没有合适的资源?快使用搜索试试~ 我知道了~
首页u-boot 和 Linux 指南(英文版)(文件错误!)
资源详情
资源评论
资源推荐
The DENX U-Boot and Linux Guide (DULG)
for TQM8xxL
本文由富饶软件工作室(Flower Software Studio)收集
Table of contents:
1 Abstract
2 Introduction
2.1 Copyright
2.2 Disclaimer
2.3 Availability
2.4 Credits
2.5 Translations
2.6 Feedback
2.7 Conventions
3 Embedded Linux Development Kit
3.1 ELDK Availability
3.2 Supported Host Systems
3.3 Supported Target Architectures
3.4 Installation
3.4.1 Product Packaging
3.4.2 Downloading the ELDK
3.4.3 Initial Installation
3.4.4 Installation and Removal of Individual Packages
3.4.5 Removal of the Entire Installation
3.5 Working with ELDK
3.5.1 Switching Between Multiple Installations
3.6 Mounting Target Components via NFS
3.7 Rebuilding ELDK Components
3.7.1 ELDK Source Distribution
3.7.2 Rebuilding Target Packages
3.7.3 Rebuilding ELDT Packages
3.8 ELDK Packages
3.8.1 List of ELDT Packages
3.8.2 List of Target Packages
3.9 Rebuilding the ELDK from Scratch
3.9.1 ELDK Build Process Overview
3.9.2 Setting Up ELDK Build Environment
3.9.3 build.sh Usage
3.9.4 Format of the cpkgs.lst and tpkgs.lst Files
3.10 Notes for Solaris 2.x Host Environment
4 System Setup
4.1 Serial Console Access
4.2 4.2. Configuring the "cu" command
4.3 4.3. Configuring the "kermit" command
4.4 4.4. Using the "minicom" program
4.5 4.5. Permission Denied Problems
4.6 4.6. Configuration of a TFTP Server
4.7 4.7. Configuration of a BOOTP / DHCP Server
4.8 4.8. Configuring a NFS Server
5 Das U-Boot
5.1 Current Versions
5.2 Unpacking the Source Code
5.3 Configuration
5.4 Installation
5.4.1 Before You Begin
5.4.1.1 Installation Requirements
5.4.1.2 Board Identification Data
5.4.2 Installation Using a BDM/JTAG Debugger
5.4.3 Installation using U-Boot
5.4.4 Installation using Linux
5.4.5 Installation using firmware
5.4.5.1 Read Board ID and MAC Address
5.4.5.2 Test Download
5.4.5.3 Verify Download
5.4.5.4 Erase MON8xx Firmware
5.4.5.5 Load U-Boot
5.4.5.6 Verify Download
5.4.5.7 Recover Old MON8xx Firmware
5.4.5.8 Reset Board, and Re-Initialize
5.5 Tool Installation
5.6 Initialization
5.7 Initial Steps
5.8 The First Power-On
5.9 U-Boot Command Line Interface
5.9.1 Information Commands
5.9.1.1 bdinfo - print Board Info structure
5.9.1.2 coninfo - print console devices and informations
5.9.1.3 flinfo - print FLASH memory information
5.9.1.4 iminfo - print header information for application image
5.9.1.5 help - print online help
5.9.2 Memory Commands
5.9.2.1 base - print or set address offset
5.9.2.2 crc32 - checksum calculation
5.9.2.3 cmp - memory compare
5.9.2.4 cp - memory copy
5.9.2.5 md - memory display
5.9.2.6 mm - memory modify (auto-incrementing)
5.9.2.7 mtest - simple RAM test
5.9.2.8 mw - memory write (fill)
5.9.2.9 nm - memory modify (constant address)
5.9.2.10 loop - infinite loop on address range
5.9.3 Flash Memory Commands
5.9.3.1 cp - memory copy
5.9.3.2 flinfo - print FLASH memory information
5.9.3.3 erase - erase FLASH memory
5.9.3.4 protect - enable or disable FLASH write protection
5.9.3.5 mtdparts - define a Linux compatible MTD partition scheme
5.9.4 Execution Control Commands
5.9.4.1 autoscr - run script from memory
5.9.4.2 bootm - boot application image from memory
5.9.4.3 go - start application at address 'addr'
5.9.5 Download Commands
5.9.5.1 bootp - boot image via network using BOOTP/TFTP protocol
5.9.5.2 dhcp - invoke DHCP client to obtain IP/boot params
5.9.5.3 loadb - load binary file over serial line (kermit mode)
5.9.5.4 loads - load S-Record file over serial line
5.9.5.5 rarpboot- boot image via network using RARP/TFTP protocol
5.9.5.6 tftpboot- boot image via network using TFTP protocol
5.9.6 Environment Variables Commands
5.9.6.1 printenv- print environment variables
5.9.6.2 saveenv - save environment variables to persistent storage
5.9.6.3 setenv - set environment variables
5.9.6.4 run - run commands in an environment variable
5.9.6.5 bootd - boot default, i.e., run 'bootcmd'
5.9.7 Special Commands
5.9.7.1 i2c - I2C sub-system
5.9.7.2 ide - IDE sub-system
5.9.7.3 diskboot- boot from IDE device
5.9.8 Miscellaneous Commands
5.9.8.1 date - get/set/reset date & time
5.9.8.2 echo - echo args to console
5.9.8.3 reset - Perform RESET of the CPU
5.9.8.4 sleep - delay execution for some time
5.9.8.5 version - print monitor version
5.9.8.6 ? - alias for 'help'
5.10 U-Boot Environment Variables
5.11 U-Boot Scripting Capabilities
5.12 U-Boot Standalone Applications
5.12.1 "Hello World" Demo
5.12.2 Timer Demo
5.13 U-Boot Image Formats
5.14 U-Boot Advanced Features
5.14.1 Boot Count Limit
5.14.2 Bitmap Support
5.14.3 Splash Screen Support
6 Embedded Linux Configuration
6.1 Download and Unpack the Linux Kernel Sources
6.2 Kernel Configuration and Compilation
6.3 Installation
7 Booting Embedded Linux
7.1 Introduction
7.2 Passing Kernel Arguments
7.3 Boot Arguments Unleashed
7.4 Networked Operation with Root Filesystem over NFS
7.5 Boot from Flash Memory
7.6 Standalone Operation with Ramdisk Image
8 Building and Using Modules
9 Advanced Topics
9.1 Flash Filesystems
9.1.1 Memory Technology Devices
9.1.2 Journalling Flash File System
9.1.3 Second Version of JFFS
9.1.4 Compressed ROM Filesystem
剩余253页未读,继续阅读
hiflower
- 粉丝: 31
- 资源: 4
上传资源 快速赚钱
- 我的内容管理 收起
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
会员权益专享
最新资源
- ExcelVBA中的Range和Cells用法说明.pdf
- 基于单片机的电梯控制模型设计.doc
- 主成分分析和因子分析.pptx
- 共享笔记服务系统论文.doc
- 基于数据治理体系的数据中台实践分享.pptx
- 变压器的铭牌和额定值.pptx
- 计算机网络课程设计报告--用winsock设计Ping应用程序.doc
- 高电压技术课件:第03章 液体和固体介质的电气特性.pdf
- Oracle商务智能精华介绍.pptx
- 基于单片机的输液滴速控制系统设计文档.doc
- dw考试题 5套.pdf
- 学生档案管理系统详细设计说明书.doc
- 操作系统PPT课件.pptx
- 智慧路边停车管理系统方案.pptx
- 【企业内控系列】企业内部控制之人力资源管理控制(17页).doc
- 温度传感器分类与特点.pptx
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功
评论0