![](https://csdnimg.cn/release/download_crawler_static/87708523/bga.jpg)
© FocalTech Systems Co., Ltd.
Proprietary & Confidential
MAR. 09, 2016
Preliminary Version: 0.7
EVEN Repair OP on/off control. Normally pull high. (for Pin Control only)
RPEN_EVEN = "L", EVEN Repair OP disable.
RPEN_EVEN = "H", EVEN Repair OP enable. (Default)
Note: EVEN Repair OP be used only for Even source channels (SO[0], SO[2], SO[4]….)
Power supply for MTP circuit.
Float this pin for normal operation.
Source Driver Output Signals.
All outputs will be of unknown values under stand-by mode.
Internal link together between input side and output side.
Input range: AVDD ~ AGND.
Internal link together between input side and output side.
Input range: AVDD ~ AGND.
Internal link together between input side and output side.
Input range: AVDD ~ AGND.
Internal link together between input side and output side.
Input range: AVDD ~ AGND.
Internal link together between input side and output side.
Input range: AVDD ~ AGND.
Internal link together between input side and output side.
Input range: AVDD ~ AGND.
Internal link together between input side and output side.
Input range: AVDD ~ AGND.
Test pin for internal test use only. Float these pins for normal operation.
Test pin for internal test use only. Float these pins for normal operation.
IC Shielding pads.
Float these pins for normal operation.
IC Shielding pads.
Float these pins for normal operation.
IC Shielding pads.
Float these pins for normal operation.
Data Bus Shielding pad.
Those pins are internally connected to the GND.
RECOMMAND to add shielding lines on the FPC to reduce EMI.
NOTE:
I:Input ,O:Output, P:Power, D:Dummy, S:Pass line,M:mark,
T:Testing, SH:shielding, I/O:Input / Output, C:Capacitor pin, R:Reference point.