没有合适的资源?快使用搜索试试~ 我知道了~
首页RoCEv2和rdma标准文档
RoCEv2和rdma标准文档
5星 · 超过95%的资源 需积分: 46 151 下载量 77 浏览量
更新于2023-03-16
评论 8
收藏 573KB PDF 举报
RoCEv2和rdma标准文档 This document is an annex to Volume 1 release 1.2.1 of the InfiniBand Architecture, herein referred to as the base specification. This annex is Optional Normative, meaning that implementation of the feature described by this annex is Optional, but if present, the implementation must comply with the compliance statements contained within this annex. This specification follows the spirit of the RoCE Annex (Annex A16 to the base specification) in defining a new InfiniBand protocol variant that uses an IP network layer (with an IP header instead of InfiniBand‘s GRH) thus allowing IP routing of its packets.
资源详情
资源评论
资源推荐
Supplement to InfiniBand
TM
Architecture Specification
Volume 1 Release 1.2.1
Copyright © 2010 by InfiniBand
TM
Trade Association.
All rights reserved.
All trademarks and brands are the property of their respective owners.
This document contains information proprietary to the InfiniBand
TM
Trade Association. Use or disclosure without
written permission by an officer of the InfiniBand
TM
Trade Association is prohibited.
September 2, 2014
Annex A17:
RoCEv2
Table 0 Revision History
Revision Date
1.0 Sept. 2, 2014 General Release
InfiniBand
TM
Architecture Release 1.2.1 RoCEv2 (IP Routable RoCE) September 2, 2014
Volume 1 - General Specifications
InfiniBand
SM
Trade Association
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
LEGAL DISCLAIMER This specification provided “AS IS” and without any
warranty of any kind, including, without limitation,
any express or implied warranty of non-infringement,
merchantability or fitness for a particular purpose.
In no event shall IBTA or any member of IBT
A be liable
for any direct, indirect, special, exemplary, punitive,
or consequential damages, including, without limita-
tion, lost profits, even if advised of the possibility of
such damages.
InfiniBand
TM
Architecture RoCEv2 (IP Routable RoCE) September 2, 2014
V
OLUME 1 - GENERAL SPECIFICATIONS
InfiniBand
SM
Trade Association Page 1 Proprietary and Confidential
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
ANNEX A17: ROCEV2 (IP ROUTABLE ROCE)
A17.1 INTRODUCTION
This document is an annex to Volume 1 release 1.2.1 of the InfiniBand Ar-
chitecture, herein referred to as the base specification. This annex is Op-
tional Normative, meaning that implementation of the feature described by
this annex is Optional, but if present, the implementation must comply with
the compliance statements contained within this annex. This specification
follows the spirit of the RoCE Annex (Annex A16 to the base specification)
in defining a new InfiniBand protocol variant that uses an IP network layer
(with an IP header instead of InfiniBand‘s GRH) thus allowing IP routing
of its packets.
A17.2 OVERVIEW
A17.2.1 THE INFINIBAND ARCHITECTURE
The InfiniBand Architecture offers a rich set of I/O services based on an
RDMA access method and message passing semantics. Included are a
variety of transport services, reliable and unreliable, connected and un
-
connected, support for atomic operations, multicast and others.
InfiniBand defines a layered architecture that specifies the first four layers
of the OSI reference stack including the physical, link, network and trans
-
port layers as well as an accompanying management framework. In addi-
tion, the IB specification defines a software interface and its
accompanying verbs which are designed to allow smooth access to the
services provided by the InfiniBand Architecture.
A17.2.2 RDMA OVER CONVERGED ETHERNET (ROCE)
RDMA over Converged Ethernet (RoCE) is an InfiniBand Trade Associa-
tion Standard designed to provide InfiniBand Transport Services on
Ethernet Networks
4
. RoCE preserves the InfiniBand Verbs Semantics to-
gether with its Transport and Network Protocols and replaces the Infini-
Band Link and Physical Layers with those of Ethernet. The network
management infrastructure for RoCE is also that of Ethernet.
4. http://www.infinibandta.org/content/pages.php?pg=about_us_RoCE
InfiniBand
TM
Architecture RoCEv2 (IP Routable RoCE) September 2, 2014
V
OLUME 1 - GENERAL SPECIFICATIONS
InfiniBand
SM
Trade Association Page 2 Proprietary and Confidential
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
Figure 1 InfiniBand and RoCE Protocol Stacks
A17.2.3 THE NEED FOR (IP) ROUTABLE RDMA
RoCE packets are regular Ethernet frames
5
that carry an Ethertype
value
6
allocated by IEEE which indicates that the next header is a RoCE
GRH.
Figure 2 RoCE Packet Format
Since RoCE traffic doesn't carry an IP header, it can't be routed across the
boundaries of Ethernet L2 Subnets using regular IP routers. Under this
scheme, RoCE provides RDMA services for communication within an
Ethernet L2 domain.
5. Including VLANs and all other Ethernet header variations as defined by IEEE
802
6. 0x8915
InfiniBand
TM
Architecture RoCEv2 (IP Routable RoCE) September 2, 2014
V
OLUME 1 - GENERAL SPECIFICATIONS
InfiniBand
SM
Trade Association Page 3 Proprietary and Confidential
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
A17.2.4 ROCEV2 (IP ROUTABLE ROCE)
RoCEv2 is a straightforward extension of the RoCE protocol that involves
a simple modification of the RoCE packet format. Instead of the GRH,
RoCEv2 packets carry an IP header which allows traversal of IP L3
Routers and a UDP header that serves as a stateless encapsulation layer
for the RDMA Transport Protocol Packets over IP.
Figure 3 RoCEv2andRoCEFrameFormatDifferences
RoCEv2 packets use a well-known UDP Destination Port (dport) value
that unambiguously distinguishes them in a stateless manner.
As an additional benefit, following common practices in UDP encapsu-
lated protocols, the UDP Source Port (sport) field of RoCEv2 packets
serves as an
opaque flow identifier that can be used by the networking in-
frastructure for packet forwarding op
timizations - see Section 17.9.4,
“ECMP for RoCEv2,” on page 21.
Since this approach exclusively affects the packet format on the wire, and
due
to the fact that with RDMA semantics packets are generated and con-
sumed below the API, applications can operate over any form of RDMA
service (includin
g RoCEv2) in a completely transparent way
7
(see Figure
4).
7. WidespreadRDMAAPIsareIPbasedforallexistingRDMAtechnologies
剩余22页未读,继续阅读
weixin_42236405
- 粉丝: 2
- 资源: 8
上传资源 快速赚钱
- 我的内容管理 收起
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
会员权益专享
最新资源
- 2023年中国辣条食品行业创新及消费需求洞察报告.pptx
- 2023年半导体行业20强品牌.pptx
- 2023年全球电力行业评论.pptx
- 2023年全球网络安全现状-劳动力资源和网络运营的全球发展新态势.pptx
- 毕业设计-基于单片机的液体密度检测系统设计.doc
- 家用清扫机器人设计.doc
- 基于VB+数据库SQL的教师信息管理系统设计与实现 计算机专业设计范文模板参考资料.pdf
- 官塘驿林场林防火(资源监管)“空天地人”四位一体监测系统方案.doc
- 基于专利语义表征的技术预见方法及其应用.docx
- 浅谈电子商务的现状及发展趋势学习总结.doc
- 基于单片机的智能仓库温湿度控制系统 (2).pdf
- 基于SSM框架知识产权管理系统 (2).pdf
- 9年终工作总结新年计划PPT模板.pptx
- Hytera海能达CH04L01 说明书.pdf
- 数据中心运维操作标准及流程.pdf
- 报告模板 -成本分析与报告培训之三.pptx
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功
评论3