没有合适的资源?快使用搜索试试~ 我知道了~
首页昭营科技 PC/104 嵌入式主板VSX-6154 用户使用手册.pdf
资源详情
资源评论
资源推荐
VSX-6154
DM&P Vortex86SX 300MHz
PC/104 CPU Module
with 4S/2USB/VGA/LCD/LAN/GPIO 128MB DDR2 Onboard
User’s Manual
(Revision 1.2A)
Copyright
The information in this manual is subject to change without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may be contained in this document. And makes no commitment to update or to
keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,
in any form or by any means without the prior written permission of the ICOP Technology Inc..
Copyright 2007 ICOP Technology Inc.
Manual No. IUM6154000-01 Ver.1.0A
September, 2007
Manual No. IUM6154000-01 Ver.1.1A
December , 2007
Manual No. IUM6154000-01 Ver.1.2A
May, 2008
Trademarks Acknowledgment
Vortex86SX is the registered trademark of ICOP Technology Inc.
Other brand names or product names appearing in this document are the properties
and registered trademarks of their respective owners. All names mentioned herewith
are served for identification purpose only.
T a b l e o f C o n t e n t s
T a b l e o f C o n t e n t s .............................................................iii
C h a p t e r 1 Introduction……………………………………………1
1.1 Packing List............................................................ 1
1.2 Product Description................................................ 1
1.3 Specifications......................................................... 3
1.4 Board Dimension.................................................... 5
C h a p t e r 2 Installation……………………………………………..5
2.1 Board Outline ......................................................... 6
2.2 Connectors & Jumpers Location .................... ........7
2.3 Connectors & Jumpers Summary........................... 9
2.4 Pin Assignments & Jumper Settings......................11
2.5 System Mapping................................................... 21
2.6 Watchdog Timer.....................................................24
2.7 GPIO......................................................................25
2.8 SPI Flash...............................................................26
C h a p t e r 3 Driver Installation……………………………………27
Appendix ………………………………………………………………..28
A. TFT Flat Panel Data Output ...................................... 28
B. TFT Flat Panel Support List....................................... 29
C. LVDS Flat Panel Support List.................................... 30
D. Flat Panel Hardware Setting ..................................... 31
E. Flat Panel Wiring and Lighting .................................. 32
F. TCP/IP library for DOS real mode.............................. 33
G. BIOS Default Setting................................................. 34
Warranty............................................................................................ 35
Vortex86SX-6154 Vortex86SX PC/104 CPU Module
1
C h a p t e r 1
Introduction
1.1 Packing List
Product Name Package
VSX-6154
Embedded Vortex86SX CPU All-in-One Board
Manual & Drivers CD x 1
RS232 cable x 4
PRINTER cable x1
IDE cable x 1
USB cable x 1 (USB port x 2)
VGA cable x 1
LAN cable x 1
GPIO cable x 1
PS/2 Mouse cable x 1
PS/2 Keyboard cable x 1
Screw Kit x 1
Vortex86SX-6154 Vortex86SX PC/104 CPU Module
2
1.2 Product Description
The VSX-6154 family of low-power x86 embedded controller is designed to meet PC/104
specification, and integrated with the following features.
300 MHz Vortex86SX System-On-Chip
VGA, TFT/LVDS LCD support up to
1280x1024 resolution
128MB DDR2 system memory
Enhanced IDE (UltraDMA-100/66/33)
10/100Mbps Ethernet
2 USB 2.0 (host)
Up to 4 serial ports
Parallel port
16-bit GPIOs
Onboard 2MB SPI Flash
PC/104-Plus expansion bus
Meet PC/104 stacking spec.
2 watchdog timer
3 PWM channels
JTAG interface
AMI BIOS
Single voltage +5V DC
Support extended operating
temperature range of -20°C to +70°C
The VSX-6154 PC/104 family of embedded controller is designed with backward compatibility in
mind, to provide migration path for projects facing end-of-life challenges with their existing x86
based PC/104 controller. The VSX-6154 family of controller is designed as a plug in
replacement, with backward compatibility to support legacy software to help extend existing
product life cycle without heavy re-engineering.
VSX-6154 is suitable for broad range of data-acquisition, Industrial automation, Process control,
Automotive controller, AVL, Intelligent Vehicle management devic,Medical device, Human
machine interface, Robotics, machinery control And more…application that required small
footprint, low-power and low-cost hardware with open industry standard such as PC/104.
剩余37页未读,继续阅读
weixin_38744153
- 粉丝: 346
- 资源: 2万+
上传资源 快速赚钱
- 我的内容管理 收起
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
会员权益专享
最新资源
- c++校园超市商品信息管理系统课程设计说明书(含源代码) (2).pdf
- 建筑供配电系统相关课件.pptx
- 企业管理规章制度及管理模式.doc
- vb打开摄像头.doc
- 云计算-可信计算中认证协议改进方案.pdf
- [详细完整版]单片机编程4.ppt
- c语言常用算法.pdf
- c++经典程序代码大全.pdf
- 单片机数字时钟资料.doc
- 11项目管理前沿1.0.pptx
- 基于ssm的“魅力”繁峙宣传网站的设计与实现论文.doc
- 智慧交通综合解决方案.pptx
- 建筑防潮设计-PowerPointPresentati.pptx
- SPC统计过程控制程序.pptx
- SPC统计方法基础知识.pptx
- MW全能培训汽轮机调节保安系统PPT教学课件.pptx
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功
评论0