没有合适的资源?快使用搜索试试~ 我知道了~
首页DX designer中文教程.pdf
资源详情
资源评论
资源推荐
Getting Started with DxDesigner
®
in the
Expedition
®
Enterprise Flow
Software Version EE 7.9.5
© 2007-2013 Mentor Graphics Corporation
All rights reserved.
This document contains information that is proprietary to Mentor Graphics Corporation. The original recipient of this
document may duplicate this document in whole or in part for internal business purposes only, provided that this entire
notice appears in all copies. In duplicating any part of this document, the recipient agrees to make every reasonable
effort to prevent the unauthorized use and distribution of the proprietary information.
This document is for information and instruction purposes. Mentor Graphics reserves the right to make
changes in specifications and other information contained in this publication without prior notice, and the
reader should, in all cases, consult Mentor Graphics to determine whether any changes have been
made.
The terms and conditions governing the sale and licensing of Mentor Graphics products are set forth in
written agreements between Mentor Graphics and its customers. No representation or other affirmation
of fact contained in this publication shall be deemed to be a warranty or give rise to any liability of Mentor
Graphics whatsoever.
MENTOR GRAPHICS MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
MENTOR GRAPHICS SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR
CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED TO LOST PROFITS)
ARISING OUT OF OR RELATED TO THIS PUBLICATION OR THE INFORMATION CONTAINED IN IT,
EVEN IF MENTOR GRAPHICS CORPORATION HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
RESTRICTED RIGHTS LEGEND 03/97
U.S. Government Restricted Rights. The SOFTWARE and documentation have been developed entirely
at private expense and are commercial computer software provided with restricted rights. Use,
duplication or disclosure by the U.S. Government or a U.S. Government subcontractor is subject to the
restrictions set forth in the license agreement provided with the software pursuant to DFARS 227.7202-
3(a) or as set forth in subparagraph (c)(1) and (2) of the Commercial Computer Software - Restricted
Rights clause at FAR 52.227-19, as applicable.
Contractor/manufacturer is:
Mentor Graphics Corporation
8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777.
Telephone: 503.685.7000
Toll-Free Telephone: 800.592.2210
Website: www.mentor.com
SupportNet: supportnet.mentor.com/
Send Feedback on Documentation: supportnet.mentor.com/doc_feedback_form
TRADEMARKS: The trademarks, logos and service marks ("Marks") used herein are the property of
Mentor Graphics Corporation or other third parties. No one is permitted to use these Marks without the
prior written consent of Mentor Graphics or the respective third-party owner. The use herein of a third-
party Mark is not an attempt to indicate Mentor Graphics as a source of a product, but is intended to
indicate a product from, or associated with, a particular third party. A current list of Mentor Graphics’
trademarks may be viewed at: www.mentor.com/trademarks.
第一章 设置设计数据
欢迎阅读 DxDesigner 初级应用指南。在该指导说明中,我们将通过一个简
单的设计引导用户使用 DxDesigner 的基本工具、熟悉整个基本流程。
在本章节中包括以下主题:
设计数据简介
检查现已存在的 DxWDIR 文件夹
拷贝 DxWDIR 中的 GS 数据到本地地址
设置 WDIR 和 DxGS 环境变量
除了本章的设置设计数据之外,整个指导说明分为以下几个主题:
设置 DxDesigner‐ 你要设置 DxDataBook 工作环境,创建一个新设计并设
置准备开始设计的 DxDesigner 案例
从 DxDataBook 放置器件设计原理图‐ 在 DxDesigner 中利用 DxDataBook
窗口放置器件设计原理图
设计导航和工具‐ 体验 DxDesigner 中的导航器,ICT 查看器,封装,规则
检查工具,快速连接性查查工具,料单输出工具,交叉标注工具和 PDF
输出工具
和 Expedition PCB 的接口‐ 将你的设计数据从 DxDesigner 端传送到
ExpeditionPCB 端,再反向标注会前端
添加设计规则‐ 在约束编辑系统(CES)中设置规则,传送这些规则到
ExpeditionPCB,并将布线信息传送回 CES 中
在 HyperlynxAnalog 中对设计进行仿真‐ 利用 HyperlynxAnalog 仿真整个
设计的某一部分
在该设计指导说明中, 我们假设你没有任何有关 DxDesigner 的经验,只是
熟悉原理图设计和布线环境。该指导说明以实际设计案例的流程设置组织架构。
首先,你需要设置 DxDesigner 环境,接下来绘制原理图,运行报告,进行仿真
并把设计数据传送到 Expedition PCB。在前面章节中创建的设计数据会用于后续
章节中继续进行设计。
前提条件:
Windows 类型的操作系统。目前情况下, 该指导说明不支持 UNIX 或者
Linux 操作系统
已经安装了 DxDesigner 和 DxDataBook
已经安装了 ExpeditionPCB
已经安装了约束编辑系统(CES)
已经安装了 HyperlynxAnalog
设计数据简介
本设计指导说明中所用的设计数据可以从 SupportNet 直接下载 DxGS.zip 文
件,也可以从本地 EE 安装路径
<path_to_install_target>\<release>\docs\data\DxWDIR.zip 中获得(例如:
C:\MentorGraphics\7.9.3EE\docs\data\DxWDIR.zip)。查看下图了解该压缩文件的
结构(注意:后文有关于解压文件存放何处的说明)
注意事项:
根据 Windows 系统有关文件查看的设置,该压缩文件的后缀.zip 可能显示,
也可能不显示。
下图 1‐1 虚线框中的项目只存在于从 SupportNet 直接下载的 DxGS.zip 文件中。
其他项目在 DxGS.zip 文件和 DxWDIR.zip 文件中都存在。
图 1‐1:DxGS.zip 文件结构
位于 DxWDIR 文件夹中的数据文件简要说明如下:
模版‐ 在路径 templates\DxDesigner\expedition\DxGS_template.prj 中有
个模版文件
DxGS‐ 包括一个简单设计案例的初始设计文件
DxGS_Sample‐ 包括在各个设计阶段完成的 DxGS 设计数据
DxConfig‐ 包括在某些主题中用的的附属文件
DxGS_Lib‐ 包括一个中心库
检查现已存在的 DxWDIR 文件夹
为防止数据丢失,你需要事先检查现已存在的 DxWDIR 文件夹。如果你现有
的本地 WDIR 环境变量指向一个名为 DxWDIR 的文件夹,并且你想把设计拷贝到
这个文件夹中,你需要事先备份整个文件夹。因为设计数据会覆盖现有的配置。
该初始设计除了需要设置你的 WDIR 环境变量指向提供的 DxWDIR 文件夹之外,
设计数据可以放置到任何地方。
注意事项:
如果你当前 WDIR 是设置到你的工作环境地址,你需要记录当前 WDIR 设置
以便于稍后能恢复到你原来的设置。
根据如下步骤检查当前 WDIR 环境变量:
1. 如果操作系统是 Windows XP,指向 1a 步骤然后跳过 1b。如果系统是
Windows7,只执行 1b 步骤。
a. 从 WindowsXP 系统开始菜单,选择 ControlPanel>System>Advanced
(tab)>EnvironmentVariables(button)访问环境变量对话框。
b. 从 Windows 7 系统开始菜单,选择 Control Panel > System
(link) >Advanced systemsettings(link) > Advanced(tab)>Environment
Variables(button)。
2. 在系统变量部分,定位 WDIR 环境变量项然后点击 Edit 按钮,出现对话框
EditSystemVariable。
3. 如果 WDIR 环境变量指向名为 DxWDIR 的文件夹,并且你想把设计拷贝到
这个文件夹中,你需要事先备份整个文件夹。
4. 退出环境变量和系统属性对话框。
备份现有的 DxWDIR 文件夹
如果你的本地 WDIR 环境变量指向名为 DxWDIR 的文件夹,并且你想把设计
拷贝到这个文件夹中,你才需要执行这个步骤。
1. 在开始之前,将你的本地 DxWDIR 文件夹中的所有配置文件备份到另外一
个地方
2. 完成本指导说明之后,用你所备份的自己的 DxWDIR 文件夹替换 DxWDIR
文件夹。
拷贝 DxWDIR 中的 GS 数据到本地
你可以从 SupportNet 下载设计数据,也可以从软件安装目录中获得设计数
据。你应该将整个 DxWDIR 文件夹拷贝到本地的可写路径中,例如以下主题中所
说的 C 盘。
从从 SupportNet 下载设计数据
从软件安装目录中获得设计数据
剩余93页未读,继续阅读
忆计
- 粉丝: 3
- 资源: 10
上传资源 快速赚钱
- 我的内容管理 收起
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
会员权益专享
最新资源
- RTL8188FU-Linux-v5.7.4.2-36687.20200602.tar(20765).gz
- c++校园超市商品信息管理系统课程设计说明书(含源代码) (2).pdf
- 建筑供配电系统相关课件.pptx
- 企业管理规章制度及管理模式.doc
- vb打开摄像头.doc
- 云计算-可信计算中认证协议改进方案.pdf
- [详细完整版]单片机编程4.ppt
- c语言常用算法.pdf
- c++经典程序代码大全.pdf
- 单片机数字时钟资料.doc
- 11项目管理前沿1.0.pptx
- 基于ssm的“魅力”繁峙宣传网站的设计与实现论文.doc
- 智慧交通综合解决方案.pptx
- 建筑防潮设计-PowerPointPresentati.pptx
- SPC统计过程控制程序.pptx
- SPC统计方法基础知识.pptx
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功
评论0