![](https://csdnimg.cn/release/download_crawler_static/87671990/bg4.jpg)
6. Click Save.
7. Under Link to Geometry File on the left hand task bar click Browse. Select the provided
file and click Open.
8. Make sure that is highlighted and click New simulation from the left-hand taskbar.
Creating the Solid Material
1. When Simulation opens, expand Geometry in the project tree at the left hand side of the
Simulation window.
2. Select Solid, and in the Details view below, select Material.
3. Use the arrow that appears next to the material name Structural Steel to select New
Material.
4. When the Engineering Data window opens, right-click New Material from the tree view
and rename it to Plate.
5. Enter for Young's Modulus, for Poisson's Ratio and 2550 for Density.
Note that the other properties are not used for this simulation, and that the units for these
values are implied by the global units in Simulation.
6. Click the Simulation tab near the top of the Workbench window to return to the
simulation.
Basic Analysis Settings
The ANSYS Multi-field simulation is a transient mechanical analysis, with a timestep of s
and a time duration of 5 s.
1. Select New Analysis > Flexible Dynamic from the toolbar.