HASSELBLAD哈苏H4D使用说明书.pdf

版权申诉

用户手册

153 浏览量更新于2024-03-02 评论收藏 11.09MB PDF 举报

身份认证购VIP最低享 7 折!

领优惠券(最高得80元）

资源详情

资源评论

资源推荐

H4D

Typical camera grip display when changing

settings.

Command indication

The upper row on the screens describes commands (which

change according to the setting). The button immediately above

each command eﬀects the change. So in this case, for example,

you would press the FLASH button to ‘exit’ from the screen.

See note below.

Settings symbols

Symbolize the options available when settings are changed.

The active symbol is depicted by a drop shadow.

Control wheel description and direction

Arrowheads symbolize which control wheel should be used to

change the setting they are beside. In this case, the Bracketing

option is chosen by the front control wheel and the number of

captures in that option is chosen by the rear control wheel.

. . .

= front control wheel

= rear control wheel

Setting information

The lower row on the screen displays information about the

current state of the setting. In short, the upper row displays

what you can do, and the lower row displays the current state of

settings or what you have done.

Typical camera grip display.

Grip display − overview

Focus setting

(Autofocus setting,

single shot mode)

Drive condition

(Single setting)

Shutter speed setting

(1/400s)

ISO setting

(100 ISO)

Low battery symbol

Capture counter

(28 shots remaining on chosen

storage medium)

Metering method

indication

(Centre weighted)

White balance

(Daylight)

Flash condition indication

(No exposure compensation,

normal ﬂash synchronisation)

Aperture setting

(f/5.6)

Exposure mode indication

(Aperture priority setting)

Exposure Value display

(EV 13.8)

H4D

Spirit level

The integrated electronic spirit level provides a rapid and accurate

way of ensuring the camera is either horizontally neutral in align-

ment (level) and/or vertically neutral in alignment (plumb). It uses

two methods that are fully visible on the sensor unit display and

partly visible in the viewﬁnder. The method is selected by the cam-

era automatically according to alignment. So, if the camera is in a

relatively normal orientation, then Normal is selected and when

the camera is in a more extreme orientation then Repro is selected.

You can activate the spirit level (for both sensor unit and viewﬁnder

displays) by holding down the View Mode button for a second, or,

by re-assigning the TRUE FOCUS / AE-L / STOP DOWN or M.UP

button as an activator. See Custom Options #4, #5, #6 and #7 for

details.

Normal: Generally used when the camera is mounted on a tripod/

stand in either landscape or portrait orientation. Allows the cam-

era to be correctly aligned in two planes regardless of apparent

deviations in the viewﬁnder. Particularly useful for landscape work

where most of the horizon is hidden, for example, or architectural/

interior work where wide angle lenses can often create a diﬃcult

situation to level the camera visually.

Repro: Normally used when the camera is mounted on a tripod/

stand in a 'repro' alignment, that is, camera pointing directly down-

wards (this feature also works pointing directly upwards). Ensures

that the camera is in a truly perpendicular alignment.

In use: Sensor unit display – Three scales can be seen in Standard mode.

The scale along the lower edge and to the right hand side (in land-

scape mode) require you to alter the camera's orientation to center

the yellow 'bubbles'. When centered, these bubbles become green.

The third central scale consisting of a large circle with cross-hairs

provides an alternative combined display. The content of the circle

changes from yellow to green when the horizontal orientation is

correct. In Repro mode, the central scale is also a 'bubble' type.

Again, the two yellow bubbles become green when centered in

their respective scales. As an alternative, the central blue bubble can

be centered within the green circle (no color change to the bubble).

Viewﬁnder display – Only horizontal alignment can be seen in the

viewﬁnder display. It uses the bubble method as described above

except the bubble becomes black when the camera is level. Cus-

tom calibration can also be used.

Calibration: There is a default calibration for either mode which is

selected automaticaly. However you can store a custom calibration

for various purposes.

1) Press the Preview button for one second (toggle function) to

activate the spirit level feature.

2) The text along the bottom of the display reads EXIT,

Standard, MODE.

3) Press the MODE button (Approval/OKbutton).

4) The text along the bottom of the display now reads CAL,

User, MODE, and a green user icon appears in the top left of

the display.

5) When you are satisﬁed that the camera is securely in the cho-

sen orientation, press the CAL button (Menu/Exit button) to

store the new setting.

6) Press the MODE button to toggle between default and custom

settings.

Custom settings are retained for future use. To make a new custom

setting, repeat the above procedure.

5 6

Normal (at default setting)

Not level Level

Not level

Repro (at default setting)

Level

The spirit level as it appears in the viewﬁnder display.

Activate by:

1) Holding down (not clicking)

the preview button.

2) Re-assigning the True Focus,

M.UP, AE-L or STOP DOWN but-

ton to Spirit Level (in Custom

Options).

H4D

Buttons and controls − details

Shutter release button A

This button has half-press and full-press positions. By pressing half-way (or softly) the

camera, auto focus function and exposure meter can be activated. By pressing all the

way down (or more ﬁrmly) the shutter will be released (or the chosen exposure proce-

dure for example, the self timer is activated with this button).

FLASH/(CONTROLLOCK)button / (EXIT) B

This is a triple function button. If you press the button for one second, the beeper will

sound (if set) and a key symbol will appear on the grip display signifying that the con-

trols (except the shutter release) have been locked and therefore cannot be altered unin-

tentionally in use. Press the button for one second again to unlock (this function can be

altered to lock all controls or control wheels only in Custom Options #18).

Quickly clicking the button will access the ﬂash settings information on the display from

the main screen. See under Flash /Strobe - controls and displays for full details.

This button also acts as the EXIT button for many other settings including an EXIT but-

ton when navigating the sensor unit menu.

AF button / (ON) / (SEL.) C

This is a triple function button. Press this button to directly access the autofocus/manual

focus choice screen from the main screen. See under Lenses for full details. It also acts as

the ON and SEL. (= select) buttons for many other settings.

ISO/WBbutton / (SAVE) / (ENTER) D

This is a triple function button. It provides direct access to the ISO and White Balance

settings (see under Light Metering & Exposure Control for full details).

It also acts as the SAVE and ENTER buttons for many other settings as well as an OK

button when navigating the sensor unit menu.

Front control wheel E

The front and rear control wheels are used to make changes in exposure settings, access

the grip menu for settings as well as navigate the sensor unit’s menu. The eﬀect of the

wheels’ direction is customizable.

MENUbutton F

Accesses the ﬁrst level of the menu for settings changes.

Illumination/Battery status button G

Press to illuminate the display. Remains active until camera enters standby mode. Hold

down to access battery status/general information screen.

ON.OFF(PROFILES/ESC)button H

Press the button for 1 second to activate the camera. The H4D start-up logo will appear

and then the main screen. After a few seconds (customizable) the camera will enter

Standby mode.

A long press of the button will turn the camera oﬀ completely (even from Standby

mode) signiﬁed by an audible signal (if set). A quick ‘click’ on the button will access the

Proﬁles section of the menu from the main screen.

Note the diﬀerence in results between a long press and a quick click of this button.

B C D E

剩余141页未读，继续阅读

qingguo1979

粉丝: 28
资源: 7300

会员权益专享

"HASSELBLAD H4D使用说明书：镜头、对焦和光度测量"

评论0

会员权益专享

最新资源

"HASSELBLAD H4D使用说明书：镜头、对焦和光度测量"

评论0

HASSELBLAD哈苏H3D使用说明书.pdf

HASSELBLAD哈苏H5D使用说明书.pdf

HASSELBLAD哈苏H4X使用说明书.pdf

大疆的无人机摄像头和通信都是用的什么

HASSELBLAD哈苏h3dii使用说明书.pdf

HASSELBLAD哈苏H1D使用说明书.pdf

HASSELBLAD哈苏A6D使用说明书.pdf

HASSELBLAD哈苏H2D使用说明书.pdf

HASSELBLAD哈苏203FE使用说明书.pdf

HASSELBLAD哈苏205FCC使用说明书.PDF

【车牌识别】 GUI BP神经网络车牌识别（带语音播报）【含Matlab源码 668期】.zip

【作业视频】六年级第1讲--计算专项训练(2022-10-28 22-51-53).mp4

3文件需求申请单.xls

【脑肿瘤检测】 GUI SOM脑肿瘤检测【含Matlab源码 2322期】.zip

GOGO语言基础教程、实战案例和实战项目讲解

全国计算机等级考试二级笔试样卷C语言程序设计

Excel模板个人简历文艺清新单页01.docx

【图像边缘检测】自适应阈值的八方向和四方向sobel图像边缘检测【含Matlab源码 2058期】.zip

HC070-3.5标定版描述文件及标定版ps文件

【目标跟踪】 GUI帧差法结合卡尔曼滤波行人姿态识别【含Matlab源码 1127期】.zip

会员权益专享

最新资源