System Administration addboard(1M)
Last Modified 02 Jan 2002 SMS 1.2 7
-c function Valid function values are assign, connect,orconfigure. This
option is used to control the configuration state transition. Each
successive function builds upon the last. For example, configure
first assigns then connects the board before configuring it.
Note – If the addboard command fails, a board does not return
to its original state. A dxs or dca error message is logged to the
domain. If the error is recoverable you can retry the command. If
it is unrecoverable, you will need to reboot the domain in order to
use that board.
The possible transition states and their meaning are as follows:
assign Assigns the board to the logical domain. This
is a board state in which the domain has sole
access to the board; however, the board is not
active. Once assigned, the board can be
connected or configured into the domain
either by using setkeyswitch on or using the
connect or configure options.
connect Assigns the board to the logical domain (if it
is not already).
Transitions the board into the
connected|unconfigured state. In this
state, the system board is assigned to the
logical domain and connected (becomes
active). This state allows normal system
access to hardware resources on the board, but
the hardware resources of the board are not
represented by the normal Solaris software
data structures and thus are not available for
use by the Solaris operating environment.
Operations allowed on the board are limited
to configuration administration operations.
This is an intermediate state and does not
have any standalone implementation at this
time.
configure Assigns the board to the logical domain (if it
is not already) .
Transitions the board into the
connected|configured state. In this state,
the board is not only assigned, active and
connected to a domain, but also configured
into the Solaris operating environment. The
hardware resources on the board can be used
by Solaris software.
我的内容管理
展开
