ARM移植QT详细教程：同事成功案例与配置详解

tslib1.4交叉编译:

1.tar -zxvf tslib-1.4.tar.gz （/opt下）

2.进入tslib

3../autogen.sh

4.export CC=/usr/local/arm/arm-2007q3/bin/arm-none-linux-gnueabi-gcc
  export CXX=/usr/local/arm/arm-2007q3/bin/arm-none-linux-gnueabi-g++

5../configure     --prefix=/usr/local/tslib --host=arm-linuxac_cv_func_malloc_0_nonnull=yes --enable-inputapi=no 

注：若触摸屏支持ioctl操作：./configure时不用--enable-inputapi=no，
不支持则要添上，如果不添加无法运行程序，会有"ts_open:Inappropriate ioctol for device""tes_open:No such file"此类错误。

"No raw modules loaded."错误的话：
ts.conf去掉module_raw input

6.出现错误：undefined reference 'rpl_malloc'
解决：将config.h.in中的
 #undef malloc  行注释掉
 
7.make

8.make install//make install-strip
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/opt/tslib/tests'
make[1]: Leaving directory `/opt/tslib/tests'
make[1]: Entering directory `/opt/tslib'

make[2]: Entering directory `/opt/tslib'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/local/tslib/lib/pkgconfig" || mkdir -p -- "/usr/local/tslib/lib/pkgconfig"
 /usr/bin/install -c -m 644 'tslib-0.0.pc' '/usr/local/tslib/lib/pkgconfig/tslib-0.0.pc'
make[2]: Leaving directory `/opt/tslib'
make[1]: Leaving directory `/opt/tslib'


9.mount -t cifs -o username="administrator",passwd="linux" //192.168.0.3/RTU_share /mnt/Nand2

10.cd /mnt/Nand2/tslib1.4/lib

cp libts-0.0.so.0.1.1 libts-0.0.so.0
cp libts-0.0.so.0.1.1 ibts.sol



11.添加环境变量：
    export QTDIR=/mnt/Nand2/QtEmbedded-4.6.3-arm  
    export QPEDIR=/mnt/Nand2/QtEmbedded-4.6.3-arm
    export QT_ROOT=/mnt/Nand2/QtEmbedded-4.6.3-arm   
    export QT_PLUGIN_PATH=$QT_ROOT/plugins
    export QT_QWS_FONTDIR=$QT_ROOT/lib/fonts   
    export TSLIB_ROOT=/mnt/Nand2/tslib1.4  
    export TSLIB_CONSOLEDEVICE=none 
    export TSLIB_FBDEVICE=/dev/fb0  
    export TSLIB_TSDEVICE=/dev/input/event0  
    export TSLIB_PLUGINDIR=$TSLIB_ROOT/lib/ts  
    export TSLIB_CONFFILE=$TSLIB_ROOT/etc/ts.conf  
    export TSLIB_CALIBFILE=/etc/pointercal