the driver install.
• Pass:
1. (The OS identifies and automatically installs the SSP xHCI controller driver
OR
2. The vendor-recommended install procedure installs the SSP xHCI controller driver)
AND
3. The SSP xHCI controller driver is installed correctly and operates (no yellow exclamation point is
displayed in device manager)
• Fail:
1. The SSP xHCI controller driver does not install
OR
2. The SSP xHCI controller driver is installed correctly but is non-operational (yellow exclamation point is
displayed in device manager)
2. Peripheral Enumeration and Driver Installation
Do not install any drivers or software for any device in the SSP Interop Tree prior to
attaching the SSP Interop Tree to the SSP xHCI controller.
Attach the SSP Interop Tree by connecting Hub SSP1 into any port on the SSP xHCI
controller.
o If the SSP xHCI controller has an embedded hub, then unplug Hub SSP3 and Hub SSP4;
re-plug Hub SSP4 directly into port one of Hub SSP2.
For each device in the Interop Tree (including the DUT) follow the vendor-recommended
install procedure. Ensure that all drivers listed for each device in the Interop Tree match what
is currently being tested under Driver Verifier (applies to Windows OS). To display the
existing drivers being verified by Driver Verifier:
o Open the run box (press the Windows Key + R together).
o Type the command “Verifier”.
o Select “Display existing settings”
• Pass:
1. All Interop Tree devices enumerate
AND
2. All Interop Tree devices drivers are installed either automatically or through the vendor recommended
install procedure
AND
3. All Interop Tree devices do not require a reboot
AND
4. All Interop Tree devices are correctly identified by Device Manager and no yellow exclamation point is
shown for any device
AND
5. (Software installs without any software crashes or a blue screen
OR
6. No software required)
• Fail:
1. Any device cannot be installed because it requires driver installation or application software BEFORE the
device is ever plugged in
OR
2. Any device does not enumerate or blue screens during enumeration
OR
我的内容管理
展开
