SATA CX400打印机编程指南

需积分: 1 143 浏览量更新于2024-07-28 收藏 777KB PDF 举报

"SATA CX400 Programming Reference" 这篇文档主要介绍了SATA CX400在桌面打印机编程方面的参考资料，适用于需要对SATA CX400进行编程操作的IT专业人士。SATA CX400是一款可能应用于桌面环境的打印机设备，具备Serial ATA (SATA)接口，这是一种高速数据传输接口，常用于硬盘驱动器和其他存储设备。 SATA（串行ATA）技术是计算机硬件系统中的一个重要组成部分，它取代了早期的并行ATA（PATA）标准，提供了更高的数据传输速率和更低的电缆尺寸。CX400作为一款支持SATA的设备，意味着它能够利用这一接口的优势，提供快速、高效的数据交换能力。该编程参考可能包含以下内容： 1. **硬件接口规范**：详细说明SATA CX400的物理连接，包括插头、插座规格，以及信号线的定义。 2. **协议详解**：解释SATA通信协议，包括命令集、握手过程、错误处理机制等。 3. **固件编程**：提供关于如何更新或修改CX400打印机的固件的指南，这可能涉及到低级别编程语言和特定的编程工具。 4. **驱动程序开发**：阐述与CX400配合使用的驱动程序开发，包括API接口、驱动安装和配置等。 5. **故障排查**：提供常见问题和解决方案，帮助用户和开发者诊断和修复与SATA CX400相关的软件或硬件问题。 6. **性能优化**：指导如何最大化利用SATA CX400的性能，例如数据传输速率的提升和系统的整体响应速度。 7. **兼容性信息**：列出SATA CX400与其他硬件或软件组件的兼容性情况，如操作系统、主板、其他存储设备等。值得注意的是，这份文档可能只对授权的用户开放，且内容受到版权保护，未经SATO America, Inc.的许可，不得复制或分发给第三方。文档中的信息可能随时更改，使用者需自行承担可能出现的错误带来的风险。SATO Group of Companies在全球范围内有多个分支机构，提供的联系信息方便用户获取支持和服务。 SATA CX400编程参考对于那些需要进行桌面打印解决方案集成或定制的开发者来说，是至关重要的资源，可以帮助他们理解和利用SATA CX400的全部功能，从而提高工作效率和系统的整体性能。

Section1. Programming Concepts

Page 1-10 PN 9001106 Rev. A SATO

CX400

LABEL SENSING

The CX400 printers can use an eye-mark (black bar) label gap or label notch sensing. The gap

and notch sensor is a transmissive or see-thru type with an infrared light source directed

through the label from above and detected by a separate receiving sensor underneath the label

liner or tag. A reflective sensor is used to detect eye-marks printed on the bottom of the label

liner or tag. The eye-mark must not reflect more than 12% of the light. Since the same

receiving sensor is used for all three types of sensing, it must be calibrated with the media that

will be used. For thermal transfer printing, the ribbon must be installed while the calibration is

performed.

When calibrating the printer sensors, the gap or eye-mark sensor type must be selected first

using the <ESC>CI command and then the Direct Thermal or Thermal Transfer print mode

must be specified with an <ESC>CP command. These two commands are followed by an

<ESC>CA Calibrate command to instruct the printer to perform the calibration procedure. The

resulting calibration values are stored in the printer and used until the unit is recalibrated. A

separated value is stored for direct thermal or thermal transfer modes because the settings will

differ significantly because of the inclusion of the ribbon for thermal transfer. For example,

the following command string will calibrate the printer in the thermal transfer mode for gap

sensing:

<ESC>A<ESC>CP1<ESC>CI2<ESC>CA<ESC>Z

SATO CX400 PN 9001106 Rev. A Page 2-1

SECTION 2.

COMMAND CODES

This section contains the basic Command Codes for the SATO CX400 printers. Commands

for the oprions and specialized functions are provided in the following sections. Commands

must be sent to the printer in an organized fashion in order for the label(s) to print.

The purpose of this section is to:

• Explain the different commands and provide examples of their usage.

• To provide a detailed reference for programming the printers.

Each command begins on a separate page with its own heading. A uniform layout is used to

help you find key information about each command. For each Command Code in this section,

there will be a sample data input stream to the printer and the expected print output. By

studying the examples, you can learn how to use the particular command within a whole block

of printer code. Pay particular attention to the “Special Notes” with each command to learn

other important information.

The subject commands are highlighted in bold letters in the Reference Sheets. There are two

parts of most, but not all, commands. The first is the command character which immediately

follows the <ESC> code. It is always an upper case alpha or a special character (such as an

“&” or a “%”). It is never a lower case alpha character. If the command requires additional

variable information, it is represented by a group of lower case alpha characters immediately

following the command character. For example, if an aaaabb is listed following the basic

command, the printer will look for six characters immediately following the command. The

first four would represent the value of aaaa and the next two the value of bb.

The maximum number of characters defined in a parameter is represented by the number of

characters shown in the command structure. For example, a command followed by an aaaa

can have up to four characters. In general, commands with only one parameter following the

command can be entered without the leading zeroes. However, certain commands require the

exact number of matching characters. A command with two parameters listed following the

command code without a comma delimiter, such as aaaabbbb require the exact number of

digits to be entered. If the value of aaaa is “800” and the value of bbbb is “300”, then the

parameters must be entered as “08000300”. It is recommended that you make it a practice to

always enter leading zeros to prevent any mistakes.

NOTE: These examples assume the use of the Standard Protocol

Command Codes, a parallel interface and a 4 inch wide label in a CX400

printer.

An alphabetical listing of the command codes is contained in Appendix A:Command Code

Quick Reference.

剩余101页未读，继续阅读

lmwu2002

粉丝: 0
资源: 9

SATA CX400打印机编程指南

EMC CX400 重灌镜像

EMCCX400重灌镜像.pdf

SATO 7.0 中文打印机驱动

戴尔为比亚迪提供四大系统数据整合管理方案

EMC Clariion CX 系列客户日常维护指南

sato打印动态库（支持中文）

EMC助内蒙电力信息化

emc flare software release notes

emc日常管理维护和故障排除手册.pdf

cairo-devel-1.15.12-4.el7.x86_64.rpm.zip

最新资源