![](https://csdnimg.cn/release/download_crawler_static/12309436/bg4.jpg)
Multi-DUT/Multicom Connectivity Test System
4
RF Analyzer — Signal Trigger
Parameter Range
Absolute minimum value
Wideband RF -30 dBm
Video -40 dBm
Absolute maximum value Limited by the maximum input power
Trigger relative threshold 30 dB
Level accuracy < ± 1 dB
RF Generator
Parameter Ports Range
Output frequency range RF1 to RF4
860 to 1000 MHz
1770 to 2600 MHz
3300 to 3800 MHz
4900 to 6000 MHz
IF bandwidth RF1 to RF4 120 MHz
Output power range (CW) RF1 to RF4
1 port active:
+10 to -95 dBm (≤ 2600 MHz)
0 to -95 dBm (> 2600 MHz)
All ports active:
+5 to -95 dBm (≤ 2600 MHz)
-5 to -95 dBm (> 2600 MHz)
Output power accuracy
1
Specication: (20C to 30C): ± 0.75 dB ( 0 to -95 dBm)
Typical (20C to 30C): ± 0.50 dB ( 0 to -95 dBm)
Typical (>30C to 35C): < ± 1 dB (+20 to -75 dBm)
Quantization 16 bits
Output return loss RF1 to RF4
≤1000 MHz, >10 dB
>1000 MHz, >12 dB
Spurious (in channel) RF1 to RF4
Specication: ≤ -40 dBc or ≤ -95 dBm (80 MHz) (CW)
Typical: ≤ -50 dBc or ≤ -95 dBm (80 MHz) (CW)
Spurious (out of channel) RF1 to RF4
Out-of-band (>± 40 MHz
from carrier):
≤ -45 dBc (CW, excluding harmonics
distortions)
Spectral atness RF1 to RF4
Specication: ≤ ± 0.50 dB (± 40 MHz)
Typical: ± 0.25 dB (± 40 MHz)
Integrated phase noise
≤ 0.3 degrees (100 Hz to 1 MHz) (860 to 1000 MHz)
≤ 0.3 degrees (100 Hz to 1 MHz) (1770 to 2600 MHz)
≤ 0.4 degrees (100 Hz to 1 MHz) (3300 to 3800 MHz)
≤ 0.4 degrees (100 Hz to 1 MHz) (4900 to 6000 MHz)
0.2 degrees (100 Hz to 1 MHz) typical
1 Output power accuracy specification applies after a warm up period of 2 hours or more