欧盟CE新标准EN 300328 v1.8.1：2.4GHz ISM带宽数据传输设备

需积分: 50 145 浏览量更新于2024-07-23 收藏 1.02MB PDF 举报

"欧盟新版标准EN 300328 v1080是针对2014年10月起实施的CE认证中关于信息类设备的标准，特别是涉及2.4GHz ISM频段的宽频传输系统。这个标准主要关注电磁兼容性和无线电频谱事务（ERM），确保设备在无线数据传输时符合欧盟的基本要求。" EN 300328是欧洲电信标准协会（ETSI）制定的一项和谐欧洲标准，它涵盖了《无线电和电信终端设备指令》（R&TTE Directive）第3.2条中的基本要求。该标准的版本EN 300328 V1.8.1（2012-06）是一个关键参考，用于指导2.4GHz工业、科学和医疗（ISM）频带内的宽频调制技术数据传输设备的设计、生产和测试。ISM频带被广泛用于无线局域网（LAN）、移动通信以及无需许可的短距离设备（SRD）。标准EN 300328的主要关注点包括： 1. **电磁兼容性（EMC）**：确保设备在运行时不会对其他电子设备产生干扰，同时也能抵抗外部电磁干扰。 2. **无线电频谱管理**：规定了设备在2.4GHz频段的操作规范，以防止频谱拥挤和冲突。 3. **宽频调制技术**：定义了允许的数据传输速率和调制方式，以支持高效和可靠的无线通信。 4. **安全与监管**：确保设备符合欧盟的法规要求，以保护用户和公众的安全。 5. **测试方法**：提供了一套标准测试程序，以验证设备是否满足EN 300328的规定。 6. **频谱效率**：鼓励使用技术来优化频谱使用，减少不必要的信号干扰。标准的实施对于制造商来说意味着他们必须确保其产品在设计和制造阶段就满足这些规定，以便通过CE认证并能在欧盟市场上销售。这通常涉及到在产品开发过程中进行电磁兼容性测试、无线电频谱合规性评估以及性能验证。此外，标准的更新（如v1080）可能包含对先前版本的改进，比如增加了新的技术要求、提升了安全标准或适应了新的市场和技术发展。制造商和工程师应持续关注EN 300328的最新版本，以确保其产品始终保持合规性。为了获取最新的标准文档，可以访问ETSI的官方网站（http://www.etsi.org）。在不同版本之间存在任何差异的情况下，PDF格式的文档被认为是参考版本，且在出现争议时将以此为准。

ETSI

ETSI EN 300 328 V1.8.1 (2012

06)

OATS Open Air Test Site

OFDM Orthogonal Frequency Division Multiplexing

OOB Out Of Band

RBW Resolution BandWidth

RMS Root Mean Square

R&TTE Radio and Telecommunications Terminal Equipment

RF Radio Frequency

SAR Semi Anechoic Room

TL Threshold Level

Tx Transmitter

UUT Unit Under Test

VBW Video BandWidth

4 Technical specifications

4.1 Environmental profile

The technical requirements of the present document apply under the environmental profile for operation of the

equipment, which shall be stated by the supplier.

The equipment shall comply with all the technical requirements of the present document at all times when operating

within the boundary limits of the required operational environmental profile.

4.2 Equipment types

4.2.1 Modulation types

The present document defines two categories of Wide Band Data Transmission equipment:

• Equipment using Frequency Hopping Spread Spectrum (FHSS) modulation.

• Equipment using other types of wide band modulation (e.g. DSSS, OFDM, etc.).

All forms of wide band modulations, other than FHSS, are treated identically with regard to the requirements of the

present document.

The supplier shall declare which modulation type(s) applies to the equipment. See also clause 5.3.1.

4.2.2 Adaptive and non-adaptive equipment

The present document covers both adaptive and non-adaptive equipment.

Adaptive equipment uses an automatic mechanism which allows the equipment to adapt automatically to its

environment by identifying frequencies that are being used by other equipment.

Non-adaptive equipment does not use such an automatic mechanism and hence are subject to certain restrictions with

respect to using the medium (see clauses 4.3.1.5 and 4.3.2.4 for Medium Utilisation factor) in order to ensure sharing

with other equipment.

Adaptive equipment may have more than one adaptive mode implemented.

Adaptive equipment is allowed to operate in a non-adaptive mode.

The equipment shall comply with the corresponding requirements in each of the modes in which it can operate.

The supplier shall declare whether the equipment is adaptive equipment or non-adaptive equipment. In case of adaptive

equipment, the supplier shall declare if more than one adaptive mode is implemented and whether the equipment can

also operate in a non-adaptive mode. See also clause 5.3.1.

ETSI

ETSI EN 300 328 V1.8.1 (2012

06)

4.3 Technical requirements

4.3.1 Technical requirements for Frequency Hopping equipment

Equipment using FHSS modulation, and further referred to as Frequency Hopping equipment, shall comply with the

requirements in clauses 4.3.1.1 to 4.3.1.11.

For equipment using other forms of modulation, the requirements in clause 4.3.2 shall apply.

4.3.1.1 RF output power

This requirement applies to all types of Frequency Hopping equipment.

4.3.1.1.1 Definition

The RF output power is defined as the mean equivalent isotropically radiated power (e.i.r.p.) of the equipment during a

transmission burst.

4.3.1.1.2 Limit

The maximum RF output power for adaptive Frequency Hopping equipment shall be equal to or less than 20 dBm.

The maximum RF output power for non-adaptive Frequency Hopping equipment, shall be declared by the supplier. See

clause 5.3.1 m). The maximum RF output power for this equipment shall be equal to or less than the value declared by

the supplier. This declared value shall be equal to or less than 20 dBm.

This limit shall apply for any combination of power level and intended antenna assembly.

4.3.1.1.3 Conformance

The conformance tests for this requirement are (part of the procedure) defined in clause 5.3.2.

4.3.1.2 Duty Cycle, Tx-sequence, Tx-gap

These requirements apply to non-adaptive frequency hopping equipment or to adaptive frequency hopping equipment

operating in a non-adaptive mode.

These requirements do not apply for equipment with a maximum declared RF Output power of less than 10 dBm e.i.r.p.

or for equipment when operating in a mode where the RF Output power is less than 10 dBm e.i.r.p.

Medical devices requiring reverse compatibility with other medical devices placed on the market when earlier versions

of the present document were harmonised, are allowed to have an operating mode in which they do not have to comply

with the requirements for Duty Cycle, Tx-sequence and Tx-gap.

4.3.1.2.1 Definition

Duty Cycle is defined as the ratio of the total transmitter 'on'-time to an observation period. The observation period is

equal to the average dwell time multiplied by 100 or by 2 times the number of hopping frequencies (N) whichever is the

greater.

Tx-sequence is defined as a period in time during which a single or multiple transmissions may occur and which shall

be followed by a Tx-gap. These multiple transmissions within a single Tx-sequence may take place on the same

hopping frequency or on multiple hopping frequencies.

Tx-gap is defined as a period in time during which no transmissions occur.

NOTE: For non-adaptive frequency hopping equipment, the maximum Duty Cycle at which the equipment can

operate, is declared by the supplier. The equipment may have a dynamic behaviour with regard to duty

cycle and corresponding power level. See clause 5.3.1 e).

ETSI

ETSI EN 300 328 V1.8.1 (2012

06)

4.3.1.2.2 Limit

For non-adaptive FHSS equipment, the Duty Cycle shall be equal to or less than the maximum value declared by the

supplier. In addition, the maximum Tx-sequence time shall be 5 ms while the minimum Tx-gap time shall be 5 ms.

4.3.1.2.3 Conformance

The conformance tests for this requirement are (part of the procedure) defined in clause 5.3.2.

4.3.1.3 Dwell time, Minimum Frequency Occupation and Hopping Sequence

These requirements apply to all types of frequency hopping equipment.

4.3.1.3.1 Definition

The Dwell Time is the time that a particular hopping frequency would be occupied by the transmitter during a single

hop. The equipment itself is not required to transmit on this hopping frequency during the Dwell Time.

The Minimum Frequency Occupation Time is the minimum time each hopping frequency shall be occupied within a

given period.

The Hopping Sequence of a Frequency Hopping system is the unrepeated pattern of the hopping frequencies used by

the equipment.

4.3.1.3.2 Limit

4.3.1.3.2.1 Non-adaptive frequency hopping systems

The accumulated Dwell Time on any hopping frequency shall not be greater than 15 ms within any period of 15 ms

multiplied by the minimum number of hopping frequencies (N) that have to be used. Non-adaptive medical devices

requiring reverse compatibility with other medical devices placed on the market when earlier versions of the present

document were harmonised, are allowed to have an operating mode in which the maximum dwell time is 400 ms.

The hopping sequence(s) shall contain at least N hopping frequencies where N is 15 or 15 divided by the minimum

Hopping Frequency Separation in MHz, whichever is the greater.

The Minimum Frequency Occupation Time shall be equal to one dwell time within a period not exceeding four times

the product of the dwell time per hop and the number of hopping frequencies in use.

4.3.1.3.2.2 Adaptive frequency hopping systems

Adaptive Frequency Hopping systems shall be capable of operating over a minimum of 70 % of the band specified in

clause 1.

The maximum accumulated dwell time on any hopping frequency shall be 400 ms within any period of 400 ms

multiplied by the minimum number of hopping frequencies (N) that have to be used.

The hopping sequence(s) shall contain at least N hopping frequencies at all times, where N is 15 or 15 divided by the

minimum Hopping Frequency Separation in MHz, whichever is the greater.

The Minimum Frequency Occupation Time shall be equal to one dwell time within a period not exceeding four times

the product of the dwell time per hop and the number of hopping frequencies in use.

4.3.1.3.3 Other Requirements

Frequency Hopping equipment shall transmit on a minimum of two hopping frequencies.

For non-Adaptive Frequency Hopping equipment, when not transmitting on a hopping frequency, the equipment has to

occupy that frequency for the duration of the typical dwell time.

For Adaptive Frequency Hopping systems using LBT based DAA, if a signal is detected during the CCA, these systems

may jump immediately to the next frequency in the hopping sequence (see clause 4.3.1.6.1.2 point 2) provided the limit

for maximum dwell is respected.

ETSI

ETSI EN 300 328 V1.8.1 (2012

06)

4.3.1.3.4 Conformance

The conformance tests for this requirement are defined in clause 5.3.4.

4.3.1.4 Hopping Frequency Separation

This requirement applies to all types of frequency hopping equipment.

4.3.1.4.1 Definition

The Hopping Frequency Separation is the frequency separation between 2 adjacent hopping frequencies.

4.3.1.4.2 Limit

4.3.1.4.2.1 Non-adaptive frequency hopping systems

The minimum Hopping Frequency Separation shall be equal to Occupied Channel Bandwidth (see clause 4.3.1.7) of a

single hop, with a minimum separation of 100 kHz.

4.3.1.4.2.2 Adaptive frequency hopping systems

The minimum Hopping Frequency Separation shall be 100 kHz.

4.3.1.4.3 Conformance

The conformance tests for this requirement are defined in clause 5.3.5.

4.3.1.5 Medium Utilisation (MU) factor

This requirement does not apply to adaptive equipment unless operating in a non-adaptive mode.

In addition, this requirement does not apply for equipment with a maximum declared RF Output power level of less

than 10 dBm e.i.r.p. or for equipment when operating in a mode where the RF Output power is less than 10 dBm e.i.r.p.

Medical devices requiring reverse compatibility with other medical devices placed on the market when earlier versions

of the present document were harmonised, are allowed to have an operating mode in which they have a Medium

Utilisation above the limit defined in clause 4.3.1.5.2.

4.3.1.5.1 Definition

The Medium Utilisation (MU) factor is a measure to quantify the amount of resources (Power and Time) used by

non-adaptive equipment. The Medium Utilisation factor is defined by the formula:

MU = (P/100 mW) × DC

where: MU is Medium Utilisation factor in %.

P is the RF output power as defined in clause 4.3.1.1.1 expressed in mW.

DC is the Duty Cycle as defined in clause 4.3.1.2.1 expressed in %.

NOTE: The equipment may have dynamic behaviour with regard to duty cycle and corresponding power level.

See clause 5.3.1 e).

4.3.1.5.2 Limit

The maximum Medium Utilisation factor for non-adaptive Frequency Hopping equipment shall be 10 %.

4.3.1.5.3 Conformance

The conformance tests for this requirement are (part of the procedure) defined in clause 5.3.2.

剩余83页未读，继续阅读

vinchwu

粉丝: 0
资源: 1

欧盟CE新标准EN 300328 v1.8.1：2.4GHz ISM带宽数据传输设备

XPlay素材之v1080.mp3

XPlay素材之v1080.mp4

XPlay素材之v1080.pcm

基于 .NET 5 + Ant Design Vue 的 Admin Fx.zip

基于java的KTV点歌系统设计新版源码+数据库+说明.zip

【java毕业设计】学生心理咨询评估系统源码（springboot+vue+mysql+说明文档+LW）.zip

python豆瓣电影数据爬虫+可视化分析项目源码+部署说明（高分项目）

基于java_springboot的房产销售系统毕业设计与实现(代码+数据库+论文+PPT+演示录像+运行教学+软件下载)

锂电池隔膜行业研究报告 新能源材料技术 锂电池隔膜 性能要求及市场分析

柔性PI膜行业研究报告 材料科学 聚酰亚胺 柔性应用 市场分析

最新资源

锂电池隔膜行业研究报告新能源材料技术锂电池隔膜性能要求及市场分析

柔性PI膜行业研究报告材料科学聚酰亚胺柔性应用市场分析