uIP1.0协议栈中文翻译：嵌入式TCP/IP详解

UIP1.0

2星需积分: 10 69 浏览量更新于2024-07-19 收藏 2.19MB PDF 举报

身份认证购VIP最低享 7 折!

领优惠券(最高得80元）

"UIP1.0英文翻译成中文的资料，包括了UIP协议的详细介绍，提供中英文对照阅读，适合学习和理解UIP协议。" 这篇文档详细介绍了UIP1.0，这是一个轻量级的嵌入式TCP/IP协议栈。UIP，即User Datagram Protocol-based Internet Protocol，是针对资源有限的嵌入式设备设计的，它在保持低内存占用的同时提供了TCP/IP的基本功能。 1. UIP TCP/IP协议栈 - **简介**：UIP是一个面向微控制器和嵌入式系统的TCP/IP实现，它具有极小的内存需求，适用于那些资源有限但又需要网络连接的设备。 - **TCP/IP通信**：UIP支持TCP（传输控制协议）和UDP（用户数据报协议），以及ICMP（Internet控制消息协议）和ARP（地址解析协议）等基本的网络协议，使设备能够进行网络通信。 - **主控制循环**：UIP的工作流程通常包含一个主控制循环，处理网络事件和数据包的发送与接收。 - **架构特定函数**：根据目标硬件平台的不同，UIP提供了特定的函数来适应不同的硬件特性。 - **内存管理**：UIP的内存管理机制是为了在有限的内存环境中高效工作，如使用固定大小的缓冲区等。 - **应用编程接口（API）**：UIP提供了一套API，使得开发者可以编写应用程序，利用TCP/IP功能进行通信。 - **示例**：文档中包含了多个示例代码，帮助开发者理解和使用UIP协议栈。 2. UIP1.0模块索引和层次结构 - **模块索引**：列出UIP1.0的所有模块，方便查找和理解各部分功能。 - **类层次结构**：展示了UIP1.0的模块组织结构，有助于理解它们之间的关系。 3. 数据结构索引 - **数据结构**：UIP使用的一系列特定数据结构，如协议头部、缓冲区等，这些结构用于存储和处理网络数据。 4. 文件索引 - **文件列表**：提供了UIP1.0的所有源文件清单，便于开发者查找和修改代码。 5. 模块文档 - **Protothreads**：UIP中的Protothreads是一种轻量级线程实现，允许在资源受限的系统上实现并发。 - **应用**：包含了各种基于UIP的应用程序示例，如HTTP服务器、FTP客户端等。 - **配置函数**：UIP的配置函数用于设置协议栈的行为，如打开或关闭特定服务。 - **初始化函数**：启动和配置UIP协议栈的函数。 - **设备驱动函数**：与硬件交互，处理网络接口的输入和输出。 - **应用函数**：用于应用程序与UIP交互，发送和接收数据的函数。 - **转换函数**：提供数据转换功能，如IP地址和端口号的解析和转换。这份翻译文档是学习和研究UIP协议的宝贵资源，通过中英文对照，读者可以更深入地理解协议细节，同时也为开发基于UIP的嵌入式网络应用提供了基础。

资源详情

资源推荐

10 The uIP TCP/IP stack

1.7.4 Utilizing TCP Flow Control

This example shows a simple application that connects to a host, sends an HTTP request for a ﬁle and

downloads it to a slow device such a disk drive. This shows how to use the ﬂow control functions of uIP.

void example4_init(void) {

uip_ipaddr_t ipaddr;

uip_ipaddr(ipaddr, 192,168,0,1);

uip_connect(ipaddr, HTONS(80));

}

void example4_app(void) {

if(uip_connected() || uip_rexmit()) {

uip_send("GET /file HTTP/1.0\r\nServer:192.186.0.1\r\n\r\n",

48);

return;

}

if(uip_newdata()) {

device_enqueue(uip_appdata, uip_datalen());

if(device_queue_full()) {

uip_stop();

}

if(uip_poll() && uip_stopped()) {

if(!device_queue_full()) {

uip_restart();

}

When the connection has been established, an HTTP request is sent to the server. Since this is the only

data that is sent, the application knows that if it needs to retransmit any data, it is that request that should

be retransmitted. It is therefore possible to combine these two events as is done in the example.

When the application receives new data from the remote host, it sends this data to the device by using

the function device_enqueue(). It is important to note that this example assumes that this function copies

the data into its own buffers. The data in the uip_appdata buffer will be overwritten by the next incoming

packet.

If the device’s queue is full, the application stops the data from the remote host by calling the uIP function

uip_stop(). The application can then be sure that it will not receive any new data until uip_restart() is called.

The application polling event is used to check if the device’s queue is no longer full and if so, the data ﬂow

is restarted with uip_restart().

1.7.5 A Simple Web Server

This example shows a very simple ﬁle server application that listens to two ports and uses the port number

to determine which ﬁle to send. If the ﬁles are properly formatted, this simple application can be used as a

web server with static pages. The implementation follows.

struct example5_state {

char

dataptr;

unsigned int dataleft;

};

void example5_init(void) {

uip_listen(HTONS(80));

uip_listen(HTONS(81));

Generated on Mon Jun 12 11:56:02 2006 for uIP 1.0 by Doxygen

利用TCP流量控制

一个简单的Web服务器

1.7 Examples 11

}

void example5_app(void) {

struct example5_state

s = (struct example5_state)uip_conn->appstate;

if(uip_connected()) {

switch(uip_conn->lport) {

case HTONS(80):

s->dataptr = data_port_80;

s->dataleft = datalen_port_80;

break;

case HTONS(81):

s->dataptr = data_port_81;

s->dataleft = datalen_port_81;

break;

}

uip_send(s->dataptr, s->dataleft);

return;

}

if(uip_acked()) {

if(s->dataleft < uip_mss()) {

uip_close();

return;

}

s->dataptr += uip_conn->len;

s->dataleft -= uip_conn->len;

uip_send(s->dataptr, s->dataleft);

}

The application state consists of a pointer to the data that should be sent and the size of the data that is left

to send. When a remote host connects to the application, the local port number is used to determine which

ﬁle to send. The ﬁrst chunk of data is sent using

uip_send(). uIP makes sure that no more than MSS bytes

of data is actually sent, even though s->dataleft may be larger than the MSS.

The application is driven by incoming acknowledgments. When data has been acknowledged, new data

can be sent. If there is no more data to send, the connection is closed using uip_close().

1.7.6 Structured Application Program Design

When writing larger programs using uIP it is useful to be able to utilize the uIP API in a structured way.

The following example provides a structured design that has showed itself to be useful for writing larger

protocol implementations than the previous examples showed here. The program is divided into an uIP

event handler function that calls seven application handler functions that process new data, act on acknowl-

edged data, send new data, deal with connection establishment or closure events and handle errors. The

functions are called newdata(), acked(), senddata(), connected(), closed(), aborted(), and timedout(), and

needs to be written speciﬁcally for the protocol that is being implemented.

The uIP event handler function is shown below.

void example6_app(void) {

if(uip_aborted()) {

aborted();

}

if(uip_timedout()) {

timedout();

}

if(uip_closed()) {

closed();

}

Generated on Mon Jun 12 11:56:02 2006 for uIP 1.0 by Doxygen

结构化的应用程序设计

1.7 Examples 13

s->textlen -= uip_conn->len;

s->textptr += uip_conn->len;

if(s->textlen == 0) {

switch(s->state) {

case STATE_HELLO:

s->state = STATE_WORLD;

s->textptr = "world!\n";

s->textlen = 7;

break;

case STATE_WORLD:

uip_close();

break;

}

static void senddata(void) {

struct example6_state

s = (struct example6_state

)uip_conn->appstate;

if(s->textlen > 0) {

uip_send(s->textptr, s->textlen);

}

The application state consists of a "state" variable, a "textptr" pointer to a text message and the "textlen"

length of the text message. The "state" variable can be either "STATE_WAITING", meaning that the

application is waiting for data to arrive from the network, "STATE_HELLO", in which the application is

sending the "Hello" part of the message, or "STATE_WORLD", in which the application is sending the

"world!" message.

The application does not handle errors or connection closing events, and therefore the aborted(), timedout()

and closed() functions are implemented as empty functions.

The connected() function will be called when a connection has been established, and in this case sets the

"state" variable to be "STATE_WAITING" and the "textlen" variable to be zero, indicating that there is no

message to be sent out.

When new data arrives from the network, the newdata() function will be called by the event handler func-

tion. The newdata() function will check if the connection is in the "STATE_WAITING" state, and if so

switches to the "STATE_HELLO" state and registers a 6 byte long "Hello " message with the connection.

This message will later be sent out by the senddata() function.

The acked() function is called whenever data that previously was sent has been acknowleged by the receiv-

ing host. This acked() function ﬁrst reduces the amount of data that is left to send, by subtracting the length

of the previously sent data (obtained from "uip_conn → len") from the "textlen" variable, and also adjusts

the "textptr" pointer accordingly. It then checks if the "textlen" variable now is zero, which indicates that all

data now has been successfully received, and if so changes application state. If the application was in the

"STATE_HELLO" state, it switches state to "STATE_WORLD" and sets up a 7 byte "world!\n" message

to be sent. If the application was in the "STATE_WORLD" state, it closes the connection.

Finally, the senddata() function takes care of actually sending the data that is to be sent. It is called by

the event handler function when new data has been received, when data has been acknowledged, when

a new connection has been established, when the connection is polled because of inactivity, or when a

retransmission should be made. The purpose of the senddata() function is to optionally format the data that

is to be sent, and to call the

uip_send() function to actually send out the data. In this particular example,

the function simply calls

uip_send() with the appropriate arguments if data is to be sent, after checking if

data should be sent out or not as indicated by the "textlen" variable.

It is important to note that the senddata() function never should affect the application state; this should only

be done in the acked() and newdata() functions.

Generated on Mon Jun 12 11:56:02 2006 for uIP 1.0 by Doxygen

14 The uIP TCP/IP stack

1.8 Protocol Implementations

The protocols in the TCP/IP protocol suite are designed in a layered fashion where each protocol performs

a speciﬁc function and the interactions between the protocol layers are strictly deﬁned. While the layered

approach is a good way to design protocols, it is not always the best way to implement them. In uIP, the

protocol implementations are tightly coupled in order to save code space.

This section gives detailed information on the speciﬁc protocol implementations in uIP.

1.8.1 IP — Internet Protocol

When incoming packets are processed by uIP, the IP layer is the ﬁrst protocol that examines the packet.

The IP layer does a few simple checks such as if the destination IP address of the incoming packet matches

any of the local IP address and veriﬁes the IP header checksum. Since there are no IP options that are

strictly required and because they are very uncommon, any IP options in received packets are dropped.

1.8.1.1 IP Fragment Reassembly

IP fragment reassembly is implemented using a separate buffer that holds the packet to be reassembled. An

incoming fragment is copied into the right place in the buffer and a bit map is used to keep track of which

fragments have been received. Because the ﬁrst byte of an IP fragment is aligned on an 8-byte boundary,

the bit map requires a small amount of memory. When all fragments have been reassembled, the resulting

IP packet is passed to the transport layer. If all fragments have not been received within a speciﬁed time

frame, the packet is dropped.

The current implementation only has a single buffer for holding packets to be reassembled, and therefore

does not support simultaneous reassembly of more than one packet. Since fragmented packets are uncom-

mon, this ought to be a reasonable decision. Extending the implementation to support multiple buffers

would be straightforward, however.

1.8.1.2 Broadcasts and Multicasts

IP has the ability to broadcast and multicast packets on the local network. Such packets are addressed

to special broadcast and multicast addresses. Broadcast is used heavily in many UDP based protocols

such as the Microsoft Windows ﬁle-sharing SMB protocol. Multicast is primarily used in protocols used

for multimedia distribution such as RTP. TCP is a point-to-point protocol and does not use broadcast or

multicast packets. uIP current supports broadcast packets as well as sending multicast packets. Joining

multicast groups (IGMP) and receiving non-local multicast packets is not currently supported.

1.8.2 ICMP — Internet Control Message Protocol

The ICMP protocol is used for reporting soft error conditions and for querying host parameters. Its main

use is, however, the echo mechanism which is used by the "ping" program.

The ICMP implementation in uIP is very simple as itis restricted to only implement ICMP echo messages.

Replies to echo messages are constructed by simply swapping the source and destination IP addresses of

incoming echo requests and rewriting the ICMP header with the Echo-Reply message type. The ICMP

checksum is adjusted using standard techniques (see RFC1624).

Since only the ICMP echo message is implemented, there is no support for Path MTU discovery or ICMP

redirect messages. Neither of these is strictly required for interoperability; they are performance enhance-

ment mechanisms.

Generated on Mon Jun 12 11:56:02 2006 for uIP 1.0 by Doxygen

协议的实现

IP - 互联网协议

IP分片重组

广播和多播

ICMP - Internet控制消息协议

剩余260页未读，继续阅读

AS1317253535

粉丝: 2
资源: 12

uIP1.0协议栈中文翻译：嵌入式TCP/IP详解

uip1.0完整源码+应用+uip1.0中文说明pdf

利用Protothread实现实时多任务系统

uip1.0的源代码

uip webserver 安装

UIP_LLH_LEN

uboot如何支持uip

UIP_IPUDPH_LEN

正点原子 uip client

uip udp 发送完成

modbus tcp uip

appeye_uip_warning

uip_arp是什么意思？

lwip和uip移植 lpc1788

modbus tcp uip enc28j60

stm32f103rbt6 dm9000cep uip telnet功能实现

编写一个shell函数，该函数接收一个UIP作为参数，并根据UID显示对应的用户名

*(unsigned int*)

嵌入式网络库C++ 有哪些

tcp/ip协议在嵌入式的应用

嵌入式C++ 网络库有哪些

最新资源

(unsigned int)