没有合适的资源?快使用搜索试试~ 我知道了~
首页5G-SA通信测试标准规范v16.5.0解读
5G-SA通信测试标准规范v16.5.0解读
1.该资源内容由用户上传,如若侵权请联系客服进行举报
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
版权申诉
5星 · 超过95%的资源 2 下载量 60 浏览量
更新于2024-07-19
收藏 5.72MB PDF 举报
"5G-SA通信测试参考标准ts_13852101v160500p.pdf" 是一份由欧洲电信标准协会(ETSI)发布的技术规范文档,全称为"3GPP TS 38.521-1 version 16.5.0 Release 16",它详细规定了5G NR (New Radio) 用户设备(UE)的射频传输和接收的符合性测试标准,特别关注5G独立组网(SA)模式下的范围1测试。
这份文档是5G通信系统的一个关键组成部分,对于确保设备在5G网络中的兼容性和性能至关重要。其中涉及的知识点主要包括:
1. **5G NR**: 5G NR是第五代移动通信的新空口技术,用于提高数据速率、降低延迟、增强连接密度等,以满足未来物联网、自动驾驶等应用场景的需求。NR采用了更宽的带宽、更灵活的帧结构以及更先进的编码技术。
2. **独立组网(SA)模式**: 与非独立组网(NSA)不同,5G SA模式不依赖现有的4G LTE基础设施,而是构建了一个全新的5G核心网,提供更纯粹的5G体验,包括超高速、低延迟等特性。
3. **用户设备(UE)符合性测试**: UE需通过一系列严格测试以确保其符合3GPP标准,包括射频性能、协议一致性、功能和性能测试等。这些测试确保UE在实际网络环境中能正确工作并与其他设备兼容。
4. **射频传输与接收**: 该文档详细规定了UE在5G频段内的发射和接收要求,包括功率控制、频率误差、调制精度、误码率等参数,这些参数直接影响到通信质量和覆盖范围。
5. **Release 16**: 这是3GPP的一个重要版本,包含了对5G标准的进一步增强,比如引入了URLLC(超高可靠性低延迟通信)、mMTC(大规模机器类型通信)等新特性,以及针对工业互联网和物联网的优化。
6. **测试规范**: ETSI的这份文档提供了测试方法和流程,用于验证UE是否符合3GPP Release 16中定义的5G标准,这对于设备制造商、运营商和认证机构进行产品开发和认证至关重要。
7. **关键词**: 文档列出的关键词“5G”和“ETSI”表明这是与5G技术和ETSI组织相关的内容。ETSI是欧洲标准化组织,负责制定通信技术的全球标准。
这份文档对于理解5G NR UE的射频性能要求和测试流程具有极高的参考价值,是设备制造商、测试实验室和监管机构的重要参考资料。它详细规定了测试条件、测试方法和判定准则,有助于推动5G设备的合规开发和市场部署。
ETSI
ETSI TS 138 521
-
1 V16.5.0 (2020
-
12)
15
3GPP TS 38
.521
-
1 version 16.5.0 Release 16
6.5D.4.5 Test requirement ................................................................................................................................. 590
7 Receiver characteristics ........................................................................................................................ 591
7.1 General ........................................................................................................................................................... 591
7.1A General ........................................................................................................................................................... 592
7.2 Diversity characteristics ................................................................................................................................. 592
7.3 Reference sensitivity ...................................................................................................................................... 592
7.3.1 General ...................................................................................................................................................... 592
7.3.2 Reference sensitivity power level ............................................................................................................. 592
7.3.2.1 Test purpose ........................................................................................................................................ 592
7.3.2.2 Test applicability ................................................................................................................................. 592
7.3.2.3 Minimum conformance requirements ................................................................................................. 592
7.3.2.4 Test description ................................................................................................................................... 598
7.3.2.4.1 Initial conditions ............................................................................................................................ 598
7.3.2.4.2 Test procedure ............................................................................................................................... 603
7.3.2.4.3 Message contents ........................................................................................................................... 603
7.3.2.5 Test requirement ................................................................................................................................. 604
7.3.3
Δ
RIB,c ...................................................................................................................................................... 611
7.3A Reference sensitivity for CA .......................................................................................................................... 612
7.3A.0 Minimum conformance requirements ....................................................................................................... 612
7.3A.0.1 General ................................................................................................................................................ 612
7.3A.0.2 Reference sensitivity power level for CA ........................................................................................... 612
7.3A.0.2.1 Reference sensitivity power level for Intra-band contiguous CA .................................................. 612
7.3A.0.2.2 Reference sensitivity power level for Intra-band non-contiguous CA ........................................... 612
7.3A.0.2.3 Reference sensitivity power level for Inter-band CA .................................................................... 613
7.3A.0.2.4 Reference sensitivity power level for SDL bands.......................................................................... 613
7.3A.0.3
Δ
R
IB,c
for CA ....................................................................................................................................... 615
7.3A.0.3.1 General .......................................................................................................................................... 615
7.3A.0.3.2
Δ
R
IB,c
for Inter-band CA ................................................................................................................ 615
7.3A.0.4 Reference sensitivity exceptions due to UL harmonic interference for CA ........................................ 617
7.3A.0.5 Reference sensitivity exceptions due to intermodulation interference due to 2UL CA ...................... 620
7.3A.0.6 Reference sensitivity exceptions due to cross band isolation for CA .................................................. 621
7.3A.1 Reference sensitivity power level for 2DL CA ......................................................................................... 622
7.3A.1.1 Test purpose ........................................................................................................................................ 622
7.3A.1.2 Test applicability ................................................................................................................................. 622
7.3A.1.3 Minimum requirements ....................................................................................................................... 622
7.3A.1.4 Test description ................................................................................................................................... 622
7.3A.1.4.2 Test procedure ............................................................................................................................... 626
7.3A.1.5 Test requirement ................................................................................................................................. 627
7.3A.1_1 Reference sensitivity power level for 2DL CA exceptions ....................................................................... 630
7.3A.1_1.1 Test purpose ........................................................................................................................................ 630
7.3A.1_1.2 Test applicability ................................................................................................................................. 630
7.3A.1_1.3 Minimum requirements ....................................................................................................................... 630
7.3A.1_1.4 Test description ................................................................................................................................... 630
7.3A.1_1.4.2 Test procedure ............................................................................................................................... 633
7.3A.1_1.5 Test requirement ................................................................................................................................. 634
7.3A.2 Reference sensitivity power level for 3DL CA ......................................................................................... 636
7.3A.2.1 Test purpose ........................................................................................................................................ 636
7.3A.2.2 Test applicability ................................................................................................................................. 636
7.3A.2.3 Minimum requirements ....................................................................................................................... 636
7.3A.2.4 Test description ................................................................................................................................... 636
7.3A.2.4.2 Test procedure ............................................................................................................................... 640
7.3A.2.5 Test requirement ................................................................................................................................. 640
7.3A.3 Reference sensitivity power level for 4DL CA ......................................................................................... 642
7.3A.4 Reference sensitivity power level for 5DL CA ......................................................................................... 643
7.3B Void ................................................................................................................................................................ 643
7.3C Reference sensitivity for SUL ........................................................................................................................ 643
7.3C.0 Minimum conformance requirements ....................................................................................................... 643
7.3C.0.1 General ................................................................................................................................................ 643
7.3C.0.2 Minimum conformance requirements for Reference sensitivity power level ...................................... 643
7.3C.0.3
Δ
RIB,c for SUL .................................................................................................................................. 646
7.3C.1 General ...................................................................................................................................................... 647
ETSI
ETSI TS 138 521
-
1 V16.5.0 (2020
-
12)
16
3GPP TS 38.521
-
1 version 16.5.0 Release 16
7.3C.2 Reference sensitivity power level for SUL ............................................................................................... 647
7.3C.2.1 Test purpose ........................................................................................................................................ 647
7.3C.2.2 Test applicability ................................................................................................................................. 647
7.3C.2.3 Minimum conformance requirement ................................................................................................... 648
7.3C.2.4 Test description ................................................................................................................................... 648
7.3C.2.5 Test requirement ................................................................................................................................. 649
7.3D Reference sensitivity for UL MIMO .............................................................................................................. 651
7.3D.1 General ...................................................................................................................................................... 651
7.3D.2 Reference sensitivity power level for UL MIMO ..................................................................................... 651
7.3D.2.1 Test purpose ........................................................................................................................................ 651
7.3D.2.2 Test applicability ................................................................................................................................. 652
7.3D.2.3 Minimum conformance requirements ................................................................................................. 652
7.3D.2.4 Test description ................................................................................................................................... 652
7.3D.2.4.1 Initial conditions ............................................................................................................................ 652
7.3D.2.4.2 Test procedure ............................................................................................................................... 653
7.3D.2.4.3 Message contents ........................................................................................................................... 653
7.3D.2.5 Test requirement ................................................................................................................................. 653
7.4 Maximum input level ..................................................................................................................................... 653
7.4.1 Test purpose .............................................................................................................................................. 653
7.4.2 Test applicability ...................................................................................................................................... 653
7.4.3 Minimum conformance requirements ....................................................................................................... 654
7.4.4 Test description ......................................................................................................................................... 654
7.4.4.1 Initial conditions ................................................................................................................................. 654
7.4.4.2 Test procedure ..................................................................................................................................... 655
7.4.4.3 Message contents ................................................................................................................................ 656
7.4.5 Test requirement ....................................................................................................................................... 656
7.4A Maximum input level for CA ......................................................................................................................... 657
7.4A.0 Minimum conformance requirements ....................................................................................................... 657
7.4A.0.1 Maximum input level for Intra-band contiguous CA .......................................................................... 657
7.4A.0.2 Maximum input level for Intra-band non-contiguous CA ................................................................... 657
7.4A.0.3 Maximum input level for Inter-band CA ............................................................................................ 658
7.4A.1 Maximum input level for CA (2DL CA) .................................................................................................. 658
7.4A.1.1 Test purpose ........................................................................................................................................ 658
7.4A.1.2 Test applicability ................................................................................................................................. 658
7.4A.1.3 Minimum conformance requirements ................................................................................................. 658
7.4A.1.4 Test description ................................................................................................................................... 658
7.4A.1.5 Test requirement ................................................................................................................................. 661
7.4A.2 Maximum input level for CA (3DL CA) .................................................................................................. 663
7.4A.2.1 Test purpose ........................................................................................................................................ 663
7.4A.2.2 Test applicability ................................................................................................................................. 663
7.4A.2.3 Minimum conformance requirements ................................................................................................. 663
7.4A.2.4 Test description ................................................................................................................................... 663
7.4A.2.4.1 Initial conditions ............................................................................................................................ 663
7.4A.2.4.2 Test procedure ............................................................................................................................... 665
7.4A.2.4.3 Message contents ........................................................................................................................... 667
7.4A.2.5 Test requirement ................................................................................................................................. 667
7.4D Maximum input level for UL MIMO ............................................................................................................. 669
7.4D.1 Test purpose .............................................................................................................................................. 669
7.4D.2 Test applicability ...................................................................................................................................... 669
7.4D.3 Minimum conformance requirements ....................................................................................................... 669
7.4D.4 Test description ......................................................................................................................................... 669
7.4D.4.1 Initial conditions ................................................................................................................................. 669
7.4D.4.2 Test procedure ..................................................................................................................................... 670
7.4D.4.3 Message contents ................................................................................................................................ 671
7.4D.5 Test requirement ....................................................................................................................................... 671
7.5 Adjacent channel selectivity ........................................................................................................................... 672
7.5.1 Test purpose .............................................................................................................................................. 672
7.5.2 Test applicability ...................................................................................................................................... 673
7.5.3 Minimum conformance requirements ....................................................................................................... 673
7.5.4 Test description ......................................................................................................................................... 678
7.5.4.1 Initial conditions ................................................................................................................................. 678
7.5.4.2 Test procedure ..................................................................................................................................... 679
ETSI
ETSI TS 138 521
-
1 V16.5.0 (2020
-
12)
17
3GPP TS 38.521
-
1 version 16.5.0 Release 16
7.5.4.3 Message contents ................................................................................................................................ 680
7.5.5 Test requirement ....................................................................................................................................... 681
7.5A Adjacent channel selectivity for CA ............................................................................................................... 688
7.5A.0 Minimum conformance requirements ....................................................................................................... 688
7.5A.0.1 Adjacent channel selectivity for Intra-band contiguous CA ............................................................... 688
7.5A.0.2 Adjacent channel selectivity Intra-band non-contiguous CA .............................................................. 691
7.5A.0.3 Adjacent channel selectivity Inter-band CA ....................................................................................... 691
7.5A.1 Adjacent channel selectivity for 2DL CA ................................................................................................. 691
7.5A.1.1 Test Purpose ........................................................................................................................................ 691
7.5A.1.2 Test Applicability ................................................................................................................................ 692
7.5A.1.3 Minimum Conformance Requirements ............................................................................................... 692
7.5A.1.4 Test Description .................................................................................................................................. 692
7.5A.1.4.1 Initial Conditions ........................................................................................................................... 692
7.5A.1.4.2 Test Procedure ............................................................................................................................... 694
7.5A.1.4.3 Message Contents .......................................................................................................................... 697
7.5A.1.5 Test Requirement ................................................................................................................................ 697
7.5A.2 Adjacent channel selectivity for 3DL CA ................................................................................................. 713
7.5A.2.1 Test Purpose ........................................................................................................................................ 713
7.5A.2.2 Test Applicability ................................................................................................................................ 714
7.5A.2.3 Minimum Conformance Requirements ............................................................................................... 714
7.5A.2.4 Test Description .................................................................................................................................. 714
7.5A.2.4.1 Initial Conditions ........................................................................................................................... 714
7.5A.2.4.2 Test Procedure ............................................................................................................................... 716
7.5A.2.4.3 Message Contents .......................................................................................................................... 719
7.5A.2.5 Test Requirement ................................................................................................................................ 719
7.5A.3 Adjacent channel selectivity for 4DL CA ................................................................................................. 728
7.5A.3.1 Test Purpose ........................................................................................................................................ 729
7.5A.3.2 Test Applicability ................................................................................................................................ 729
7.5A.3.3 Minimum Conformance Requirements ............................................................................................... 729
7.5A.3.4 Test Description .................................................................................................................................. 729
7.5A.3.4.1 Initial Conditions ........................................................................................................................... 729
7.5A.3.4.2 Test Procedure ............................................................................................................................... 729
7.5A.3.4.3 Message Contents .......................................................................................................................... 730
7.5A.3.5 Test Requirement ................................................................................................................................ 730
7.5D Adjacent channel selectivity for UL MIMO ................................................................................................... 731
7.5D.1 Test purpose .............................................................................................................................................. 731
7.5D.2 Test applicability ...................................................................................................................................... 731
7.5D.3 Minimum conformance requirements ....................................................................................................... 731
7.5D.4 Test description ......................................................................................................................................... 732
7.5D.4.1 Initial conditions ................................................................................................................................. 732
7.5D.4.2 Test procedure ..................................................................................................................................... 733
7.5D.4.3 Message contents ................................................................................................................................ 733
7.5D.5 Test requirement ....................................................................................................................................... 733
7.6 Blocking characteristics ................................................................................................................................. 733
7.6.1 General ...................................................................................................................................................... 733
7.6.2 Inband Blocking ........................................................................................................................................ 733
7.6.2.1 Test purpose ........................................................................................................................................ 733
7.6.2.2 Test applicability ................................................................................................................................. 734
7.6.2.3 Minimum conformance requirements ................................................................................................. 734
7.6.2.4 Test description ................................................................................................................................... 738
7.6.2.4.1 Initial conditions ............................................................................................................................ 738
7.6.2.4.2 Test procedure ............................................................................................................................... 739
7.6.2.4.3 Message contents ........................................................................................................................... 740
7.6.2.5 Test requirement ................................................................................................................................. 740
7.6.3 Out-of-band blocking ................................................................................................................................ 744
7.6.3.1 Test Purpose ........................................................................................................................................ 744
7.6.3.2 Test Applicability ................................................................................................................................ 744
7.6.3.3 Minimum Conformance Requirements ............................................................................................... 744
7.6.3.4 Test Description .................................................................................................................................. 749
7.6.3.4.1 Initial Conditions ........................................................................................................................... 749
7.6.3.4.2 Test Procedure ............................................................................................................................... 750
7.6.3.4.3 Message Contents .......................................................................................................................... 750
ETSI
ETSI TS 138 521
-
1 V16.5.0 (2020
-
12)
18
3GPP TS 38.521
-
1 version 16.5.0 Release 16
7.6.3.5 Test Requirement ................................................................................................................................ 750
7.6.4 Narrow band blocking .............................................................................................................................. 755
7.6.4.1 Test Purpose ........................................................................................................................................ 755
7.6.4.2 Test Applicability ................................................................................................................................ 755
7.6.4.3 Minimum Conformance Requirements ............................................................................................... 755
7.6.4.4 Test Description .................................................................................................................................. 757
7.6.4.4.1 Initial Conditions ........................................................................................................................... 757
7.6.4.4.2 Test Procedure ............................................................................................................................... 758
7.6.4.4.3 Message Contents .......................................................................................................................... 758
7.6.4.5 Test Requirement ................................................................................................................................ 758
7.6A Blocking characteristics for CA ..................................................................................................................... 760
7.6A.1 General ...................................................................................................................................................... 760
7.6A.2 Inband blocking for CA ............................................................................................................................ 760
7.6A.2.0 Minimum requirements ....................................................................................................................... 760
7.6A.2.0.1 In-band blocking for Intra-band contiguous CA ............................................................................ 760
7.6A.2.0.2 In-band blocking for Intra-band non-contiguous CA .................................................................... 762
7.6A.2.0.3 In-band blocking for Inter-band CA .............................................................................................. 762
7.6A.2.1 In-band Blocking for CA (2DL CA) ................................................................................................... 763
7.6A.2.2 In-band Blocking for CA (3DL CA) ................................................................................................... 775
7.6A.2.2.1 Test purpose .................................................................................................................................. 775
7.6A.2.2.2 Test applicability ........................................................................................................................... 775
7.6A.2.2.3 Minimum conformance requirements ............................................................................................ 776
7.6A.2.2.4 Test description ............................................................................................................................. 776
7.6A.2.2.5 Test requirement ............................................................................................................................ 781
7.6A.3 Out-of-band blocking for CA.................................................................................................................... 787
7.6A.3.0 Minimum conformance requirements ................................................................................................. 787
7.6A.3.0.1 Out-of-band blocking for Intra-band contiguous CA .................................................................... 787
7.6A.3.0.2 Out-of-band blocking for Intra-band non-contiguous CA ............................................................. 789
7.6A.3.0.3 Out-of-band blocking for Inter-band CA ....................................................................................... 789
7.6A.3.1 Out-of-band blocking for CA (2DL CA) ............................................................................................ 790
7.6A.3.2 Out-of-band blocking for CA (3DL CA) ............................................................................................ 800
7.6A.3.3 Out-of-band blocking for CA (4DL CA) ............................................................................................ 810
7.6A.4 Narrow band blocking for CA .................................................................................................................. 817
7.6A.4.0 Minimum conformance requirements ................................................................................................. 817
7.6A.4.0.1 Narrow band blocking for Intra-band contiguous CA ................................................................... 817
7.6A.4.0.2 Narrow band blocking for Intra-band non-contiguous CA ............................................................ 818
7.6A.4.0.3 Narrow band blocking for Inter-band CA...................................................................................... 818
7.6A.4.1 Narrow band blocking for CA (2DL CA) ........................................................................................... 819
7.6A.4.2 Narrow band blocking for CA (3DL CA) ........................................................................................... 824
7.6A.4.3 Narrow band blocking for CA (4DL CA) ........................................................................................... 828
7.6C Blocking characteristics for SUL ................................................................................................................... 832
7.6C.1 General ...................................................................................................................................................... 832
7.6C.2 Inband Blocking for SUL ......................................................................................................................... 832
7.6C.2.1 Test purpose ........................................................................................................................................ 832
7.6C.2.2 Test applicability ................................................................................................................................. 832
7.6C.2.3 Minimum conformance requirements ................................................................................................. 832
7.6C.2.4 Test description ................................................................................................................................... 832
7.6C.2.5 Test requirement ................................................................................................................................. 834
7.6C.3 Out-of-band blocking for SUL.................................................................................................................. 834
7.6C.3.1 Test Purpose ........................................................................................................................................ 834
7.6C.3.2 Test applicability ................................................................................................................................. 834
7.6C.3.3 Minimum conformance requirements ................................................................................................. 834
7.6C.3.4 Test description ................................................................................................................................... 835
7.6C.3.5 Test Requirement ................................................................................................................................ 836
7.6D Blocking characteristics for UL MIMO ......................................................................................................... 837
7.6D.1 General ...................................................................................................................................................... 837
7.6D.2 Inband blocking for UL MIMO ................................................................................................................ 837
7.6D.2.1 Test purpose ........................................................................................................................................ 837
7.6D.2.2 Test applicability ................................................................................................................................. 837
7.6D.2.3 Minimum conformance requirements ................................................................................................. 837
7.6D.2.4 Test description ................................................................................................................................... 838
7.6D.2.4.1 Initial conditions ............................................................................................................................ 838
ETSI
ETSI TS 138 521
-
1 V16.5.0 (2020
-
12)
19
3GPP TS 38.521
-
1 version 16.5.0 Release 16
7.6D.2.4.2 Test procedure ............................................................................................................................... 839
7.6D.2.4.3 Message contents ........................................................................................................................... 839
7.6D.2.5 Test requirement ................................................................................................................................. 839
7.6D.3 Out-of-band blocking for UL MIMO........................................................................................................ 839
7.6D.3.1 Test purpose ........................................................................................................................................ 839
7.6D.3.2 Test applicability ................................................................................................................................. 839
7.6D.3.3 Minimum conformance requirements ................................................................................................. 839
7.6D.3.4 Test description ................................................................................................................................... 840
7.6D.3.4.1 Initial conditions ............................................................................................................................ 840
7.6D.3.4.2 Test procedure ............................................................................................................................... 841
7.6D.3.4.3 Message contents ........................................................................................................................... 841
7.6D.3.5 Test requirement ................................................................................................................................. 841
7.6D.4 Narrow band blocking for UL MIMO ...................................................................................................... 841
7.6D.4.1 Test purpose ........................................................................................................................................ 841
7.6D.4.2 Test applicability ................................................................................................................................. 841
7.6D.4.3 Minimum conformance requirements ................................................................................................. 841
7.6D.4.4 Test description ................................................................................................................................... 842
7.6D.4.4.1 Initial conditions ............................................................................................................................ 842
7.6D.4.4.2 Test procedure ............................................................................................................................... 843
7.6D.4.4.3 Message contents ........................................................................................................................... 843
7.6D.4.5 Test requirement ................................................................................................................................. 843
7.7 Spurious response ........................................................................................................................................... 843
7.7.1 Test Purpose.............................................................................................................................................. 843
7.7.2 Test Applicability ..................................................................................................................................... 843
7.7.3 Minimum Conformance Requirements ..................................................................................................... 843
7.7.4 Test Description ........................................................................................................................................ 845
7.7.4.1 Initial Conditions ................................................................................................................................. 845
7.7.4.2 Test Procedure ..................................................................................................................................... 845
7.7.4.3 Message Contents ............................................................................................................................... 846
7.7.5 Test Requirement ...................................................................................................................................... 846
7.7A Spurious response for CA ............................................................................................................................... 847
7.7A.0 Minimum conformance requirements ....................................................................................................... 847
7.7A.0.1 Minimum conformance requirements for intra-band contiguous CA ................................................. 847
7.7A.0.2 Void..................................................................................................................................................... 848
7.7A.0.3 Minimum conformance requirements for inter-band CA .................................................................... 848
7.7A.0.4 Minimum conformance requirements for intra-band non-contiguous CA .......................................... 848
7.7A.1 Spurious response for 2DL CA ................................................................................................................. 849
7.7A.1.1 Test Purpose ........................................................................................................................................ 849
7.7A.1.2 Test Applicability ................................................................................................................................ 849
7.7A.1.3 Minimum Conformance Requirements ............................................................................................... 849
7.7A.1.4 Test Description .................................................................................................................................. 849
7.7A.1.4.1 Initial Conditions ........................................................................................................................... 849
7.7A.1.4.2 Test Procedure ............................................................................................................................... 849
7.7A.1.4.3 Message Contents .......................................................................................................................... 850
7.7A.1.5 Test Requirement ................................................................................................................................ 850
7.7A.2 Spurious response for 3DL CA ................................................................................................................. 851
7.7A.2.1 Test Purpose ........................................................................................................................................ 851
7.7A.2.2 Test Applicability ................................................................................................................................ 851
7.7A.2.3 Minimum Conformance Requirements ............................................................................................... 851
7.7A.2.4 Test Description .................................................................................................................................. 851
7.7A.2.4.1 Initial Conditions ........................................................................................................................... 851
7.7A.2.4.2 Test Procedure ............................................................................................................................... 851
7.7A.2.4.3 Message Contents .......................................................................................................................... 852
7.7A.2.5 Test Requirement ................................................................................................................................ 852
7.7A.3 Spurious response for 4DL CA ................................................................................................................. 852
7.7A.3.1 Test Purpose ........................................................................................................................................ 852
7.7A.3.2 Test Applicability ................................................................................................................................ 852
7.7A.3.3 Minimum Conformance Requirements ............................................................................................... 853
7.7A.3.4 Test Description .................................................................................................................................. 853
7.7A.3.4.1 Initial Conditions ........................................................................................................................... 853
7.7A.3.4.2 Test Procedure ............................................................................................................................... 853
7.7A.3.4.3 Message Contents .......................................................................................................................... 853
剩余1040页未读,继续阅读
130 浏览量
199 浏览量
144 浏览量
130 浏览量
123 浏览量
105 浏览量
8507 浏览量
2021-07-26 上传
爱学习的man
- 粉丝: 542
- 资源: 83
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- 易语言学习-扩展功能支持库一 (3.0#0版)逆向源代码.zip
- 【游戏开发】 phthon导出excel成lua表(可单独,可批量enter直接批量) exporExcelConfig.zip
- intro-to-programming-exercises
- Packt.Matplotlib.3.0.Cookbook.rar 2018年最新版本,epub格式,高清附图,文字可拷贝
- 添加sql server数据库分区.zip
- 简易波形发生器,51出品-电路方案
- jquerycsv:需要创建或解析CSV的东西所以使这个
- django-sqlalchemy:目前仅基于SQLalchemy核心1.42.0构建的Django ORM,用于将SQLAlchemy与Django 3.1+ PostgreSQL 12.1无缝集成
- gardenmuseumleicandrut.github.io:地点
- oldfiel.rar
- 易语言学习-Sqlite3支持库 - 公开测试版 [2012-5-2].zip
- NumHits-开源
- vcredist_x64_2020.zip
- django-text:使用Django的人类直观文本编辑
- 适用于Python的灵活而强大的数据分析/操作库,提供与R data.frame对象,统计函数等类似的标记数据结构-Python开发
- building+applications+with+spring5+and+vuejs2.rar
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功