"EIKI爱其EIP-1600T投影仪用户手册及品牌说明书"

版权申诉

19 浏览量更新于2024-04-20 收藏 3.22MB PDF 举报

EIKI is a renowned brand known for its high-quality projectors, with the EIP-1600T being a standout model. The EIP-1600T User Manual provides important information for users, including the importance of recording the Serial Number for reporting loss or theft. Additionally, the manual emphasizes the thorough checking of contents against the list of supplied accessories before recycling packaging. It is clear that EIKI prioritizes user assistance and satisfaction. The EIKI brand is committed to providing reliable and efficient projectors, as highlighted in the EIKI Brand Guide. The EIP-1600T, with its cutting-edge technology and superior performance, reflects the brand's dedication to excellence. EIKI Industrial Co., Ltd. is a trusted name in the industry, delivering top-notch products that meet the needs of consumers worldwide. Overall, the EIP-1600T Owner's Manual serves as a comprehensive guide for users, ensuring that they make the most of their projector. With detailed instructions and helpful tips, users can easily set up and operate their EIP-1600T. EIKI's commitment to customer satisfaction is evident in the attention to detail and user-friendly design of the manual. Whether you are a professional user or a casual consumer, the EIP-1600T is the perfect choice for all your projection needs.

Observe the following safeguards when setting up your

projector.

Caution concerning the lamp unit

■ Potential hazard of glass par-

ticles if lamp ruptures. In

case of lamp rupture, contact

your nearest EIKI Authorized

Dealer or Service Center for

replacement.

See “Replacing the Lamp” on

page 54.

Caution concerning the setup of the pro-

jector

■ For minimal servicing and to maintain high

image quality, EIKI recommends that this pro-

jector be installed in an area free from hu-

midity, dust and cigarette smoke. When the

projector is subjected to these environments,

the vents and lens must be cleaned more of-

ten. As long as the projector is regularly

cleaned, use in these environments will not

reduce the overall operation life of the unit.

Internal cleaning should only be performed

by an EIKI Authorized Dealer or Service Cen-

ter.

Do not set up the projector in places ex-

posed to direct sunlight or bright light.

■ Position the screen so that it is not in direct

sunlight or room light. Light falling directly on

the screen washes out the colors, making

viewing difficult. Close the curtains and dim

the lights when setting up the screen in a

sunny or bright room.

Caution regarding placing of the projec-

tor

■ Place the projector on a level site within the

adjustment range (8 degrees) of the adjust-

ment foot.

■ After the projector is purchased, a faint smell

from the vent may appear when the power is

first turned on. This is normal and is not a

malfunction. It will disappear after the projec-

tor is used for a while.

When using the projector in high-altitude

areas such as mountains (at altitudes of

approximately 4,900 feet (1,500 meters)

or more)

■ When you use the projector in high-altitude

areas with thin air, set “Fan Mode” to “High”.

Neglecting this can affect the longevity of the

optical system.

Warning about placing the projector in

a high position

■ When placing the projector in a high position,

ensure that it is secured carefully to avoid per-

sonal injury caused by the projector falling

down.

Do not subject the projector to hard im-

pact and/or vibration.

■ Protect the lens so as not to hit or damage

the surface of the lens.

Rest your eyes occasionally.

■ Continuously watching the screen for long

hours will cause eye strain. Be sure to occa-

sionally rest your eyes.

Avoid locations with extremes of tem-

perature.

■ The operating temperature of the projector is

from 41°F to 95°F (+5°C to +35°C).

■ The storage temperature of the projector is

from –4°F to 140°F (–20°C to +60°C).

Do not block the exhaust and intake

vents.

■ Allow at least 11

/16 inches (30 cm) of space

between the exhaust vent and the nearest

wall or obstruction.

■ Be sure that the intake vent and the exhaust

vent are not obstructed.

■ If the cooling fan becomes obstructed, a pro-

tection circuit will automatically put the pro-

jector into standby mode to prevent overheat

damage. This does not indicate a malfunc-

tion. (See pages 52 and 53.) Remove the pro-

jector power cord from the wall outlet and wait

at least 10 minutes. Place the projector where

the intake and exhaust vents are not blocked,

plug the power cord back in and turn on the

projector. This will return the projector to the

normal operating condition.

■ When turning off the projector, the cooling fan

runs to decrease the internal temperature for

a while. Unplug the power cord after the cool-

ing fan stops. The period the cooling fan runs

will vary, depending on the circumstances and

the internal temperature.

Caution regarding usage of the projector

■ When using the projector, be sure not to sub-

ject it to hard impact and/or vibration, as this

can result in damage. Take extra care with

the lens. Before moving the projector, be sure

to unplug the power cord from the wall outlet,

and disconnect any other cables connected

to it.

■ Do not carry the projector by holding the lens.

■ When storing the projector, re-attach the lens

cap. (See page 11).

■ Do not expose the projector to direct sunlight

or place next to heat sources. Doing so may

affect the cabinet color or cause deformation

of the plastic cover.

Other connected equipment

■ When connecting a computer or other audio-

visual equipment to the projector, make the

connections AFTER unplugging the power

cord of the projector from the AC outlet and

turning off the equipment to be connected.

■ Please read the owner’s manuals of the pro-

jector and the equipment to be connected for

instructions on how to make the connections.

Info

• The cooling fan regulates the internal tem-

perature, and its performance is automatically

controlled. The sound of the fan may change

during projector operation due to changes in

the fan speed. This does not indicate malfunc-

tion.

• Do not unplug the power cord during projec-

tion or cooling fan operation. This can cause

damage due to rise in internal temperature,

as the cooling fan also stops.

Using the projector in other countries

■ The power supply voltage and the shape of

the plug may vary depending on the region

or country you are using the projector in.

When using the projector overseas, be sure

to use an appropriate power cord for the coun-

try you are in.

Temperature monitor function

■

If the projector starts to overheat due to setup

problems or blockage of the air vents, “ ” and

“

” will illuminate in the lower left corner

of the picture. If the temperature continues to

rise, the lamp will turn off, the temperature warn-

ing indicator on the projector will blink, and after

a 90-second cooling-off period the projector will

enter standby mode. Refer to “Maintenance In-

dicators” on page 52 for details.

剩余68页未读，继续阅读

qingguo1979

粉丝: 36
资源: 7295

"EIKI爱其EIP-1600T投影仪用户手册及品牌说明书"

EIKI爱其EIP-WX5000 设置手册.pdf

EIKI爱其EIP-XSP2500 用户手册.pdf

EIKI爱其EIP-4500 设置手册.pdf

EIKI EIP-WX5000投影仪如何通过RS-232C进行设备控制，并设置相关的通信参数？

如何通过EIKI EIP-WX5000投影仪的LAN端口实现网络控制和远程监控？

在EIKI EIP-WX5000投影仪上，如何配置网络连接以实现在局域网内进行远程控制和监控投影仪状态？

EIKI爱其EIP-SXG20 用户手册.pdf

EIKI爱其EIP-HDT30 网络设置手册.pdf

EIKI爱其EIP-HDT30 用户手册.pdf

EIKI爱其EIP-XHS100用户手册.pdf

最新资源