MAX96706/MAX96708汽车摄像头解串器评估套件

需积分: 10 95 浏览量更新于2024-07-15 收藏 6.61MB PDF 举报

"MAX96706/MAX96708评估套件用于测试这两款高带宽Gigabit多媒体串行链路(GMSL)解串器，它们具有自适应均衡和全双工控制通道功能。该套件支持通过标准FAKRA同轴或STP电缆进行评估，并配备了兼容Windows Vista和Windows 7的软件GUI，用于设备特性的测试。套件预装了MAX96706GTJ+或MAX96708GTJ+ IC。为了完整的GMSL评估，还需要搭配一个串行器板（如MAX96705或MAX96711评估套件）以及在使用STP电缆时所需的MAXCOAX2STP-HSD适配器套件。" MAX96706是专为汽车摄像头应用设计的一款紧凑型解串器，它具有自适应均衡功能和输出交叉点开关。内置的控制通道可在9.6kbps至1Mbps的速度下工作，支持UART、I2C和混合UART/I2C模式，允许独立于视频定时编程串行器、解串器(SerDes)和摄像头寄存器。解串器能够跟踪来自扩频串行输入的数据，其串行输入满足ISO 10605和IEC 61000-4-2 ESD标准。核心电源范围为1.7V到1.9V，I/O电源范围为1.7V到3.6V。评估套件提供了一种验证MAX96706和MAX96708性能的解决方案，包括了一个简单的图形用户界面，用户可以通过这个界面轻松操作设备的各种特性。该套件包含一块安装了MAX96706GTJ+或MAX96708GTJ+ IC的电路板。为了进行全面的GMSL评估，用户需要同时购买一个与之配套的串行器板，例如MAX96705或MAX96711评估套件，以便通过标准FAKRA同轴电缆进行连接。此外，当测试环境需要使用屏蔽双绞线(STP)电缆时，用户还需要购买MAXCOAX2STP-HSD适配器套件。请注意，每个链接只需一个适配器套件，用于连接串行器和解串器板。 MAX96706和MAX96708解串器是GMSL技术的重要组成部分，它们在汽车电子系统中扮演着关键角色，特别是在摄像头传输高清视频信号时，能够提供高速、低噪声和长距离的数据传输。这些特性对于保证车载摄像头系统的可靠性和性能至关重要。通过使用这些评估套件，开发者可以快速评估和优化设计方案，确保其符合汽车行业对数据传输速度、抗干扰能力和电磁兼容性的严格要求。

Maxim Integrated

│

www.maximintegrated.com

Evaluates: MAX96706/MAX96708

with Coax or STP Cable

MAX96706/MAX96708 Evaluation Kit

Controller Group Box

In the Controller group box, select Coax or STP from

the Link Type drop-down list, I2C or UART from the Bus

drop-down list, and whether the Serializer or Deserializer

should be connected to the USB controller. Upon

changing any of these parameters, conflicting jumper

settings will be highlighted, guiding the user to check

and make the corresponding changes on the evaluation

boards. Only Link Type and Device Address selections

on the Configuration Settings window affect EV kit

operation. Other items, including jumper selections, are

for user reference only.

Figure 3. MAXSerDesEV-N EV Kit Software: Warning! Nuvoton µController is not Detected.

Figure 4. MAXSerDesEV-N EV Kit Software: Warning! Microcontroller Firmware is Not the Latest Version

Maxim Integrated

│

www.maximintegrated.com

Evaluates: MAX96706/MAX96708

with Coax or STP Cable

MAX96706/MAX96708 Evaluation Kit

Serializer and Deserializer Jumper Selection

Blocks

The Serializer and Deserializer Jumper Selection

blocks list jumpers on the evaluation boards of the

selected Device ID and displays the correct shunt

positions based on the conditions selected in the

Controller blocks.

Identify Devices Button

The Identify Devices buttons causes the GUI to scan

the system and hunt for slave addresses on the bus.

Upon successful communication, it reads the Device ID

jumper lists on the Serializer and Deserializer Jumper

Selection blocks. It is also possible to select a device

from the Device ID drop-down list and manually change

the slave address in the Device Address edit box. It is a

good practice to utilize the Identify Devices button and

verify communication with the DUTs before attempting to

Connect.

Figure 15 and Figure 16 show jumper settings on the

serializer and deserializer PCBs for coax cable and I

communication with the USB controller connected to the

deserializer board. Refer to the respective IC data sheets

for detailed configuration information. See Table 1 for

PCB jumper descriptions.

Connect Button

The Connect button opens the Evaluation Kit window.

The GUI reads the serializer and deserializer registers

and updates the register maps for both. Successful

indicators. In case of a communication problem, the LED

indicators turn red.

Cancel - Do Not Connect Button

The Cancel - Do not Connect button opens the

Evaluation Kit window without attempting to connect to

the on-board microcontroller. Although there will be no

communication with the microcontroller, all functions and

tabs corresponding to the selected Device IDs become

active once there.

Evaluation Kit Window

The Evaluation Kit window shown in Figure 5 provides

access to all internal registers and functions of the

DUTs by means of reading and writing registers through

different tabs to allow the user to evaluate various

functions of the serializer and deserializer.

The Read All button updates the serializer and deserial-

izer register maps by reading the DUTs’ internal registers.

The Serializer group box provides pushbuttons to update

the serializer’s register maps. The Read All button reads

displayed register values. The Load button reads and

updates registers from a previously saved register map.

The Save button saves the existing register values into a

new file.

The Deserializer group box provides pushbuttons to

update the deserializer’s registers. The Read All button

reads register contents from the deserializer and updates

the displayed register values. The Load button reads and

updates registers from a previously saved register map.

The Save button saves the existing register values into a

new file.

The Wake Up button applies the register write sequence

described in the IC data sheets to wake up the DUTs from

sleep mode.

The Open Configuration button returns to the

Configuration Settings window. Use Open

Configuration and Connect buttons to go back and

forth between Configuration Settlings window and

Evaluation Kit window.

剩余37页未读，继续阅读

风铃叮咚

粉丝: 2
资源: 19

MAX96706/MAX96708汽车摄像头解串器评估套件

MAX9288COAXEVKIT-MAX9290COAXEVKIT.pdf

MAX96706.pdf

MAX96706.rar DATASHEET

MAX96705COAXEVKIT-MAX96711COAXEVKIT.pdf

硬件指标VMware-vsp_41_config_max-PG-CN.pdf

MAX25610A-MAX25610B.pdf

MAX13487EESA-datasheet.pdf

橱柜-max2009-a4-55.max

MAX3483-MAX3491.pdf

MAX9288-MAX9290.pdf

最新资源