No. 2A586-261EN
Definition of terms
The terms used in this manual are defined below.
(1) Sample ID mode, rackdisk ID mode
TBA works in Sample ID mode when "Enable Sample Bar Code" is selected in the [Sample/Sample
Handler] settings on the [System Configuration] screen of the TBA. TBA works in Rack ID mode
when "Enable Sample Bar Code" is deselected in the [Sample/Sample Handler] settings on the
[System Configuration] screen of the TBA.Sample ID mode indicates the status in which "Sample ID"
is selected for [Query key] on the Database page of the [System Configuration] screen of the TBA.
Disk ID mode indicates the status in which "Disk ID" is selected for [Query key].
(2) Auto Return
"Auto Return" is a setting item on the [System Configuration] screen of the TBA.
If this is not selected, the TBA enters the Pause status as soon as it receives a rerun order. When
the pause status is released, the TBA sends an order inquiry and starts measurement. If "Auto
Return" is selected, the TBA does not enter the Pause status when it receives a rerun order. In this
case, therefore, the TBA sends an order inquiry immediately and starts measurement.
(2)(3) STAT sample
STAT sample represents a sample placed at the dedicated STAT (emergency) position and for
which an order is made through the [STAT] screen. STAT sample measurement can be performed
at any time by interrupting routine measurement.
(3)(4) Sample without barcode label
In sample ID mode, it is assumed that bar codes are applied to the samples. However, even if a bar
code cannot be applied to a sample, measurement can be performed by putting the sample on a
dedicated rack for samples without barcode labels.selecting "No Barcode" for the sample on the
Order Sample page of the [Database] screen. Such samples are referred to as "samples without
barcode labels". The dedicated rack is distinguished from the normal rack by the rack number. The
rack number for the samples without barcode labels is the number which is input to "No Bar Code
Sample's Top Rack ID" in the "Sample/Sample Handler" settings on the [System Configuration]
screen of the TBA or the number which is larger than the number input in "No Bar Code Sample's
Top Rack ID".
(4)(5) Internal mode, Internal/External mode, External mode
These modes show the sequence of querying or searching order. "Internal" means the database in
the TBA. "External" means the host computer. Mode is determined by the Protocol Type which is
selected in the [Online Configuration] screen. These modes are displayed on the "Query Sequence"
field on the [Online Configuration] screen of TBA as follows.
Mode : Description on the [Online Configuration] screen
----------------------------------------------------------------------------------------------
Internal mode : "Database"
Internal/External mode : "Database -> Host"
External mode : "Host"Internal mode is set when "Database" is selected for "Query
Sequence" on the [Online Configuration] screen of TBA. When "Database HOST" is selected, the
system is set to Internal/External mode. When "HOST" is selected, the system is set to External
mode.
4
我的内容管理
收起
我的收益 登录查看自己的收益
我的积分
登录查看自己的积分
我的C币
登录后查看C币余额
我的收藏 
我的下载 
下载帮助 
评论0