Veritas NetBackup 5330 Appliance安装指南（第3版）

需积分: 5 153 浏览量更新于2024-06-22 收藏 4.84MB PDF 举报

本指南是Veritas NetBackup 5330 Appliance的硬件安装手册，适用于版本3.0。该文档详细介绍了如何对这款专为备份和数据保护设计的NetBackup 5330 Appliance进行物理安装和配置。作为Veritas Technologies LLC的注册商标产品，它提供了全面的指导，确保用户在遵循版权法律的前提下正确安装和操作。文档的核心知识点包括： 1. **产品概述**：NetBackup 5330 Appliance 是一个高度集成的解决方案，旨在提供高效、可靠的备份和恢复服务，适用于中大型企业环境。它可能包含第三方软件，这些软件可能分别受到开源或免费软件许可的约束。 2. **法律声明**：所有内容受2016年Veritas Technologies LLC的版权保护，强调了尊重知识产权的重要性。对于使用到的第三方程序，用户需要遵循Veritas提供的相应授权协议，如访问开源或免费软件的许可证协议。 3. **安装流程**：手册详细描述了硬件组件的安装步骤，包括但不限于服务器硬件的连接、电源管理、网络配置，以及安全设置。用户需遵守文档中关于复制、分发和反向工程（decompilation/reverse engineering）的限制。 4. **文档版本与更新**：此版本为3.0，表明文档可能包含针对新功能、改进和问题修复的更新，用户应确保使用最新版本以获取最佳支持。 5. **技术支持与资源**：指南还提供了相关的联系信息，以及指向Veritas官方网站的链接，以获取更多法律通知、许可证协议和其他技术支持资源。阅读并遵循NetBackup 5330 Appliance Hardware Installation Guide - 3.0，用户将能够顺利安装、配置和维护这款高效的备份设备，同时确保在法律框架内操作。

Caution: When you add a second Expansion Shelf to an operational appliance

system, best practices recommend that you turn off the compute node, the Primary

Shelf, and the existing Expansion Shelf.

Note: Before you add a second Expansion Shelf to your system, you must upgrade

to NetBackup Appliance Release 2.7.1, or later. Refer to the NetBackup Appliance

Upgrade Guide for Release 2.7.x - RedHat Enterprise Linux (RHEL) Operating

System, which is located at the following web site. NetBackup Appliance

documentation

Understanding the NetBackup 5330 hardware

installation sequence

For easier installation and cabling between units, the installation of the compute

node and the storage shelves must be performed in a specific sequence.

The recommended installation sequence is as follows:

■ Storage shelves

■ Expansion Storage Shelves - install in the lowest available 4RU rack spaces.

■ Primary Storage Shelf - install in the next available 4RU rack space above

the Expansion Storage Shelves.

The storage shelves are the heaviest units. They are physically similar and

both use the same rail type for mounting. For easier installation, do not install

the disk drives until after the units are installed into the rack.

The estimated time to install one storage shelf is about 2.5 hours.

■ NetBackup 5330 compute node - install in the next available 2RU rack space

above the Primary Storage Shelf.

The estimated time to install one compute node is about 1.25 hours.

Table 1-3 describes the installation steps and includes a link to the specific procedure

for that step.

Table 1-3

Storage shelf and compute node hardware installation sequence

DescriptionStep

Unpack the storage shelves.

See “Unpacking a Primary Shelf or an Expansion Shelf” on page 23.

15Hardware overview

Understanding the NetBackup 5330 hardware installation sequence

Table 1-3

Storage shelf and compute node hardware installation sequence

(continued)

DescriptionStep

Unpack the compute node.

See “Unpacking a NetBackup 5330 compute node” on page 25.

Determine the rack locations for the storage shelves and the compute node.

See “Determining rack locations for NetBackup 5330 hardware” on page 27.

Mount the storage shelf rails in the rack and install the storage shelves.

Install all Expansion shelves below the Primary Shelf.

The following topic can be used for both the Expansion Shelf and the Primary

Shelf.

See “Installing a Primary Shelf or an Expansion Shelf” on page 32.

Install the disk drives into each storage shelf. Be sure to install only 3TB or 6TB

disks into one shelf. You cannot put both types of disks into a single shelf.

See “Installing disk drives into a Primary Shelf or an Expansion Shelf ” on page 39.

Mount the compute node rails in the rack and install the compute node.

See “Installing the NetBackup 5330 compute node” on page 42.

Connect the four fiber channel cables between the Primary Storage Shelf and the

compute node.

See “Connecting a NetBackup 5330 compute node to a Primary Shelf” on page 47.

If you are installing one Expansion shelf to a Primary Shelf and a compute node:

Connect four SAS cables between the Expansion Shelf and the Primary Shelf.

See “Connecting one Expansion Shelf to a Primary Shelf” on page 49.

If you are adding a second Expansion Shelf to an existing Expansion Shelf, a

Primary Shelf, and a compute node: Connect two new SAS cables between the

two Expansion shelves. Then, disconnect one end of two SAS cables from the

existing Expansion Shelf and connect them to the new Expansion Shelf.

See “Connecting a second Expansion Shelf to an existing 3TB Expansion Shelf

and a 3TB Primary Shelf” on page 53.

Connect the Power Distribution Unit (PDU) cords between the compute node and

the power distribution outlets in the rack.

See “Connecting the power cords to the hardware” on page 64.

Hardware overview

Understanding the NetBackup 5330 hardware installation sequence

剩余87页未读，继续阅读

weixin_40191861_zj

粉丝: 84
资源: 1万+

Veritas NetBackup 5330 Appliance安装指南（第3版）

NetBackup 5330 Appliance Hardware Installation Guide.pdf

NetBackup 5330 Appliance Hardware Installation Guide - 272.pdf

NetBackup 5330 Hardware Installation Guide-2.7.1.pdf

Veritas NetBackup 5240 Appliance在2019年的更新中引入了哪些创新硬件特性以及产品功能改进？

Veritas NetBackup 5240 Appliance在2019年更新中有哪些新的硬件功能和产品特性？

nbcssc -s -a NetBackup -f -m mediaserver01进程是什么

Veritas NetBackup 5240一体机在企业级数据保护中扮演什么角色，2.7.3版本有哪些新特性？

Veritas NetBackup 5240一体机如何提升企业级数据保护的能力？2.7.3版本新特性具体包括哪些？

nbu windows

NetBackup 5240一体机在企业级数据保护中扮演什么角色，并介绍2.7.3版本新增功能的详细信息。

最新资源