没有合适的资源?快使用搜索试试~ 我知道了~
首页dsPICDEM.PDF
dsPICDEM.PDF
需积分: 10 2 下载量 86 浏览量
更新于2023-03-16
评论
收藏 1.45MB PDF 举报
PIC官方步进电机驱动电路有运放MOS电路电流采样 这种的很难得而且肯定可靠稳定~~~~ 我们手头里有demo板已经测试绝对没问题·
资源详情
资源评论
资源推荐
© 2009 Microchip Technology Inc. DS70610A
dsPICDEM™ MCSM
Development Board
User’s Guide
DS70610A-page 2 © 2009 Microchip Technology Inc.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights.
Trademarks
The Microchip name and logo, the Microchip logo, dsPIC,
K
EELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART,
rfPIC and UNI/O are registered trademarks of Microchip
Technology Incorporated in the U.S.A. and other countries.
FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor,
MXDEV, MXLAB, SEEVAL and The Embedded Control
Solutions Company are registered trademarks of Microchip
Technology Incorporated in the U.S.A.
Analog-for-the-Digital Age, Application Maestro, CodeGuard,
dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN,
ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial
Programming, ICSP, Mindi, MiWi, MPASM, MPLAB Certified
logo, MPLIB, MPLINK, mTouch, Octopus, Omniscient Code
Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit,
PICtail, PIC
32
logo, REAL ICE, rfLAB, Select Mode, Total
Endurance, TSHARC, UniWinDriver, WiperLock and ZENA
are trademarks of Microchip Technology Incorporated in the
U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
All other trademarks mentioned herein are property of their
respective companies.
© 2009, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
Printed on recycled paper.
Note the following details of the code protection feature on Microchip devices:
• Microchip products meet the specification contained in their particular Microchip Data Sheet.
• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
• Microchip is willing to work with the customer who is concerned about the integrity of their code.
• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Microchip received ISO/TS-16949:2002 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC
®
MCUs and dsPIC
®
DSCs, KEELOQ
®
code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
dsPICDEM™ MCSM DEVELOPMENT
BOARD USER’S GUIDE
© 2009 Microchip Technology Inc. DS70610A-page 3
Table of Contents
Chapter 1. Introduction
1.1 Overview ...................................................................................................... 11
1.2 Features ....................................................................................................... 13
1.3 What’s Included ............................................................................................ 13
1.4 Reference Documents and Webinars .......................................................... 14
Chapter 2. Getting Started
2.1 Board Setup ................................................................................................. 15
2.2 Programming and Debugging Application Code .......................................... 16
Chapter 3. Hardware
3.1 Hardware Architecture .................................................................................. 17
3.2 PIM Configuration ......................................................................................... 20
3.3 Board Connectors ........................................................................................ 24
3.4 User Interface Hardware .............................................................................. 27
Chapter 4. Troubleshooting
4.1 Common Problems ....................................................................................... 29
Appendix A. Board Layout and Schematics
Appendix B. Electrical Specifications
dsPICDEM™ MCSM Development Board User’s Guide
DS70610A-page 4 © 2009 Microchip Technology Inc.
NOTES:
dsPICDEM™ MCSM DEVELOPMENT
BOARD USER’S GUIDE
© 2009 Microchip Technology Inc. DS70610A-page 5
Preface
INTRODUCTION
This preface contains general information that will be useful to know before using the
dsPICDEM™ Motor Control Stepper Motor (MCSM) Development Board. Topics
discussed in this preface include:
• Document Layout
• Conventions Used in this Guide
• Warranty Registration
• Recommended Reading
• The Microchip Web Site
• Development Systems Customer Change Notification Service
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This user’s guide describes how to use the dsPICDEM MCSM Development Board.
The document is organized as follows:
• Chapter 1. “Introduction” – This chapter introduces the dsPICDEM MCSM
Development Board and provides a brief overview of its features.
• Chapter 2. “Getting Started” – This chapter provides information on getting
started with the dsPICDEM MCSM Development Board.
• Chapter 3. “Hardware” – This chapter describes the hardware on the dsPICDEM
MCSM Development Board.
• Chapter 4. “Troubleshooting” – This chapter provides information for
troubleshooting problems encountered while using the dsPICDEM MCSM
Development Board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs and/
or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE on-line help.
Select the Help menu, and then Topics to open a list of available on-line help files.
剩余37页未读,继续阅读
Sampkia
- 粉丝: 36
- 资源: 34
上传资源 快速赚钱
- 我的内容管理 收起
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
会员权益专享
最新资源
- ExcelVBA中的Range和Cells用法说明.pdf
- 基于单片机的电梯控制模型设计.doc
- 主成分分析和因子分析.pptx
- 共享笔记服务系统论文.doc
- 基于数据治理体系的数据中台实践分享.pptx
- 变压器的铭牌和额定值.pptx
- 计算机网络课程设计报告--用winsock设计Ping应用程序.doc
- 高电压技术课件:第03章 液体和固体介质的电气特性.pdf
- Oracle商务智能精华介绍.pptx
- 基于单片机的输液滴速控制系统设计文档.doc
- dw考试题 5套.pdf
- 学生档案管理系统详细设计说明书.doc
- 操作系统PPT课件.pptx
- 智慧路边停车管理系统方案.pptx
- 【企业内控系列】企业内部控制之人力资源管理控制(17页).doc
- 温度传感器分类与特点.pptx
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功
评论0