4
Description
The Agilent Technologies 14565B Device Characterization Software is an easy-
to-use graphical user interface for the Agilent 66300-series dc sources. With it,
you can:
Control output and measurement functions from a single window.
View output measurements on an oscilloscope-like display.
Copy, save, or print captured waveforms.
Recall saved waveforms for on-screen comparison with live waveforms.
Adjust horizontal and vertical markers to perform measurements on a
selected section of the waveform.
Operate in either simulation mode (no hardware required), or in instrument
control mode.
Long-term voltage and current data logging.
1
• Generate CCDF graphs of battery current drain.
1
1
Available on 66319B/D and 66321B/D dc sources with firmware version A.03.00 or later.
Firmware upgrade p/n = 5182-9091.Refer to the on-line help for firmware upgrade instructions.
NOTE: The Agilent 14565B Device Characterization Software does not control
instruments other than the supported Agilent dc sources. Drivers for
other GPIB instruments are not provided.
Automation Interface
The Agilent 14565B Automation Interface lets you automate, or control the
Agilent 14565B Device Characterization functions from another program. The
Agilent 14565B Automation Interface is supported by programming languages
or applications that can use COM components for communication.
The following programming environments are presently supported:
Agilent Wireless Test Manager (WTM).
Microsoft Excel.
National Instruments LabView.
Visual C++ using MFC.
Visual Basic 6.0
Visual C# .NET.
Visual Basic .NET
Visual Basic for Applications (VBA)
NOTE: Refer to the Agilent 14565B Automation Programming Guide for
complete information on using the Agilent 14565B Device
Characterization software within the listed programming environments.
评论0