposes, unless such guarantees or

promises are required under existing law and cannot be restricted.

netTAP NT 151-RE-RE | Real-Time Ethernet gateway

Introduction 18/92

Confidentiality

The customer hereby expressly acknowledges that this document contains

trade secrets, information protected by copyright and other patent and

ownership privileges as well as any related rights of Hilscher Gesellschaft

für Systemautomation mbH. The customer agrees to treat as confidential all

of the information made available to customer by Hilscher Gesellschaft für

Systemautomation mbH and rights, which were disclosed by Hilscher

Gesellschaft für Systemautomation mbH and that were made accessible as

well as the terms and conditions of this agreement itself.

The parties hereby agree to one another that the information that each

party receives from the other party respectively is and shall remain the

intellectual property of said other party, unless provided for otherwise in a

contractual agreement.

The customer must not allow any third party to become knowledgeable of

this expertise and shall only provide knowledge thereof to authorized users

as appropriate and necessary. Companies associated with the customer

shall not be deemed third parties. The customer must obligate authorized

users to confidentiality. The customer should only use the confidential

information in connection with the performances specified in this

agreement.

The customer must not use this confidential information to his own

advantage or for his own purposes or rather to the advantage or for the

purpose of a third party, nor must it be used for commercial purposes and

this confidential information must only be used to the extent provided for in

this agreement or otherwise to the extent as expressly authorized by the

disclosing party in written form. The customer has the right, subject to the

obligation to confidentiality, to disclose the terms and conditions of this

agreement directly to his legal and financial consultants as would be

required for the customer's normal business operation.

Export provisions

The delivered product (including technical data) is subject to the legal

export and/or import laws as well as any associated regulations of various

countries, especially such laws applicable in Germany and in the United

States. The products / hardware / software must not be exported into such

countries for which export is prohibited under US American export control

laws and its supplementary provisions. You hereby agree to strictly follow

the regulations and to yourself be responsible for observing them. You are

hereby made aware that you may be required to obtain governmental

approval to export, reexport or import the product.

Terms and conditions

Please read the notes about additional legal aspects on our netIOT web

site under http://www.netiot.com/netiot/netiot-edge/terms-and-

conditions/.

netTAP NT 151-RE-RE | Real-Time Ethernet gateway

剩余91页未读，继续阅读

AAA_自动化工程师

粉丝: 6973
资源: 3433

赫优讯netTAP NT151-RE-RE实时以太网网关用户手册

赫优讯NT151网关用户手册.rar

德国赫优讯NT 151-RE-RE网关操作指南（Profinet从站转EtherCAT主站）.pdf

赫优讯netTAP-151_网关NT151中文手册.pdf

netTAP 151_Datasheet_06-2016_CN产品样本.pdf

赫优讯 netTAP的配置手册.pdf

德国赫优讯(Hilscher)netTAP软件配置操作手册.pdf

德国赫优讯netTAP网关在西门子RFID中的应用

德国赫优讯（Hilscher）netTAP通用型网关产品说明.pdf

赫优讯netTAP NT30 DPS-RS2现场总线串行网关试验及配置指南

如何配置赫优讯netTAP NT151-RE-RE智能网关以实现Real-Time Ethernet通信？请提供详细的步骤和注意事项。

最新资源