SCAN921023, SCAN921224
www.ti.com
SNLS133D –JAN 2001–REVISED APRIL 2013
TRI-STATE
The Serializer enters TRI-STATE when the DEN pin is driven low. This puts both driver output pins (DO+ and
DO−) into TRI-STATE. When you drive DEN high, the Serializer returns to the previous state, as long as all other
control pins remain static (SYNC1, SYNC2, PWRDN, TCLK_R/F).
When you drive the REN pin low, the Deserializer enters TRI-STATE. Consequently, the receiver output pins
(ROUT0–ROUT9) and RCLK will enter TRI-STATE. The LOCK output remains active, reflecting the state of the
PLL.
Table 1. Random Lock Times for the SCAN921224
(1)
66 MHz Units
Maximum 18 μS
Mean 3.0 μS
Minimum 0.43 μS
Conditions: PRBS 2
15
, V
CC
= 3.3V
(1) Difference in lock times are due to different starting points in the data
pattern with multiple parts.
Test Modes
In addition to the IEEE 1149.1 test access to the digital TTL pins, the SCAN921023 and SCAN921224 have two
instructions to test the LVDS interconnects. The first is EXTEST. This is implemented at LVDS levels and is only
intended as a go no-go test (e.g. missing cables). The second method is the RUNBIST instruction. It is an "at-
system-speed" interconnect test. It is executed in approximately 33mS with a system clock speed of 66MHz.
There are two bits in the RX BIST data register for notification of PASS/FAIL and TEST_COMPLETE. Pass
indicates that the BER (Bit-Error-Rate) is better than 10
-7
.
An important detail is that once both devices have the RUNBIST instruction loaded into their respective
instruction registers, both devices must move into the RTI state within 4K system clocks (At a SCLK of 66Mhz
and TCK of 1MHz this allows for 66 TCK cycles). This is not a concern when both devices are on the same scan
chain or LSP, however, it can be a problem with some multi-drop devices. This test mode has been simulated
and verified using TI's SCANSTA111.
Figure 1. DIN0 Held Low-DIN1 Held High Creates Figure 2. DIN4 Held Low-DIN5 Held High Creates
an RMT Pattern an RMT Pattern
Figure 3. DIN8 Held Low-DIN9 Held High Creates an RMT Pattern
Copyright © 2001–2013, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Links: SCAN921023 SCAN921224
剩余24页未读，继续阅读
不觉明了
- 粉丝: 3499
- 资源: 5759
我的内容管理
展开
最新资源
- JDK 17 Linux版本压缩包解压与安装指南
- C++/Qt飞行模拟器教员控制台系统源码发布
- TensorFlow深度学习实践：CNN在MNIST数据集上的应用
- 鸿蒙驱动HCIA资料整理-培训教材与开发者指南
- 凯撒Java版SaaS OA协同办公软件v2.0特性解析
- AutoCAD二次开发中文指南下载 - C#编程深入解析
- C语言冒泡排序算法实现详解
- Pointofix截屏：轻松实现高效截图体验
- Matlab实现SVM数据分类与预测教程
- 基于JSP+SQL的网站流量统计管理系统设计与实现
- C语言实现删除字符中重复项的方法与技巧
- e-sqlcipher.dll动态链接库的作用与应用
- 浙江工业大学自考网站开发与继续教育官网模板设计
- STM32 103C8T6 OLED 显示程序实现指南
- 高效压缩技术：删除重复字符压缩包
- JSP+SQL智能交通管理系统：违章处理与交通效率提升
资源上传下载、课程学习等过程中有任何疑问或建议，欢迎提出宝贵意见哦~我们会及时处理！
点击此处反馈
