SIZE
(mm
2
)
B CA
0.05
0.02
0.08
0.1
1
2
OK OK
0.2
0.3
0.5
0.7
1.0
1.5
2.0
2.5
3.0
CONTRAST
STANDARD
1 Inspection methods (condition)
1.1 Light source 500Lux~700Lux
1.2 Viewing Distance: 30cm
1.3 Part Rotation Angle During inspection
- Vertical rotation angle 30° to 75°/Horizontal Rotation Angle: 30° left/right
1.4 Viewing time (to be confirmed/updated for production)
- Front and back surfaces: 4 to 5 seconds/Each side: 1-2 seconds
2 Cosmetic
• Defect Size: - 0.08mm Square - allow 1 defect / 0.05mm Square - allow 2 distance must be greater than 30mm
• Defect Types: Scratch, Molded Internal Contamination, Black Dot/Line, Air Hole, Pit, Dent, Crack, Particle.
• Unless specified in cosmetic part drawing, use 25% contrast standard for accept/reject for visible hairline scratch (<0.01mm depth), knit
line, gate blush and stress whitening.
• Parts with surface contamination can NOT be cleaned if reject. Clean with soft cotton and water only, NO Isopropyl Alcohol or solvent can
be used on cosmetic surfaces, except 99% ethyl alcohol on surfaces approved by Apple Engineering.
A) 10mm (min) distance request if one black spot and one other color point.
B) 30mm (min) distance request if two black spots or two hair scratch line.
C) Regarding (A) & (B) need to meet Template class A and for each side (surface).
DEFECT SHAPE
03/28/07
Rev 04
SCALE
0 10 20 30 40 50 (mm)
A+
NG
2
1
评论0