IEC 62386-102:2014版通用控制设备要求

5星 · 超过95%的资源需积分: 35 198 浏览量更新于2024-07-18 1 收藏 4.63MB PDF 举报

IEC 62386-102-2014是国际电工委员会制定的一项关于数字可寻址照明接口（DALI）的系列标准之一，专注于控制装备的通用要求。该标准在2014年修订至第二版，与IEC 62386-101:2014（基本系统组件要求）以及IEC 62386-2xx系列（针对灯具的特定扩展）和IEC 62386-103:2014（针对控制设备的特定要求）共同发布，目的是为了确保兼容性和便于未来的修改和更新。该标准的主要内容包括对控制装备的通用规定，涵盖了诸如设备设计、功能、通信协议、安全性能和互操作性等方面的要求。它旨在促进照明系统的高效、可靠运行，并确保不同制造商的产品能够在统一的标准框架内工作。第二版的发布旨在解决与旧版IEC 62386第1版的兼容问题，同时引入新的技术和特性，以适应不断发展的照明技术。 IEC 62386-102关注的核心内容包括： 1. 设备接口：规定了数字化控制装备与灯具或其他系统组件之间的通信接口规范，确保数据交换的准确性和一致性。 2. 功能要求：涵盖控制装备的基本功能，如开关、亮度调节、颜色调整等，以及它们在不同应用场景下的性能表现。 3. 安全措施：强调了控制装备的安全性，包括故障检测、保护机制、数据加密等方面，以保障用户和系统整体的安全。 4. 兼容性与扩展性：考虑到灯具的更新换代和新技术的发展，标准允许有针对特定灯具类型和功能的扩展，同时也考虑到了与现有设备的兼容性。 5. 版权声明：所有内容受版权保护，未经IEC或其成员国国家委员会的书面许可，禁止任何形式的复制或利用，以保护知识产权。 IEC 62386-102-2014标准对于推动全球照明行业的标准化发展，提升照明系统的集成度和效率，起到了关键作用。对于灯具制造商、控制系统开发者以及相关工程技术人员来说，理解和遵循这一标准至关重要，以便在设计和实施照明解决方案时达到最高的质量和性能标准。

– 14 – IEC 62386-102:2014 © IEC 2014

INTRODUCTION

IEC 62386 contains several parts, referred to as series. The 1xx series includes the basic

specifications. Part 101 contains general requirements for system components, Part 102

extends this information with general requirements for control gear and Part 103 extends it

further with general requirements for control devices.

The 2xx parts extend the general requirements for control gear with lamp specific extensions

(mainly for backward compatibility with Edition 1 of IEC 62386) and with control gear specific

features.

The 3xx parts extend the general requirements for control devices with input device specific

extensions describing the instance types as well as some common features that can be

combined with multiple instance types.

This second edition of IEC 62386-102 is published in conjunction with IEC 62386-101:2014

and with the various parts that make up the IEC 62386-2xx series for control gear, together

with IEC 62386-103:2014 and the various parts that make up the IEC 62386-3xx series of

particular requirements for control devices. The division into separately published parts

provides for ease of future amendments and revisions. Additional requirements will be added

as and when a need for them is recognised.

The setup of the standard is graphically represented in Figure 1 below.

Figure 1 – IEC 62386 graphical overview

When this part of IEC 62386 refers to any of the clauses of the other two parts of the

IEC 62386-1xx series, the extent to which such a clause is applicable and the order in which

the tests are to be performed are specified. The other parts also include additional

requirements, as necessary.

All numbers used in this International Standard are decimal numbers unless otherwise noted.

Hexadecimal numbers are given in the format 0xVV, where VV is the value. Binary numbers

are given in the format XXXXXXXXb or in the format XXXX XXXX, where X is 0 or 1 and "x" in

binary numbers means "don't care".

The following typographic expressions are used:

Variables: variableName or variableName[3:0], giving only bits 3 to 0 of variableName

Range of values: [lowest, highest]

Command: “COMMAND NAME”

IEC

101 General requirements -

System components

103 General requirements -

Control devices

102 General requirements -

Control gear

2xx

3xx

--``````,`,`,,`,,`,,````,``,``-`-`,,`,,`,`,,`---

– 18 – IEC 62386-102:2014 © IEC 2014

3.25

startup

time needed to change from lamp off to normal operation of the lamp or failure state

Note 1 to entry: This time includes preheat and ignition.

3.26

strictly monotonic

a function f defined on a subset of the real numbers with real values is called monotonically

increasing, if for all x and y such that x < y one has f(x) < f(y), so f preserves the order.

Likewise, a function is called monotonically decreasing if, whenever x < y, then f(x) > f(y), so

it reverses the order. For this standard strictly monotonic is defined as either monotonically

increasing or monotonically decreasing

3.27

target level

the target light output expected after completion of the current level command

3.28

YES

if a query is asked where the answer is YES, the response will be a backward frame

containing the value of MASK

4 General

4.1 General

The requirements of IEC 62386-101:2014, Clause 4 apply, with the restrictions, changes and

additions identified below.

4.2 Version number

This subclause replaces IEC 62386-101:2014, Subclause 4.2.

The version shall be in the format "x.y", where the major version number x is in the range of 0

to 62 and the minor version number y is in the range of 0 to 2. When the version number is

encoded into a byte, the major version number x shall be placed in bits 7 to 2 and the minor

version number y shall be placed in bits 1 to 0.

At each amendment to an edition of IEC 62386-102 the minor version number shall be

incremented by one.

At a new edition of IEC 62386-102 the major version number shall be incremented by one and

the minor version number shall be set to 0.

The current version number is "2.0".

NOTE Normally 2 amendments on IEC documents are made before a new edition is created.

5 Electrical specification

The requirements of IEC 62386-101:2014, Clause 5 apply.

6 Interface power supply

If a bus power supply is integrated into a control gear, the requirements of

IEC 62386-101:2014, Clause 6 apply.

剩余597页未读，继续阅读

JACKZHOU2009

粉丝: 0
资源: 5

IEC 62386-102:2014版通用控制设备要求

BS EN 62386-102-2014

DALI指令 标准协议 每条指令均有解析 英文

DALI协议指令-所支持的IEC62386-102、IEC62386-202协议指令

IEC 62386-102-2014.zip_102_62386_IEC_IEC 62386-102_iec 62386

IEC 62386-102-2014.pdf

IEC62386-101{ed2.0}-2014.pdf（DALI标准协议 IEC62386-101-2014）

IEC 62386-103-2014

IEC 62386-103-2014.pdf

英文原版IEC 62386-101-2018

IEC 62386-103 设备控制-EN

最新资源

DALI指令标准协议每条指令均有解析英文