戴尔PowerEdge M1000e刀片式机箱用户手册

下载需积分: 3 | PDF格式 | 10.19MB | 更新于2024-07-16 | 118 浏览量 | 举报

"戴尔PowerEdge M1000e刀片式机箱用户手册" 戴尔PowerEdge M1000e是一款先进的刀片式服务器机箱，专为数据中心和企业级应用设计，提供高效、可扩展且易于管理的计算解决方案。这款机箱支持多种刀片式服务器、存储和网络模块，旨在优化空间利用、降低能耗并提高IT基础设施的灵活性。该用户手册是指导用户正确安装、配置和维护PowerEdge M1000e的关键文档。手册中的"Notes, Cautions, and Warnings"部分强调了在操作过程中需要注意的重要信息、潜在硬件损坏或数据丢失的风险以及如何避免这些问题的方法，以确保系统的安全运行。在安全警示方面，"Note" 提供了有助于更好地使用计算机的重要提示；"Caution" 警告用户可能对硬件造成的损害或数据丢失，并给出了预防措施；而"Warning" 则指出可能导致财产损失、人身伤害甚至死亡的严重风险，用户必须严格遵守操作指南以避免这些情况发生。手册详细涵盖了以下内容： 1. 产品介绍：包括PowerEdge M1000e的规格、设计特点和兼容的刀片服务器型号。 2. 安装与配置：指导用户如何安装服务器、电源、冷却系统和其他组件，以及如何设置网络和存储配置。 3. 系统管理：介绍使用戴尔OpenManage等工具进行远程监控和管理系统的方法，以实现自动化运维和故障排除。 4. 故障诊断与解决：提供了识别和处理常见问题的步骤，帮助用户快速定位并修复故障。 5. 维护与升级：包括定期维护程序、硬件更换过程以及如何进行系统扩展和升级。 6. 环境与合规性：讨论了机箱的能效、环保标准以及遵守的法规要求。此外，手册中还提到了戴尔公司的一些商标，如Dell、PowerEdge、OpenManage等，这些都是戴尔在IT领域的知名品牌，展示了其在服务器和数据中心解决方案方面的专业能力。同时，手册也列出了英特尔（Intel）、AMD等合作厂商的产品商标，表明了戴尔与这些领先技术供应商的合作关系，确保了产品采用最新、最先进的技术。 "Dell PowerEdge M1000e Blade Enclosure Owner's Manual"是一份全面的参考资料，对于拥有和操作这款刀片式服务器机箱的IT专业人员来说，是不可或缺的工具，可以帮助他们充分利用PowerEdge M1000e的优势，构建和管理高效、可靠的IT环境。

Fan Module Indicators

Figure 10. Fan Module Indicators

1. fan power indicator

2. fan fault indicator

The indicators provide the following information:

Indicator Description

Fan power indicator

Solid Green The fan is receiving DC power and working properly.

Off The fan has failed.

Fan fault indicator

Amber The fan is in a fault condition.

Module Indicator Description

Video connector Allows a monitor to be connected to the system.

ACI port Allows connection of one or more servers to a Dell console switch with an Analog Rack

Interface (ARI) port, such as an external digital or analog switch.

Link indicator

Off The ACI is not connected to the external switch.

Green The ACI is connected to the external switch.

Activity indicator

Off Data is not being sent or received.

Amber blinking Data is being sent or received.

Avocent Analog iKVM Switch Module Features

• Local iKVM access can be remotely disabled on a per blade basis, using the blade’s iDRAC interface (access is

enabled by default).

NOTE: A console session (enabled by default) to a given blade is available for both iDRAC interface and

iKVM users. Users connected to a blade's console using iDRAC and the iKVM see the same video and are

able to type commands. If not required, sharing can be disabled using the iDRAC console interface.

• One VGA connector. The iKVM supports a video display resolution range from 640 x 480 at 60 Hz up to 1280 x

1024 x 65,000 colors (non-interlaced) at 75 Hz.

• Two USB ports for keyboard and mouse.

NOTE: The iKVM USB ports do not support storage devices.

• RJ-45 Analog Console Interface (ACI) port for tiering with Dell and Avocent analog KVM and KVM over IP

switches with Analog Rack Interface (ARI) ports.

NOTE: Although the ACI port is an RJ-45 connector and uses Cat5 (or better) cabling, it is not an Ethernet

network interface port. It is only used for connection to external KVM switches with ARI ports, and does

not support native KVM over IP.

• The iKVM can also be accessed from the front of the enclosure, providing front or rear panel KVM functionality,

but not at the same time. For enhanced security, front panel access can be disabled using the CMC’s interface.

NOTE: Connecting a keyboard, video, and mouse to the enclosure front panel disables video output to the

iKVM back panel port. It does not interrupt iDRAC video and console redirection.

• You can use the iKVM to access the CMC console directly, using RACADM or using the web-based interface.

For more information, see Using the iKVM Module in the CMC User’s Guide at support.dell.com/manuals.

– Provides comprehensive enclosure inventory and status/error reporting.

• CMC fail-safe mode. For more information, see CMC Fail-Safe Mode.

• The CMC provides a mechanism for centralized configuration of the following:

– The enclosure’s network and security settings

– Power redundancy and power ceiling settings

– I/O switches and iDRAC network settings

– First boot device on the server blades

– Checks I/O fabric consistency between the I/O modules and blades and disables components if

necessary to protect the system hardware

– User access security

NOTE: It is recommended that you isolate chassis management from the data network. Dell cannot support

or guarantee uptime of a chassis that is improperly integrated into your environment. Due to the potential

of traffic on the data network, the management interfaces on the internal management network can be

saturated by traffic intended for servers. This results in CMC and iDRAC communication delays. These

delays may cause unpredictable chassis behavior, such as CMC displaying iDRAC as offline even when it

is up and running, which in turn causes other unwanted behavior. If physically isolating the management

network is impractical, the other option is to separate CMC and iDRAC traffic to a separate VLAN. The CMC

and individual iDRAC network interfaces can be configured to use a VLAN with the racadm setniccfg

command. For more information, see the

Dell Chassis Management Controller Administrator Reference

Guide

at support.dell.com/manuals.

CMC Fail-Safe Mode

Similar to the failover protection offered by the redundant CMC, the M1000e enclosure enables the fail-safe mode to

protect the blades and I/O modules from failures. The fail-safe mode is enabled when no CMC is in control of the

chassis. During the CMC failover period or during a single CMC management loss:

• you cannot turn on newly installed blades

• existing blades cannot be accessed remotely

• chassis cooling fans run at 100% for thermal protection of the components

• blade performance reduces to limit power consumption until management of the CMC is restored

The following are some of the conditions that can result in CMC management loss:

Condition Description

CMC removal Chassis management resumes after replacing CMC, or after failover to standby CMC.

CMC network cable

removal or network

connection loss

Chassis management resumes after the chassis fails over to the standby CMC. Network

failover is only enabled in redundant CMC mode.

CMC reset Chassis management resumes after the CMC reboots or chassis fails over to the standby CMC.

CMC failover

command issued

Chassis management resumes after the chassis fails over to the standby CMC.

CMC firmware update Chassis management resumes after the CMC reboots or chassis fails over to the standby CMC.

It is recommended that you update the standby CMC first so that there is only one failover

event. For more information on updating the CMC firmware, see the CMC User's Guide at

support.dell.com/manuals.

剩余102页未读，继续阅读

欲语与雨

粉丝: 32
资源: 43

戴尔PowerEdge M1000e刀片式机箱用户手册

DELL bladeServers m1000e 刀片服务器 _ visio 图标

NV8600显卡电路原理图

根德Grundig VS170主控芯片AN2510S原理图

请帮我搭建Dell 服务器产品谱系图

如何在vmware ESX环境中配置DELL FC SAN网络时，正确设置RAID级别并映射虚拟磁盘给ESX主机？

在奥科M1000B语音网关上设置IP地址和配置编码格式有哪些具体步骤？

在vmware ESX环境中部署DELL FC SAN网络时，如何优化RAID10配置并实现虚拟磁盘的主机映射，以及如何通过SANSwitch配置Zone以确保存储通信？

如何在奥科M1000B语音网关上配置网络接口和编码格式？需要考虑哪些注意事项？

如何在奥科M1000B语音网关上设置IP地址和配置编码格式？请提供详细步骤和注意事项。

三菱3U PLC，modbus rtu主站程序，用梯形图表示

最新资源