Oracle ODA_X5-2 安装指南（E48314-06，2016年版）

需积分: 10 135 浏览量更新于2024-07-16 收藏 11.27MB PDF 举报

Oracle X5-2一体机安装指南 Oracle Server X5-2是一款专为高性能数据库应用设计的第四代Oracle数据库一体机。这份文档（PartNo:E48314-06，发布日期为2016年3月）提供了详细的安装步骤、配置指导以及系统特性介绍，旨在帮助用户快速理解和部署这款高效的一体化解决方案。该指南的核心内容涵盖了以下关键知识点： 1. **产品概述**：文档首先介绍了X5-2的特点，它集成了Oracle数据库、操作系统和管理工具，旨在简化数据库环境的管理和性能优化。其设计目标是提升数据库性能，降低运维复杂性，并支持大数据和云计算环境。 2. **系统组件**：文档详述了X5-2的主要硬件构成，包括处理器、内存、存储设备以及网络架构，这些都是确保高性能和稳定性的基础。 3. **安装过程**：指南详细阐述了安装步骤，包括硬件准备、软件加载、数据库配置、网络设置和安全性设置等，以确保用户能够顺利进行系统部署。 4. **许可证与法律条款**：在开始使用前，用户需注意Oracle的版权声明和许可协议，强调了软件的使用限制和保密性要求，以及对逆向工程和解密的禁止。 5. **技术支持与错误报告**：文档强调了遇到问题时的反馈渠道，鼓励用户在发现错误时以书面形式报告，以便Oracle及时更新和改进产品。 6. **适用范围与政府用户**：特别指出，如果此软件或文档被提供给美国政府或由政府代表授权使用，那么包含了关于政府用户特性的相关通知，可能涉及特殊的安全和合规要求。 7. **变更和保障**：由于技术的快速发展，文档中的信息可能随时更新，且不保证无误。用户应定期查阅最新的文档以获取最新支持。 Oracle Server X5-2安装指南是一份实用的工具，为IT专业人员提供了安装、管理和维护Oracle数据库一体机的关键指导，是确保高效数据库运营和满足法规遵从性的关键参考资料。

Space Requirements

16 Oracle Server X5-2 Installation Guide • March 2016

TABLE 1

Oracle Server X5-2 Physical Specifications

Dimension Server Specification Measurements

Width Server chassis 43.65 cm (17.19 inches)

Depth Maximum overall 73.7 cm (29 inches)

Height 1-rack unit (1U) nominal 4.26 cm (1.68 inches)

Weight Fully populated server 18 kg (40 lbs)

Related Information

■

“Space Requirements” on page 16

■

“Rack Requirements” on page 38

Space Requirements

The Oracle Server X5-2 is a 1 rack unit (1U) server. For physical dimensions, see “Server

Physical Specifications” on page 15.

The server can be installed into a four-post rack cabinet that conforms to ANSI/EIA 310-D-

1992 or IEC 60927 standards, such as Oracle's Sun Rack II. All Oracle racks have the same

space requirements. The specifications for Oracle's Sun Rack II are listed in the following table.

TABLE 2

Sun Rack II Models 1242 and 1042 Specifications

Requirement Specification

Usable rack units 42

Height 199.8 cm (78.66 inches)

Width (with side panels) 60 cm (23.62 inches)

Depth Model 1242

†

Depth Model 1042

†

120 cm (47.24 inches)

105.8 cm (41.66 inches)

Weight Model 1242

Weight Model 1042

150.6 kg (332 lbs)

123.4 kg (272 lbs)

Maximum dynamic load 1005 kg (2215 lbs)

†

Depth is measured from front door handle to rear door handle.

The minimum ceiling height for the cabinet is 230 cm (90 inches), measured from the true floor

or raised floor, whichever is higher. An additional 91.4 cm (36 inches) is for top clearance. The

space above the cabinet and its surroundings must not restrict the movement of cool air between

the air conditioner and the cabinet, or the movement of hot air coming out of the top of the

cabinet.

The following sections provide additional space requirements:

Electrical Power Requirements

18 Oracle Server X5-2 Installation Guide • March 2016

Note - The power dissipation numbers listed in the following table are the maximum rated

power numbers for the power supply used in the system. The numbers are not a rating of

the actual power consumption of the system. For up-to-date information about the power

consumption, go to Oracle's Sun Power Calculators web site and click on the Oracle

Server X5-2 link: http://www.oracle.com/us/products/servers-storage/sun-power-

calculators/index.html

TABLE 5

Power Supply Specifications

Parameter Specification

Voltage (nominal) 100 to 127 VAC; 200 to 240 VAC

Input current (maximum) 7.2 A @ 100-127 VAC; 3.4 A @ 200-240 VAC

Frequency (nominal) 50/60 Hz (47 to 63 Hz range)

The Oracle Server X5-2 can operate effectively over a range of voltages and frequencies.

However, it must have a reliable power source. Damage to the server might occur if the ranges

are exceeded. Electrical disturbances such as the following might damage the system:

■

Fluctuations caused by brownouts

■

Wide and rapid variations in input voltage levels or in input power frequency

■

Electrical storms

■

Faults in the distribution system, such as defective wiring

To protect your server from such disturbances, you should have a dedicated power distribution

system, power-conditioning equipment, as well as lightning arresters or power cables to protect

from electrical storms.

See the following sections for additional power specifications.

■

“Facility Power Guidelines” on page 18

■

“Circuit Breaker and UPS Guidelines” on page 19

■

“Grounding Guidelines” on page 19

Facility Power Guidelines

Electrical work and installations must comply with applicable local, state, or national electrical

codes. Contact your facilities manager or qualified electrician to determine what type of power

is supplied to the building.

Design the input power sources to ensure adequate power is provided to the power distribution

units (PDUs). Use dedicated AC breaker panels for all power circuits that supply power to the

PDU. When planning for power distribution requirements, balance the power load between

available AC supply branch circuits. In the United States and Canada, ensure that the overall

Environmental Requirements

Preparing for Server Installation 19

system AC input current load does not exceed 80 percent of the branch circuit AC current

rating.

For example, PDU power cords for the Oracle's Sun Rack II are 4 meters (13.12 feet) long,

and 1 to 1.5 meters (3.3 to 4.9 feet) of the cord might be routed within the rack cabinet. The

installation site AC power receptacle must be within 2 meters (6.6 feet) of the rack.

Circuit Breaker and UPS Guidelines

The design of your power system must ensure that adequate power is provided to the server.

Use dedicated AC breaker panels for all power circuits that supply power to the server.

Electrical work and installations must comply with applicable local, state, or national electrical

codes. The server requires electrical circuits to be grounded to the Earth.

Note - Circuit breakers are supplied by the customer. One circuit breaker is required for each

server power cord.

In addition to circuit breakers, provide a stable power source, such as an uninterruptable

power supply (UPS) to reduce the possibility of component failures. If computer equipment is

subjected to repeated power interruptions and fluctuations, then it is susceptible to a higher rate

of component failure.

Grounding Guidelines

The rack must use grounding-type power cords. For example, Oracle's Sun Rack II has three-

wire, grounding-type power cords. Always connect the cords to grounded power outlets.

Because different grounding methods are used, depending on location, check the grounding

type, and refer to documentation, such as local electrical codes, for the correct grounding

method. Ensure that the facility administrator or qualified electrical engineer who verifies the

grounding method for the building performs the grounding work.

Environmental Requirements

The following table lists the temperature, humidity, and altitude specifications, as well as

acoustic noise, vibration, and shock specifications.

TABLE 6

Environmental Specifications

Specification Operating Nonoperating

Ambient temperature (Does

not apply to removable media)

■ Maximum range: 41°F to 95°F (5°C to 35°C) up to 2,953

feet (900 meters)

–40°F to 154°F (–40°C to 68°C)

Environmental Requirements

20 Oracle Server X5-2 Installation Guide • March 2016

Specification Operating Nonoperating

■ Optimal: 69.8°F to 73.4°F (21°C to 23°C)

Note - Maximum ambient operating temperature is derated by

1 degree C per 300 meters of elevation beyond 900 meters, up

to a maximum altitude of 3,000 meters.

Relative humidity ■ 10% to 90% noncondensing, short term 23°F to 113°F (–

5°C to 55°C)

■ 5% to 90% noncondensing, but not to exceed 0.024 kg of

water per kg of dry air (0.053 lbs water/2.205 lbs dry air)

Up to 93% noncondensing 95°F (35°C)

maximum wet bulb

Altitude Up to 9,840 feet (3,000 meters)

Note - In China markets, regulations may limit installations to

a maximum altitude of 6,562 feet (2,000 meters).

Maximum 39,370 feet (12,000 meters)

Acoustic noise ■ Maximum condition: 7.1 Bels A weighted

■ Idle condition: 7.0 Bels A weighted

Not applicable

Vibration 0.15 G (z-axis),

0.10 G (x-, y-axes), 5-500Hz swept sine

IEC 60068-2-6 Test FC

0.5 G (z-axis),

0.25 G (x-, y-axes), 5-500Hz swept sine

IEC 60068-2-6 Test FC

Shock 3.5 Gs, 11 ms half-sine

IEC 60068-2-27 Test Ea

Roll-off: 1.25-inch roll-off free fall,

front to back rolling directions

Threshold: 13-mm threshold height at

0.65 m/s impact velocity

ETE-1010-02 Rev A

Set conditions to the optimal temperature and humidity ranges to minimize the chance of

downtime due to component failure. Operating the Oracle Server X5-2 for extended periods at

or near the operating range limits, or installing it in an environment when it remains at or near

nonoperating range limits could significantly increase hardware component failure. See also:

■

“Temperature Guidelines” on page 20

■

“Humidity Guidelines” on page 21

Related Information

■

“Ventilation and Cooling” on page 21

Temperature Guidelines

An ambient temperature range of 21° to 23° Celsius (70° to 74° Fahrenheit) is optimal for

server reliability and operator comfort. Most computer equipment can operate in a wide

temperature range, but near 22° Celsius (72° Fahrenheit) is desirable because it is easier to

maintain safe humidity levels. Operating in this temperature range provides a safety buffer in

the event that the air conditioning system goes down for a period of time.

剩余171页未读，继续阅读

whutabs

粉丝: 0
资源: 12

Oracle ODA_X5-2 安装指南（E48314-06，2016年版）

mosaic-X5 GNSS模块资料

MSP430x5xxMSP430x6xx Family.pdf

科技行业先锋系列16：微软发布Hololens2，助推混合现实-20190228-中信证券-11页.pdf

MDK-ProgrammersGuide.rar_5.06_MDK开发包_Movidius_Movidius MDK_ma215

MSP430x5xx Family User's Guide (Rev. F).pdf

MT7628_ProgrammingGuide_20140428(E2).pdf

MT7620_ProgrammingGuide_E1_20120522.pdf

2.4 GHz （EFR32） Matching Guide 射频调试例子.pdf

Vehicle Occupancy Detection User's Guide_1_23_translate.pdf

MSP430串口编程和调试技巧1.0.pdf

最新资源