STC5604AD单片机程序代码分享

#include "intrins.h"
#include "STC12C5410AD.h"

#define  uint8  unsigned char                    /* defined for unsigned 8-bits integer variable  无符号8位整型变量  */
#define int8  signed   char                     /* defined for signed 8-bits integer variable 有符号8位整型变量  */
#define  uint16  unsigned short                /* defined for unsigned 16-bits integer variable  无符号16位整型变量 */
#define   int16  signed   short               /* defined for signed 16-bits integer variable  有符号16位整型变量 */
#define    uint32   unsigned int             /* defined for unsigned 32-bits integer variable  无符号32位整型变量 */
#define    int32  signed   int              /* defined for signed 32-bits integer variable  有符号32位整型变量 */
#define    fp32  float                     /* single precision floating point variable (32bits) 单精度浮点数（32位长度） */
#define     fp64  double                  /* double precision floating point variable (64bits) 双精度浮点数（64位长度） */
uint8  ADC_Channel_2_Result_bak;
uint8  ADC_Power_On_Speed_Channel_2 =0xe2;   //P1.2作为A/D输入
uint8  ADC_Power_On_Speed_Channel_3 =0xe3;  //P1.3作为A/D输入
uint8  ADC_Power_On_Speed_Channel_4 =0xe4; //P1.4作为A/D输入
uint16 P11;
//电流与电压的十次计数变量
uint8 i_cnt;
uint8  p_cnt;

sbit  down=P3^7;         //PCA匹配输出
sbit  led=P2^1;

sbit   SCLK  =P1^7;    //时钟
sbit   MOSI  =P1^5;   //数据
uint16 SPI_buffer;
uint8 ms_cnt=0,sec_cnt=0,min_cnt=0,flag=1,min_cnt_0;
uint8 time10[4]={0x00,0x00,0x00,0x00}; //累时计数
uint16 addr=0;
uint8 disp_cnt;//数码管按位变化

//*****************************************
uint8 djcs_cnt;//电机初始启动半波计数

uint8 gy_flag=0,dy_flag=0; //高压标志

//******************************************
uint16 I1;
uint8  play[7]={0x00,0x00,0x00,0x00,0x00,0x00,0x00};
uint8  mss_cnt=0;
uint8  baojing_flag=0;//各个报警的标志(电机堵塞1，电机没油2，电流开路3，电流短路4，电机过流1)
uint8  key=0xff;
unsigned char ii=0;//定义个临时变量
uint8   zt_flag=1,sel_flag=0;
uint8   right_flag=0;  //密码正确标志
uint8  keyvalue=0x0f;
uint8  xiedu_flag=0; //写读标志
//uint16 t_total;
unsigned short xdata  tt1;
unsigned char xdata  tt;
unsigned short xdata  parameter[12]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};  //参数的存取
                            //1高压高位  2低位 3导通角 4预报警时间 5停机报警 6密码 7零位 8满度  9回差 10 I零位 11 I满位12 I回差
uint8  fourc[4]={0x00,0x00,0x00,0x00};//,0x00,0x00,0x00
//uint8  mima[3]={0x02,0x00,0x02};
uint16 temp1;                 //参数变量
unsigned short xdata  qt_flag=0;   //电机启动标志
                             
uint8 b,c,d;           //显示测量值的参数 

uint8 kailu,duanlu,ychi1,ychi;