没有合适的资源?快使用搜索试试~ 我知道了~
首页Adex meter AE1152D 说明书
Adex meter AE1152D 说明书
需积分: 50 21 下载量 184 浏览量
更新于2023-03-16
评论 2
收藏 331KB PDF 举报
Adex meter AE1152D英文 说明书,原产日本,电阻测试,带RS232接口,可编程
资源详情
资源评论
资源推荐
Model AE-1152D
DC LOW_OHM METER
Operation Manual
March. 21, 2012
Edition 4
This operation manual is subject to change for improvement without notice.
1
INTRODUCTION
Thank you very much for purchasing Model AE-1152D DC LOW_OHM METER.
The product you’ve purchased represents the excellent, reliable measuring instrument developed
through our superior technology gaining good nationwide popularity among purchaser-users.
The product has been manufactured through many inspections under severe quality controls to
offer satisfactory services after the delivery. This manual contains necessary references you may
need for satisfactory operation of the product.
Please take a few moments to read this manual carefully before starting with the actual operation
and keep this manual at hand always.
◆ Safety marks on products
Safety marks are provided on our products.
: This symbol means to be careful about operation.
: This symbol means the existence of dangers such as electric shocks.
2
CONTENTS
1. Outline . . . . . . . . . . . . . 3
2. Warranty . . . . . . . . . . . . . 3
3. Maintenance, Services . . . . . . . . . . 4
4. Attachments . . . . . . . . . . . . 4
5. Specifications . . . . . . . . . . 5
6. External View and Parts Names . . . . . . . 8
7. Explanation of Switches . . . . . . . . . 10
8. Setting Methods . . . . . . . . . . . 13
9. Measuring Method . . . . . . . . . . . 24
10. Calibration Method . . . . . . . . . . 29
11. Control Signal Connector . . . . . . . . . 32
12. Drive of the outside solenoid . . . . . . . . . 36
13. Time Chart (Usually operation) . . . . . . . 38
13. Time Chart (Shift operation) . . . . . . . . 40
3
1. Outline
The product is suitable to measure the super low resistance such as a shunt resistance from
0.000 mΩto 1500.0Ω, accordingly the highly accurate and steady measurement at high speed
can be performed by feeding max. DC 3A of measurement current.
Two types of measurement mode are provided, one is the absolute value measurement which
indicates the resistance as it is, and the measurement which indicates the deviation to the
objective resistance for measurement by setting the reference resistance in advance.
At the same time, the measured value is indicated in digital and the product indicates the
judgment of [HI][GO][LO] to the pre-set upper and lower limit values. Besides the determination
output of the external can be set up to the Shift mode. It is also possible to sound the buzzer
according to the setting.
For measurement, the product uses the four terminal method which is adequate to the low
resistance measurement, and our newly developed measurement system can perform the
measurement canceling the effect of thermoelectromotive force which may cause a problem in low
resistance measurement.
This product performs the sample measurement for the fixed times and then processes the
average value treatment to carry out the extremely stable measurement Since the contact
function is installed as a standard to check the measuring terminals’ contact state every time and
it allows you to judge bad contact of measuring jigs or the like.
In addition, GP-IB and RS-232C interfaces can be options so that it can remote-control various
setting data, measurement values and judgment results by remote control.
2. Warranty ( Applicable in Japan only )
AEMIC CORP warrants to the original consumer or other end-user purchaser that this product is
free from defects in materials or workmanship or damage due to accidents during the
transportation, or clear responsibilities of AEMIC CORP for a period of 2 years from the date of
purchase.
During the warranty period, and upon proof of purchase, the product will be repaired without
charge for either parts or labor.
This warranty shall not apply if the product is modified, tampered with, misused,
or subjected to abnormal working conditions.
4
3. Maintenance, Services
To obtain maintenance and service under this warranty, contact us and send the products to
AEMIC CORP from end-user purchaser.
4. Attachments
The first step is to unpack the contents of the package and verifying that all items are counted
for.
The following items should be included with the product you’ve purchased. If not, contact us.
・ Measurement cable . . . . . . . . . . . . . . . . . 1 set
・ Kelvin cable. . .. . . . . . . . . . . . . . . . 1 set
・ Power cable . . . . . . . . . . . . . . . . . . 1 pc
・Spare fuse( 1 A ) . . . . . . . . . . . . . . . . . 1 pc
・ Plug connector for control connector( 14 pins ) . . . . . . . . . 1 pc
・ Malfunction report sheet1 sheet . . . . . . . . . . . .. 1 sheet
・ Operation manual1 vol. . . . . . . . . . . . . . . . 1 sheet
剩余41页未读,继续阅读
an3399
- 粉丝: 2
- 资源: 1
上传资源 快速赚钱
- 我的内容管理 收起
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
会员权益专享
最新资源
- 27页智慧街道信息化建设综合解决方案.pptx
- 计算机二级Ms-Office选择题汇总.doc
- 单链表的插入和删除实验报告 (2).docx
- 单链表的插入和删除实验报告.pdf
- 物联网智能终端项目设备管理方案.pdf
- 如何打造品牌的模式.doc
- 样式控制与页面布局.pdf
- 武汉理工Java实验报告(二).docx
- 2021线上新品消费趋势报告.pdf
- 第3章 Matlab中的矩阵及其运算.docx
- 基于Web的人力资源管理系统的必要性和可行性.doc
- 基于一阶倒立摆的matlab仿真实验.doc
- 速运公司物流管理模式研究教材
- 大数据与管理.pptx
- 单片机课程设计之步进电机.doc
- 大数据与数据挖掘.pptx
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功
评论0