没有合适的资源？快使用搜索试试~ 我知道了~

首页"Veritas Access 3350 Appliance Hardware Installation Guide"

"Veritas Access 3350 Appliance Hardware Installation Guide"

需积分: 5 0 下载量 201 浏览量更新于2023-11-24 收藏 12.23MB PDF 举报

《Veritas Access 3350 Appliance Hardware Installation Guide》是一份由Veritas Technologies LLC发布的硬件安装指南，最新更新日期为2022年5月31日。该文件受版权法保护，Veritas、Veritas Logo和NetBackup为Veritas Technologies LLC或其关联公司在美国和其他国家的商标或注册商标。该产品可能包含Veritas需要向第三方提供归属声明的第三方软件（“Third-party Programs”），部分Third-party Programs可在开源或自由软件许可下使用。软件搭配的许可协议不会改变您在这些开源或自由软件许可下的任何权利或义务。

5U84 storage shelf Expansion module

Each Expansion storage shelf contains two I/O modules. The modules are labeled

A and B, from left to right as you look at the rear panel of a shelf. Each module has

three SAS-3 ports that are labeled A, B, and C from left to right.

A yellow label states that port B is for attachment to a server only. You cannot use

this port without permission and assistance from Veritas Technical Support.

The SAS-3 ports connect to the SAS port on each RAID controller on the Primary

shelf and to other Expansion shelves.

SAS3 ports

Ethernet

port

B C

Cables and connectors

Compute nodes connect to each other with 1G Ethernet cables.

The Primary Storage Shelf connects to Expansion Storage Shelf I/O modules with

SAS-3 cables.

Expansion Storage Shelves connect to each other with SAS-3 cables.

The power connector that attaches to a storage shelf has a right-angled form factor.

A security tie assures continued connection between the power cable and the

storage shelf.

16Overview

5U84 storage shelf Expansion module

Pre-installation

requirements

This chapter includes the following topics:

■ Customer-provided environment and supplies

■ Storage shelf shipping container contents

■ Compute node shipping container contents

■ Dimensions and determining rack locations

■ Best practices for rack installation

■ Heat dissipation guidelines

■ Cable length verification

■ Prerequisites for IPMI configuration

Customer-provided environment and supplies

The storage shelf rails can extend from 713mm (28.07in) to 884mm (33.23in) in

length. Be sure that your racks accommodate these rails.

For best ventilation, the rack cabinet:

■ Should be at least 100 cm (4 feet) from walls

■ Should be at least 100 cm (4 feet) from other cabinets on the front and back of

the compute node and the storage shelves

The following list describes the necessary personnel and equipment that are needed

at the installation site:

Chapter

■ At least one person or a mechanical lift to move the compute node.

■ Three people or a mechanical lift to move each storage shelf.

■ A magnetic Philips-head screw driver to install the storage shelf rails into the

rack.

■ A screwdriver with a 2mm Hex bit to secure the bezels to the front of each

storage shelf drawer.

■ Cables to connect the compute node to your corporate network.

■ A USB-keyboard and a monitor to connect to the compute node.

■ A 19-inch rack with dual Power Distribution Units (PDUs) with 120VAC or

220VAC power input for the compute node.

■ A 19-inch rack with dual Power Distribution Units (PDUs) with 220VAC power

input for the storage shelves.

Refer to the following section for more details.

See “Heat dissipation guidelines” on page 24.

Storage shelf shipping container contents

Each storage shelf container includes other boxes and contents as follows.

■ Open Me First envelope, containing:

■ Deployment plan that provides basic information and links to detailed

information

■ Cable straps

■ Envelope, containing;

■ Warranty agreement

■ Environmental compliance statement

■ Hardware cable connections poster

■ Rack templates

■ Rack rails and mounting hardware

■ Two SAS-3 cables with each Expansion shelf

■ Two power cords

■ One bezel and four 2mm Hex screws for each drawer

The disk drives ship separately from the storage shelves. Each disk drive shipping

container includes 42 disk drive slots.

18Pre-installation requirements

Storage shelf shipping container contents

Each Access 3350 storage disk drive box includes one carrier with a blank. In the

top drawer this blank carrier is inserted into slot 41. In the bottom drawer this blank

carrier is inserted into slot 83.

After you have installed the storage shelves into a rack, you should install the disk

drives into the drawer.

Compute node shipping container contents

Each compute node and each storage shelf is shipped in separate containers. Each

container includes other boxes and contents. The disk drives are installed into the

compute node at the factory.

The following items ship within the compute node box.

Open Me First envelope, containing:

■ Deployment plan that provides basic information and links to detailed information

■ Cable straps

Envelope containing:

■ Warranty agreement

■ Environmental compliance statement

■ USB drive with factory image

Hardware such as:

■ Hardware cable connections poster

■ Rack templates

■ Rack rails and mounting hardware

■ Four SAS-3 cables

■ Two power cords

■ Bezel

Dimensions and determining rack locations

Physical specifications for the compute node include the following.

■ Each node is two rack units (2RU) high.

■ Node measurements are listed below.

■ Height: 21.97cm (8.65")

19Pre-installation requirements

Compute node shipping container contents

■ Width: 48.26cm (19")

■ Length/depth: 79.38cm (31.25")

■ The compute node rails are extensible to 813mm (32in). This distance is the

maximum depth that is allowed between rack posts.

Physical specifications for the 5U84 storage shelves include the following.

■ Each storage shelf is 5RU high.

■ Storage shelf measurements are listed below.

■ Height: 22.23cm (8.75")

■ Width: 48.26cm (19")

■ Length/depth: 93.35cm (36.75") from the rear of the front flanges to the

extreme rear of the storage shelf chassis.

Note: The 5U84 storage shelf is longer than a standard IEC-compliant rack.

Be sure that your rack cabinet and Power Distribution Units accommodate

the length of the storage shelves.

■ The storage shelf rails measure 71.3cm to 88.4cm (28" to 34.8") in length. Be

sure that your rack accommodates this distance from the inside of the front post

to the inside of the rear post. Plan for additional space to accommodate power

strips, power cords, and other cables.

When you plan the installation be sure to allocate enough space for all of the

hardware.

A typical installation has the storage shelves on the bottom and the compute node(s)

at the top.

20Pre-installation requirements

Dimensions and determining rack locations

剩余142页未读，继续阅读

weixin_40191861_zj

粉丝: 83
资源: 1万+

上传资源快速赚钱

我的内容管理展开

我的资源快来上传第一个资源

我的收益

登录查看自己的收益

我的积分登录查看自己的积分

我的C币登录后查看C币余额

我的收藏

我的下载

下载帮助

"Veritas Access 3350 Appliance Hardware Installation Guide"

Veritas Access 3350 Appliance Product Description.pdf

Veritas Access 3340 Appliance Hardware Installation Guide.pdf

Veritas 5340 Appliance Hardware Installation Guide.pdf

Veritas 5350 Appliance Hardware Installation Guide.pdf

Veritas 5250 Appliance Hardware Installation Guide.pdf

Veritas 5150 Appliance Hardware Installation Guide.pdf

NetBackup 5230 Appliance Hardware Installation Guide.pdf

NetBackup 5330 Appliance Hardware Installation Guide.pdf

NetBackup 5240 Appliance Hardware Installation Guide.pdf

NetBackup 5340 Appliance Hardware Installation Guide.pdf

最新资源