"TI-SN75LVPE801.pdf: SATA转接驱动器规格及连接方式"

The document "TI-SN75LVPE801.pdf" provides information on the SATA (Serial Advanced Technology Attachment) drive. The main IC (integrated circuit) of interest is the SN75LVPE801, which is designed to interface with a SATA host controller and a SATA device. The SN75LVPE801 has several pins that serve specific functions. Pins VCC1 and VCC are used to provide power to the IC, while the RX pins are used for receiving data from the SATA host controller. The EQ pins are used for equalizing the received data, and the GND pin is connected to the ground. The TX pins are used for transmitting data from the SATA device, and the DE pin is used for data enable. The document also mentions the use of capacitors in the circuit. Capacitors with values of 220nF and 330nF are used in the SN75LVPE801, while capacitors with values of 200nF and 470nF are used in the DE and VCC pins respectively. The SN75LVPE801 is designed to be used in a SATA system, which consists of a host controller and a device. The host controller is responsible for controlling the storage device, which can be a hard disk drive or a solid-state drive. The device connects to the host controller via a SATA connector. The document also includes copyright information, stating that it is the property of Texas Instruments Incorporated and was copyrighted in 2016. Additionally, the document provides a product folder and sample code that can be used with the SN75LVPE801. In conclusion, the "TI-SN75LVPE801.pdf" document provides detailed information about the SN75LVPE801 IC and its use in SATA drive systems. It explains the various pins and their functions, the use of capacitors in the circuit, and provides copyright and additional resources for further exploration.