斯坦福经典教材：凸优化理论与应用

需积分: 0 44 浏览量更新于2024-07-17 收藏 5.75MB PDF 举报

《凸优化》（Convex Optimization）是一本由斯坦福大学电气工程系的Stephen Boyd教授与加州大学洛杉矶分校电气工程系的Lieven Vandenberghe教授合著的经典教材，该书由剑桥大学出版社出版，于2004年首次发行。本书旨在深入探讨和介绍凸优化这一领域，它在现代信息技术、机器学习、信号处理以及经济学等众多应用中占据核心地位。凸优化是数学优化理论中的一个重要分支，其特点是目标函数和约束条件都是凸函数。这种特殊的结构使得许多优化问题具有全局最优解，并且能够通过解析方法求解，避免了局部最优的问题，极大地提高了算法的效率和稳定性。书中内容涵盖了基础概念如凸集、凸函数、凸分析，以及经典的优化方法如梯度法、拟牛顿法、拉格朗日乘数法等。作者们通过丰富的实例和深入的理论阐述，使读者能够理解和掌握解决实际问题时如何构造和利用凸优化模型。书中还包含了大量的练习题和习题集，便于读者巩固所学知识并进行实践。此外，随着技术的发展，该版第七次印刷在2009年进行了修订，以反映最新的研究进展和技术更新。《凸优化》不仅是研究生和科研人员必备的参考书，也是工业界工程师和数据科学家的实用手册，因为它为理解复杂系统优化提供了强大的工具。对于那些对优化理论感兴趣或者从事涉及优化问题的工作者来说，这本书是深入学习和进一步探索的关键资源。通过阅读这本书，读者将能够建立起坚实的凸优化理论基础，并学会如何将其应用于解决现实世界中的各种挑战。

2 1 Introduction

for all x, y ∈ R

and all α, β ∈ R with α + β = 1, α ≥ 0, β ≥ 0. Comparing (1.3)

and (1.2), we see that convexity is more general than linearity: inequality re pl aces

the more res tr i cti ve equality, and the inequality must hold only for certain values

of α and β. Since any linear program is therefore a convex optimization problem,

we can consider convex optimization to be a generalization of linear programming.

1.1.1 Applications

The optimization problem (1.1) is an abstraction of the problem of making the best

possible choice of a vector in R

from a set of candidate choices. The variable x

represents the choice made; the constraints f

(x) ≤ b

represent ﬁrm requir ements

or speciﬁcations that limit the possible choices, and the objective value f

(x) rep-

resents the cost of choosing x. (We can also think of −f

(x) as representing the

value, or utility, of choosing x.) A solution of the optimization problem (1.1) corre-

sponds to a choice that has minimum cost (or maximum utility), among all choices

that meet the ﬁrm requirements.

In portfolio optimization, for example, we seek the best way to invest some

capital in a set of n assets. The variable x

represents the investment in the ith

asset, so the vector x ∈ R

describes the overall portfolio allocati on across the set of

assets. The constraints might represent a limit on the budget (i.e., a limit on the

total amount to be invested), th e requirement that investments are nonnegative

(assuming short positions are not allowed), and a minimum acceptable value of

expected return for the whole portfolio. The objective or cost function might be

a measure of the overall risk or variance of the portfolio retu r n. In this case,

the optimization problem (1.1) corresponds to choosing a portfolio allocation that

minimizes ri sk , among all possible allocations that meet the ﬁrm requirements.

Another example is device sizing in electronic design, which is the task of choos-

ing the width and length of each device in an electronic circuit. Here the variables

represent the widths and lengths of the devices. The constraints represent a va-

riety of engineering requirements, such as limits on the device sizes imposed by

the manufacturing process, timing requirements that ensure that the circuit can

operate reliably at a speciﬁed speed, and a limit on the total area of the circuit. A

common objective in a device sizing problem is the total power consumed by the

circuit. The optimization problem (1.1) is to ﬁnd the device sizes that satisfy the

design requirements (on manufacturability, timing, and area) and are most power

eﬃcient.

In data ﬁtting, the task is to ﬁnd a model, from a family of potential models,

that best ﬁts some observed data and prior information. Here the variables are the

parameters in the model, and the cons tr aints can represent prior information or

required l imit s on the parameters (such as nonnegativity). The objective function

might be a measure of misﬁt or prediction error between the observed data and

the values predicted by t he model, or a statistical measure of the u nli keliness or

implausibility of the parameter values. The optimization probl em (1.1) is to ﬁnd

the model parameter values that are consistent with the prior information, and give

the smallest misﬁt or prediction error with the observed data (or, in a statistical

1.1 Mathematical optimization 3

framework, are most likely).

An amazing variety of practical problems involving decision making (or system

design, analysis, and operation) can be cast in the form of a mathematical opti-

mization problem, or some variation such as a multicriterion optimization problem.

Indeed, mathematical optimization has become an important tool in many areas.

It is widel y used in engineering, in electronic design automation, automatic con-

trol systems, and optimal design problems arising in civil, chemical, mechanical,

and aerospace engineering. Optimization is used for problems arising in network

design and operation, ﬁnance, supply chain management, scheduling, and many

other areas. The list of applications is still steadily expanding.

For most of these applications, mathematical optimization is used as an aid to

a human deci si on maker, system designer, or system operator, who supervises the

process, checks the results, and modiﬁ es the problem (or the solution approach)

when necessary. This human decision maker also carries out any actions suggested

by the optimization problem, e.g., buying or selling asset s to achieve the opt imal

portfolio.

A r el atively recent phenomenon opens the possibility of many other applications

for mathematical optimization. With the proliferation of computers embedded in

products, we have seen a rapid growth in embedded optimization. In these em-

bedded applications, optimization is used to automatically make real-time choices,

and even carry out the associated actions, with no (or little) human intervention or

oversight. In some application areas, this blending of tradition al automatic control

systems and embedded optimization is well under way; in others, it is just start-

ing. Embedded real-time optimization raises some new challenges: in particular,

it requires solution methods that are extremely reliable, and solve problems in a

predictable amount of time (and memory).

1.1.2 Solving optimization problems

A solution method for a class of optimization problems is an algor ith m that com-

putes a solution of the problem (to some given accuracy), given a particular problem

from the class, i.e., an instance of the problem. Since the late 1940s, a large eﬀort

has gone into developing algorithms for solving various classes of optimization prob-

lems, analyzing their properties, and developing good software implementations.

The eﬀectiveness of these algorithms, i.e., our ability to solve the optimization prob-

lem (1.1), varies considerably, and depends on factors such as the particular forms

of the objective and constraint functions, how many variables and constraints there

are, and special structure, such as sparsity. (A problem is sparse if each constr aint

function depends on only a small number of the variables).

Even when the objective and constraint functions are smooth (for example,

polynomials) the general optimization problem (1.1) is surprisingly diﬃcult to solve.

Approaches to the general problem therefore involve some kind of compromise, such

as very long computation time, or the possibility of not ﬁnding the solution. Some

of these methods are discussed in §1.4.

There are, however, some important exceptions to the general rule that most

optimization problems are diﬃcul t to solve. For a few problem classes we have

4 1 Introduction

eﬀective algorithms that can reliably solve even large problems, with hundreds or

thousands of variables and constraints. Two imp or tant and well known examples,

described in §1.2 below (and in detail in chapter 4), are least-squares problems and

linear programs. It i s less well known that convex optimization is another exception

to the rule: Like least-squares or linear programming, there are very eﬀe ct ive

algorithms that can reliably and eﬃciently solve even large convex problems.

1.2 Least-squares and linear programming

In this section we describe two very widely known and used special subclasses of

convex optimization: least-squares and linear programming. (A c omple te technical

treatment of these problems will be given in chapter 4.)

1.2.1 Least-squares problems

A least-squares problem is an optimi zati on problem with no constraints (i.e., m =

0) and an objective which is a sum of s qu ar es of terms of the form a

x − b

minimize f

(x) = kAx − bk

i=1

x − b

)

(1.4)

Here A ∈ R

k×n

(with k ≥ n), a

are the rows of A, and the vector x ∈ R

is the

optimization variable.

Solving l eas t-s quares problems

The solution of a least-squares problem (1.4) can be reduce d to solving a set of

linear equations ,

A)x = A

so we have the analytical solution x = (A

−1

b. For least-squares problems

we have good algorithms (and software implementations) for solving the problem to

high accuracy, with very high reliability. The least-squares problem can be solved

in a time approximately proportional to n

k, with a known constant. A current

desktop computer can solve a least-squares problem with hundreds of variables, and

thousands of terms, in a few seconds; more powerful computers, of course, can solve

larger problems, or the same size problems, faster. (Moreover, these solution times

will decrease exponentially in the future, according to Moore’s law.) Algorithms

and software for solving least-squares problems are reliable enough for embedded

optimization.

In many cases we can solve even larger least-squares problems, by exploiting

some special structure in the coeﬃcient matrix A. Suppose, for example, that the

matrix A is sparse, which means that it has far fewer than kn nonzero entries. By

exploiting sparsity, we can usually solve the least-squares problem much faster than

order n

k. A current desktop computer can solve a sparse least-squares problem

1.2 Least-squares and li near programming 5

with tens of thousands of variables, and hundreds of thousands of terms, in around

a minute (although this depends on the particular sparsity pattern).

For extr eme ly large problems (say, with millions of variables), or for problems

with exacting real-time c omput in g requirements, solving a least-square s problem

can be a challenge. But in the vast majority of cases, we can say th at existing

methods are very eﬀective, and extremely reliable. Ind ee d, we can say that solving

least-squares problems (that are not on the boundary of what is currently achiev-

able) is a (mature) technology, that can be reliably used by many people who do

not know, and do not need to know, the details.

Using least-squares

The least-squ are s problem is the basis for regression analysis, optimal control, and

many parameter estimation and data ﬁtting methods. It has a number of statistical

interpretations, e.g., as maximum likelihood estimation of a vector x, given linear

measurements corr u pt ed by Gaussian measurement errors.

Recognizing an optimization problem as a least-s q uar es problem is straightfor-

ward; we only need to verify that the objective is a quadratic function (and then

test whether th e associated quadratic form is positive semideﬁnite). While the

basic l east -s q uar es problem has a simple ﬁxed form, several standard techniques

are used to increase its ﬂexibility in applications.

In weighted least-squares, the weighted least-squares cost

i=1

x − b

)

where w

, . . . , w

are positive, is minimized. (This problem is readily cast and

solved as a standard least-squares problem.) Here the weights w

are chosen to

reﬂect diﬀering levels of concern about the sizes of the t er ms a

x − b

, or simply

to inﬂuence the solution. In a statistical setting, weighted least-squares arises

in estimation of a vector x, given linear measurements corru pt ed by errors with

unequal variances.

Another technique in least-squares is regularization, in which extra terms are

added to the cost function. In the simpl es t case, a positive multiple of the sum of

squares of the variables is added to the cost function:

i=1

x − b

)

+ ρ

i=1

where ρ > 0. (This pr obl em too can be formulated as a standard least-squares

problem.) The extra terms penalize large values of x, and result in a sensible

solution in cases when minimizing the ﬁrst sum only does not. The parameter ρ is

chosen by the user to give the right trade-oﬀ between making the original objective

function

i=1

x−b

)

small, while keeping

i=1

not too big. Regularization

comes up in statistical estimation when the vector x to be e st imate d is given a prior

distribution.

Weighted least-squares and regul ari zati on are covered in chapter 6; their sta-

tistical interpretations are given in chapter 7.

6 1 Introduction

1.2.2 Linear programming

Another important class of optimization problems is linear programming, in which

the objective and all const r aint functions are linear:

minimize c

subject to a

x ≤ b

, i = 1, . . . , m.

(1.5)

Here the vectors c, a

, . . . , a

∈ R

and scalars b

, . . . , b

∈ R are problem pa-

rameters that specify the object ive and constraint functions.

Solving l ine ar programs

There is no simple analytical formula for the solution of a linear program (as there

is for a least-squares problem), but there are a variety of very eﬀective methods for

solving them, including Dantzig’s simplex method, and the more recent interior-

point metho d s descr ibed later in this book. While we cann ot give the exact number

of arithmetic operations required to solve a linear program (as we can for least-

squares), we c an establish rigorous bounds on the number of operations required

to solve a linear program, to a given accuracy, using an interior-point method. The

complexity in practice is order n

m (assuming m ≥ n) but with a constant that is

less well characterized than for least-sq uar es . These algorithms are quite r e li able,

although perhaps not quite as re liab le as methods for least-squares. We can easily

solve problems with hundreds of variables and thousands of constraints on a small

desktop computer, in a matter of seconds. If the problem is sparse, or has some

other exploitable structure, we can often solve problems with tens or hundreds of

thousands of variables and constraints.

As with least-squares problems, it is still a challenge to solve extremely large

linear pr ograms, or to solve linear programs with ex actin g real-time computing re-

quirements. But, like least-squares, we can say that solv in g (most) linear programs

is a mature technology. Linear programming solvers can be (and are) embedded in

many tools and applications.

Using linear programming

Some applications lead directly to linear programs in the form (1.5), or one of

several other standard forms. In many other cases the original optimization prob-

lem does not have a standard linear program form, but can be tr ans for med to an

equivalent linear program (and then, of course, solved) using techniques covered in

detail in chapter 4.

As a simple example, consider the Chebyshev approximation problem:

minimize max

i=1,...,k

x − b

(1.6)

Here x ∈ R

is the variable, and a

, . . . , a

∈ R

, b

, . . . , b

∈ R are parameters

that specify t he problem instance. Note the resemblance to the least-squares prob-

lem (1.4). For both problems, the objective is a measure of the size of the terms

x − b

. In least-squares, we use the sum of squares of the terms as objective,

whereas in Chebyshev approximation, we u s e the maximum of the absolute values.

剩余729页未读，继续阅读

鹿馨匀

粉丝: 0
资源: 2

斯坦福经典教材：凸优化理论与应用

国外经典教材Convex Optimization

Convex Optimization_Boyd_英文版_凸优化_王会宁译_中文版

convex optimization.zip

convex optimization

【java毕业设计】校内跑腿业务系统源码（springboot+vue+mysql+说明文档）.zip

【java毕业设计】大学志愿填报系统源码（springboot+vue+mysql+说明文档）.zip

基于java的网吧管理系统答辩PPT.pptx

基于java的基于SSM架构的网上书城系统答辩PPT.pptx

tornado-6.1-cp37-cp37m-win32.whl

气泡排序、插入排序、选择排序、快速排序、希尔排序、堆排序、合并排序-SortAlgorithm.zip

最新资源