没有合适的资源?快使用搜索试试~ 我知道了~
首页DDI0475G_corelink_nic400_network_interconnect_r1p0_trm.pdf
NIC 400的technical reference manual,corelink nic400是高度可配置,可以创建高性能,优化的,AMBA兼容的infrastructure。从AHB到AXI桥接器,最多可以接128个mater和64个slave。NIC400开发可以参考该文档。
资源详情
资源评论
资源推荐
Copyright © 2012-2016 ARM Limited or its affiliates. All rights reserved.
ARM DDI 0475G (ID042016)
ARM
®
CoreLink
™
NIC-400 Network
Interconnect
Revision: r1p0
Technical Reference Manual
ARM DDI 0475G Copyright © 2012-2016 ARM Limited or its affiliates. All rights reserved. ii
ID042016 Non-Confidential
ARM CoreLink NIC-400 Network Interconnect
Technical Reference Manual
Copyright © 2012-2016 ARM Limited or its affiliates. All rights reserved.
Release Information
The following changes have been made to this book.
Proprietary Notice
This document is protected by copyright and other related rights and the practice or implementation of the information
contained in this document may be protected by one or more patents or pending patent applications. No part of this
document may be reproduced in any form by any means without the express prior written permission of ARM. No
license, express or implied, by estoppel or otherwise to any intellectual property rights is granted by this
document unless specifically stated.
Your access to the information in this document is conditional upon your acceptance that you will not use or permit
others to use the information for the purposes of determining whether implementations infringe any third party patents.
THIS DOCUMENT IS PROVIDED “AS IS”. ARM PROVIDES NO REPRESENTATIONS AND NO
WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY, NON-INFRINGEMENT OR FITNESS
FOR A PARTICULAR PURPOSE WITH RESPECT TO THE DOCUMENT. For the avoidance of doubt, ARM makes
no representation with respect to, and has undertaken no analysis to identify or understand the scope and content of,
third party patents, copyrights, trade secrets, or other rights.
This document may include technical inaccuracies or typographical errors.
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL ARM BE LIABLE FOR ANY DAMAGES,
INCLUDING WITHOUT LIMITATION ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, OR
CONSEQUENTIAL DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY,
ARISING OUT OF ANY USE OF THIS DOCUMENT, EVEN IF ARM HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
This document consists solely of commercial items. You shall be responsible for ensuring that any use, duplication or
disclosure of this document complies fully with any relevant export laws and regulations to assure that this document
or any portion thereof is not exported, directly or indirectly, in violation of such export laws. Use of the word “partner”
in reference to ARM’s customers is not intended to create or refer to any partnership relationship with any other
company. ARM may make changes to this document at any time and without notice.
If any of the provisions contained in these terms conflict with any of the provisions of any signed written agreement
covering this document with ARM, then the signed written agreement prevails over and supersedes the conflicting
provisions of these terms.
Words and logos marked with ® or ™ are registered trademarks or trademarks of ARM Limited or its affiliates in the
EU and/or elsewhere. All rights reserved. Other brands and names mentioned in this document may be the trademarks
of their respective owners. Please follow ARM’s trademark usage guidelines at
http://www.arm.com/about/trademarks/guidelines/index.php
Copyright © 2012-2016 ARM Limited or its affiliates. All rights reserved.
Change history
Date Issue Confidentiality Change
07 August 2012 A Non-Confidential First release for r0p0
13 May 2013 B Non-Confidential First release for r0p1
09 December 2013 C Non-Confidential First release for r0p2
07 March 2014 D Non-Confidential First release for r0p3
30 September 2014 E Non-Confidential Second release for r0p3
10 December 2015 F Confidential First release for r1p0 Beta
04 March 2016 G Non-Confidential Second release for r1p0
ARM DDI 0475G Copyright © 2012-2016 ARM Limited or its affiliates. All rights reserved. iii
ID042016 Non-Confidential
ARM Limited. Company 02557590 registered in England.
110 Fulbourn Road, Cambridge, England CB1 9NJ.
LES-PRE-20349
Confidentiality Status
This document is Non-Confidential. The right to use, copy and disclose this document may be subject to license
restrictions in accordance with the terms of the agreement entered into by ARM and the party that ARM delivered this
document to.
Product Status
The information in this document is final, that is for a developed product.
Web Address
http://www.arm.com
ARM DDI 0475G Copyright © 2012-2016 ARM Limited or its affiliates. All rights reserved. iv
ID042016 Non-Confidential
Contents
ARM CoreLink NIC-400 Network Interconnect
Technical Reference Manual
Preface
About this book .......................................................................................................... vii
Feedback ..................................................................................................................... x
Chapter 1 Introduction
1.1 About the CoreLink NIC-400 Network Interconnect ................................................. 1-2
1.2 Key features ............................................................................................................. 1-3
1.3 IP Tooling ................................................................................................................. 1-5
1.4 Product revisions ..................................................................................................... 1-7
Chapter 2 Functional Description
2.1 About the functions .................................................................................................. 2-2
2.2 Interfaces ................................................................................................................. 2-3
2.3 Operation ............................................................................................................... 2-16
2.4 Optional features ................................................................................................... 2-32
Chapter 3 Programmers Model
3.1 About the programmers model ................................................................................ 3-2
3.2 Configuration programmers model .......................................................................... 3-3
Appendix A Signal Descriptions
A.1 Global signals .......................................................................................................... A-2
A.2 Signal direction ........................................................................................................ A-3
A.3 AXI3 and AXI4 signals ............................................................................................. A-4
A.4 APB signals ............................................................................................................. A-9
A.5 AHB-Lite signals .................................................................................................... A-10
剩余78页未读,继续阅读
茫茫大士
- 粉丝: 360
- 资源: 9
上传资源 快速赚钱
- 我的内容管理 收起
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
会员权益专享
最新资源
- ExcelVBA中的Range和Cells用法说明.pdf
- 基于单片机的电梯控制模型设计.doc
- 主成分分析和因子分析.pptx
- 共享笔记服务系统论文.doc
- 基于数据治理体系的数据中台实践分享.pptx
- 变压器的铭牌和额定值.pptx
- 计算机网络课程设计报告--用winsock设计Ping应用程序.doc
- 高电压技术课件:第03章 液体和固体介质的电气特性.pdf
- Oracle商务智能精华介绍.pptx
- 基于单片机的输液滴速控制系统设计文档.doc
- dw考试题 5套.pdf
- 学生档案管理系统详细设计说明书.doc
- 操作系统PPT课件.pptx
- 智慧路边停车管理系统方案.pptx
- 【企业内控系列】企业内部控制之人力资源管理控制(17页).doc
- 温度传感器分类与特点.pptx
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功
评论5