i-Series对讲机工作站安全操作与安装指南

版权申诉

193 浏览量更新于2024-06-14 收藏 3.32MB PDF 举报

本手册是关于INTERCOM STATIONS i-Series 对讲机工作站的详细操作指南。由Vitec Group Communications, Inc. 出版，版权日期为2005年，Part Number为810305 Rev.2。该手册旨在帮助用户理解和掌握i-Series对讲机的工作原理、安全注意事项以及具体操作流程。 **重要安全指示** 在开始使用之前，必须仔细阅读并遵循手册中的安全指引，确保设备的正确安装和使用方法，避免任何可能的人身伤害或设备损坏。安全事项涵盖电源管理、静电防护、接地等方面，以保证操作人员的安全和系统稳定性。 **i-Series对讲机站功能介绍** i-Series系列对讲机工作站具备一系列先进的特性和模块，包括： 1. **Key Module**：基本的按键模块，用于执行简单的通话和控制功能。 2. **Function Key Module**：带有可编程功能键的模块，提供自定义操作选项，如快速呼叫、菜单导航等。 3. **Mic-Headset Module**：配备麦克风和耳机，方便手持通话或集成到头戴式设备中。 4. **Level-Control Module**：音量控制模块，确保清晰的语音通信质量，支持多级别的音量调节。 5. **Auxiliary Options Module**：扩展模块，允许用户添加额外的功能，如音频输入/输出接口，以适应不同场景的需求。 **构建i-Series对讲机站** 手册详细介绍了如何根据需求选择和连接不同的模块来构建一个完整的对讲机工作站，包括模块的安装顺序和布局建议。 **启动序列** 针对非显示键模块、显示键模块和功能键模块，手册分别提供了详细的启动步骤，确保设备在正确状态下运行。这些步骤包括检查电源、连接硬件和配置设置。 **前部面板控制与指示灯** 用户界面的介绍至关重要，前部面板上的控制按钮、指示灯和显示屏有助于用户直观地了解设备状态和进行操作。每个组件的功能及其在不同工作模式下的表现都进行了详述。 **术语说明** 手册中可能会有一些专业术语，以确保用户对特定功能和操作有准确的理解。因此，阅读者需注意理解这些术语，以便正确地运用到实际操作中。本i-Series对讲机工作站说明书是一份全面的参考工具，涵盖了从安全操作到系统搭建，再到日常维护和故障排除的全方位指导。无论你是初次接触此设备的用户还是经验丰富的技术人员，这份手册都将为你提供宝贵的资源。

i-SERIES INSTRUCTION MANUAL

1-8

ABOUT DISPLAYS

The 5-character name, or “label,” that you assign to a key is displayed next to the

key on the key module. The labels on the upper row refer to their corresponding

upper-row keys and the labels on the lower row refer to their corresponding

lower-row keys.

Figure 7: Key Module

Display stations have full-graphic LED-backlit displays that you program from

the Eclipse Configuration System. Non-display stations have metal grooves into

which paper labels can be inserted. Paper labels can be printed from the Eclipse

Configuration System.

ABOUT KEYS

Each key on any key module can be assigned as a talk, a listen, or a

talk-with-listen from the Eclipse Configuration System. See the Eclipse

Configuration System Manual for more information.

Temporary or Latched Action

When you press a key to talk or listen, the key can be switched on either

temporarily or continuously.

When you switch a key on temporarily, it is active for the particular period of

time you require. Press and hold the key down for the desired length of time

needed to talk or listen, then release the key to return it to its non-active state.

You will only be able to talk or listen while you press the key.

Continuous or “latched” action allows you to lock a key into place, so that you

can talk or listen hands-free. Quickly tap a key to “latch” or “lock” it into place to

talk or listen. The key will glow brightly to indicate that it is active. The key will

remain latched until you tap it again to return it to its non-active state.

Active and Non-Active Keys

When you activate a key—that is, when you press or latch the key to talk or

listen— the key becomes bright red or green. When you press or latch an

assigned talk key, the key lights up bright red while you talk to the destination.

Keys

Alphanumeric Key

Names or "Labels"

+Cams

Phone

Dir

IFB-1

IFB-3

IFB-2

PGM

Active keys are bright red or

green. Non-active keys are

dim red or green. Keys that

are not assigned are off,

with no illumination.

i-SERIES INSTRUCTION MANUAL

1-9

When you press or latch an assigned listen key, the key lights up bright green

while you listen to the source.

Otherwise, a key that is not active—that is, a key that is not being used to talk or

listen— will be dimmed: dim red for a talk or talk-with-listen key; dim green for

a listen key.

Table 1 shows the key colors associated with active or non-active talk, listen, or

talk-with-listen keys.

Table 1: Key Colors for Active and Non-Active Keys

ABOUT LIGHTS

A key can be programmed to light up in a variety of ways to indicate its status.

These options are discussed in the following sections. If you decide to use one of

these options, it must usually first be set up in the Eclipse Configuration System.

A table summarizing all of the light options is located at the end of the section.

Call-Waiting Light

A key will flash rapidly (four times per second) when a source calls you. When

you press the key to talk, the key becomes bright red to indicate that it is active.

When you release the key, it becomes dim red to indicate that it is not active, if

the source is no longer sending audio.

If a key is active when a second source calls you, the key will not flash at the

call-waiting rate, but will continue to glow solidly bright red to indicate that it is

active. You will know another source is calling because you will hear their audio,

the answer-back key will blink, and the source’s label will appear in the display

above the answer-back key. You can answer the second source by pressing the

answer-back key.

KEY ACTIVE NON-ACTIVE

TALK

A talk key glows bright

red when you press or

latch the key to talk.

A talk key glows dim

red when it is not

active.

LISTEN

A listen key glows bright

green when you press or

latch the key to listen.

A listen key glows dim

green when it is not

active.

TALK-WITH-LISTEN

A talk-with-listen key

glows bright red when you

press or latch the key to

talk.

When you activate a

listen, the talk-with-listen

key will glow bright green.

If in talk mode, a

talk-with-listen key

glows dim red when

not active.

There is no non-active

listen mode. A

talk-with-listen key

always reverts to

non-active talk.

i-SERIES INSTRUCTION MANUAL

1-10

This option is set up by default in the Eclipse Configuration System, and it can

be changed or cancelled if desired. Both the call-waiting light flash length and the

amount of time the light flashes before the call is removed from the answer-back

stack are programmable in the Eclipse Configuration System. See the Eclipse

Configuration System Manual for more information.

In-Use Light

A key will double-flash once per second to indicate that a destination you are

trying to call is in use.

The in-use light is a feature that must be set up in the Eclipse Configuration

System. For more information, see the Eclipse Configuration System Manual.

Telephone Off-Hook Light

A key will flash red once per second if a telephone interface is assigned to that

key, and the telephone interface is off-hook. The central matrix will cause each

key assigned to the telephone interface on every station in the system to flash at

the off-hook rate whenever the telephone interface is active (off-hook) at one or

more of the stations.

If you press or latch a key that is flashing at the telephone off-hook rate, the key

will glow solidly bright red to indicate that the key is active. When you release

the key, it will resume flashing at the telephone off-hook rate.

The telephone off-hook light is set up by default in the Eclipse Configuration

System. For more information, see the Eclipse Configuration System Manual.

Radio-Receiver Active Light

The green light on a key will flash once per second if a radio receiver is assigned

to that key, and the radio receiver is active. The central matrix will cause each key

assigned to the radio receiver on every station in the system to flash at the

radio-receiver active rate whenever the radio receiver is active at one or more of

the stations.

If you press or latch a key that is flashing at the radio-receiver active rate, the key

will glow solidly bright green to indicate that the key is active. When you release

the key, it will resume flashing at the radio-receiver active rate.

The radio-receiver active light is a feature that must be set up in the Eclipse

Configuration System. For more information, see the Eclipse Configuration

System Manual.

Audio-Presence Light

If you assign a source to your station as a listen-only key, the key will flash green

once per second if there is audio present at the source.

剩余101页未读，继续阅读

wwwarewow

粉丝: 4672
资源: 2529

i-Series对讲机工作站安全操作与安装指南

网络对讲机源码解析：intercom-master功能与应用

Ruby版test_app_intercom：对讲机轨道测试小程序

FCC认证对讲机发射测试指标解析

intercom:对讲机对讲机 对讲机对讲机

intercom:SIP 对讲机

angular-intercom:Angular对讲机包装器

FCC.zip_intercom_对讲机_对讲机发射_频偏限制

intercom-cordova:对讲机的CordovaPhoneGap插件

intercom-hue:对讲机新消息提示色相警报

intercom-master_47479com_对讲_对讲机_masterintercomsjd_网络对讲机_源码

最新资源

intercom:对讲机对讲机对讲机对讲机