WRT160N无线-N宽带路由器用户指南-英文版

思科

WRT160N

需积分: 9 150 浏览量更新于2024-07-20 收藏 3.57MB PDF 举报

身份认证购VIP最低享 7 折!

领优惠券(最高得80元）

"WRT160N英文用户手册提供了这款无线-N宽带路由器的详细设置指南，包括注意事项、警告提示以及相关的在线资源链接。" **关于WRT160N无线-N宽带路由器** WRT160N是思科公司推出的一款家用无线路由器，它支持802.11n标准，提供了高速的无线网络连接，适用于家庭或小型办公室环境。该路由器设计用于提升网络性能，提供更稳定的无线信号和更广的覆盖范围。 **图标描述** 手册中采用了一些特定的图标来帮助用户理解关键信息： 1. **注意(Nota)**：带有此标记的内容表示需要注意的事项，对正确使用产品至关重要。 2. **警告(Warning)**：此警告图标意味着可能存在潜在危险，如果不按照指示操作，可能会导致设备损坏或人身伤害。 3. **WEB(网站)**：这个地球图标表示与之相关的网站地址或电子邮件地址，可能是支持网站、更新信息或其他相关服务。 **在线资源** 用户可以通过以下网站获取更多支持和信息： 1. **Linksys官网**：提供产品信息、驱动程序下载、用户论坛和故障排除指南（www.linksys.com）。 2. **Linksys国际**：面向全球用户的网站，包含特定区域的产品信息和服务（www.linksys.com/international）。 3. **词汇表(Glossary)**：对于技术术语不熟悉的用户，可以通过Linksys的词汇表网站（www.linksys.com/glossary）查找解释。 4. **网络安全(Network Security)**：提供有关如何保护您的网络免受未授权访问的指导和建议（www.linksys.com/security）。 **版权和商标** Linksys是思科的注册商标或商标，所有提供的产品和服务均受版权和商标法保护。用户在使用路由器时，应遵守所有的法律条款和使用协议。 **手册内容** 手册通常会涵盖以下主题： 1. **开箱及设备安装**：如何正确设置和连接路由器，包括电源连接、线路布置和天线安装。 2. **网络配置**：如何通过Web界面进行基本和高级设置，如SSID、加密方式、DHCP服务器、端口转发等。 3. **无线连接**：设置无线网络，包括无线安全选项（如WEP、WPA、WPA2）和连接设备。 4. **故障排查**：当遇到网络问题时，提供诊断和解决步骤。 5. **维护与更新**：如何检查和安装固件更新，以保持路由器的安全性和性能。 6. **技术支持**：如何联系Linksys的客户服务以获取进一步的帮助。这份详细的英文手册将引导用户逐步完成WRT160N路由器的安装、配置和日常使用，确保用户能够充分利用其功能并确保网络的安全稳定。

资源详情

资源推荐

Chapter 3

Advanced Configuration

Wireless-N Broadband Router

Chapter 3:

Advanced Configuration

After setting up the Router with the Setup Wizard (located

on the CD-ROM), the Router will be ready for use. However,

if you’d like to change its advanced settings, use the

Router’s web-based utility. This chapter describes each

web page of the utility and each page’s key functions. You

can access the utility via a web browser on a computer

connected to the Router.

The web-based utility has these main tabs: Setup,

Wireless, Security, Access Restrictions, Applications &

Gaming, Administration, and Status. Additional tabs will

be available after you click one of the main tabs.

NOTE: When first installing the Router, you

should use the Setup Wizard on the Setup

CD-ROM. If you want to configure advanced

settings, use this chapter to learn about the

web-based utility.

How to Access the Web-Based Utility

To access the web-based utility, launch the web browser on

your computer, and enter the Router’s default IP address,

192.168.1.1, in the Address field. Then, press Enter.

A login screen will appear. (Non-Windows XP users will

see a similar screen.) Leave the User name field blank. The

first time you open the Web-based utility, use the default

password admin. (You can set a new password from the

Administration tab’s Management screen.) Click OK to

continue.

Setup > Basic Setup

The first screen that appears is the Basic Setup screen. This

allows you to change the Router’s general settings.

Setup > Basic Setup

Internet Setup

The Internet Setup section configures the Router to your

Internet connection. Most of this information can be

obtained through your ISP.

Internet Connection Type

Select the type of Internet connection your ISP provides

from the drop-down menu. These are the available types:

Automatic Configuration - DHCP

Static IP

PPPoE

PPTP

L2TP

Telstra Cable

Automatic Configuration - DHCP

By default, the Router’s Internet Connection Type is set

to Automatic Configuration - DHCP, which should be

kept only if your ISP supports DHCP or you are connecting

through a dynamic IP address. (This option usually applies

to cable connections.)

Internet Connection Type > Automatic Configuration - DHCP

•

Chapter 3

Advanced Configuration

Wireless-N Broadband Router

Static IP

If you are required to use a permanent IP address to

connect to the Internet, select Static IP.

Internet Connection Type > Static IP

Internet IP Address This is the Router’s IP address, when

seen from the Internet. Your ISP will provide you with the

IP Address you need to specify here.

Subnet Mask This is the Router’s Subnet Mask, as seen

by users on the Internet (including your ISP). Your ISP will

provide you with the Subnet Mask.

Default Gateway Your ISP will provide you with the IP

address of the ISP server.

DNS 1-3 Your ISP will provide you with at least one DNS

(Domain Name System) server IP address.

PPPoE

Some DSL-based ISPs use PPPoE (Point-to-Point Protocol

over Ethernet) to establish Internet connections. If you are

connected to the Internet through a DSL line, check with

your ISP to see if they use PPPoE. If they do, you will have

to enable PPPoE.

Internet Connection Type > PPPoE

Username and Password Enter the Username and

Password provided by your ISP.

Service Name If provided by your ISP, enter the Service

Name.

Connect on Demand: Max Idle Time You can configure

the Router to cut the Internet connection after it has been

inactive for a specified period of time (Max Idle Time). If

your Internet connection has been terminated due to

inactivity, Connect on Demand enables the Router to

automatically re-establish your connection as soon as you

attempt to access the Internet again. To use this option,

select Connect on Demand. In the Max Idle Time field,

enter the number of minutes you want to have elapsed

before your Internet connection terminates. The default

Max Idle Time is 15 minutes.

Keep Alive: Redial Period If you select this option,

the Router will periodically check your Internet

connection. If you are disconnected, then the Router

will automatically re-establish your connection. To use

this option, select Keep Alive. In the Redial Period field,

you specify how often you want the Router to check

the Internet connection. The default Redial Period is

30 seconds.

PPTP

Point-to-Point Tunneling Protocol (PPTP) is a service that

applies to connections in Europe only.

Internet Connection Type > PPTP

If your ISP supports DHCP or you are connecting through

a dynamic IP address, then select Obtain an IP Address

Automatically. If you are required to use a permanent IP

address to connect to the Internet, then select Specify an

IP Address. Then configure the following:

Specify an IP Address This is the Router’s IP address,

as seen from the Internet. Your ISP will provide you

with the IP Address you need to specify here.

Subnet Mask This is the Router’s Subnet Mask, as

seen by users on the Internet (including your ISP). Your

ISP will provide you with the Subnet Mask.

Default Gateway Your ISP will provide you with the

IP address of the ISP server.

DNS 1-3 Your ISP will provide you with at least one

DNS (Domain Name System) server IP address.

PPTP Server IP Address Your ISP will provide you with

the IP address of the PPTP server.

Username and Password Enter the Username and

Password provided by your ISP.

Connect on Demand: Max Idle Time You can configure

the Router to cut the Internet connection after it has been

inactive for a specified period of time (Max Idle Time). If

your Internet connection has been terminated due to

•

剩余37页未读，继续阅读

tzh9036

粉丝: 0
资源: 1

WRT160N无线-N宽带路由器用户指南-英文版

思科WRT160Nv2路由器设置中文图文教程超级详细

wrt310n dd-wrt

packet tracer中laptop-pt和wrt300n未成功建联的原因是什么

WRT300N型号介绍

WRT300N怎么连线

思科模拟器WRT300N怎么连线

思科路由WRT300N配置

DD-WRT镜像文件在哪下载

x-wrt刷openwrt

路由器刷入dd-wrt

如何在DD-WRT中启动web服务

DD-WRT的bin文件如何在Linux系统中安装

如何通过命令启动DD-WRT的web服务

用Packet Tracer完成网络配置与管理实验： 无线路由器策略要求：1.不允许PC0产生HTTPS、telnet、ICMP流量 2.不允许PC1产生ftp流量 3.不允许PC2产生HTTP流量 4.配置MAC过滤列表

如何通过命令行修改DD-WRT的br0地址

ValueError: Can't calculate derivative wrt -0.0335762377301611.

ubuntu20.04安装wrt

ddwrt刷回tp原厂941n固件

windows系统下常用的软路由开源框架有什么

最新资源

用Packet Tracer完成网络配置与管理实验：无线路由器策略要求：1.不允许PC0产生HTTPS、telnet、ICMP流量 2.不允许PC1产生ftp流量 3.不允许PC2产生HTTP流量 4.配置MAC过滤列表