IFD9506 Ethernet转换器：MODBUS TCP通讯与安装指南

需积分: 9 61 浏览量更新于2024-09-07 收藏 951KB PDF 举报

"IFD9506工业通讯模块是台达公司的一款以太网转换器，主要用于实现MODBUS TCP通信协议的转换。该模块支持8组MODBUS TCP客户端和16组MODBUS TCP服务器，能够处理多样化的网络通信需求。此外，它具备IP过滤功能，可以限制可访问的IP地址，增强网络安全。IFD9506的设计允许网络传输速度达到100Mbps，确保高速数据交换。内置的3个外部数字输入点可在检测到特定情况时触发警报，通过电子邮件发送通知，提高系统响应能力。为了确保稳定性，模块还提供了数据缓存和串行通信失败重传功能，同时，IFD9506实现了通信和电源的全隔离设计，防止因电磁干扰或电源问题导致的通信不稳定。" 安装与安全注意事项: 在进行IFD9506的安装和接线工作时，务必遵循以下安全指南： 1. 在接线前，请务必关闭电源。在电源开启的情况下接触端子可能会导致电击。 2. IFD9506是一款开放式设备，应当安装在防尘、防湿、防电击和防振的封闭式机柜内。机柜应设计为非维护人员无法轻易操作设备，以防止不恰当的操作造成设备损坏或危险。 3. 安装时可能需要使用钥匙或特定工具打开机柜，确保只有授权人员能接触到设备。功能特性: 1. MODBUS TCP支持：IFD9506支持标准的MODBUS TCP通信协议，可以作为客户端和服务器，适用于多种自动化设备间的通信。 2. IP过滤：8组IP过滤功能，可设置特定IP地址的访问权限，提高系统安全性。 3. 高速网络：最大传输速率达到100Mbps，满足高速数据传输需求。 4. 外部数字输入：3个外部数字输入点，可触发警报功能，例如在检测到异常情况时发送电子邮件报警。 5. 数据缓存与重传：模块内置数据缓存，当串行通信失败时，能够自动重传，确保数据完整性和通信可靠性。 6. 全隔离设计：通信与电源隔离，增强设备抗干扰能力，保证通信的稳定性和设备的使用寿命。总结： IFD9506工业通讯模块是一款高性能、高稳定性的以太网转换器，适用于工业环境中的MODBUS TCP通信。其丰富的功能、安全特性以及对网络速度和稳定性的重视，使其成为自动化系统集成中的理想选择。在安装和使用过程中，用户应注意安全操作，以确保设备正常运行和人员安全。

2012-04-20

2-EM

Warning

 This instruction sheet only provides introductory information on electrical specification, installation and wiring.

 Switch off the power before wiring. DO NOT touch any terminal when the power is switched on.

 IFD9506 is an OPEN-TYPE device and therefore should be installed in an enclosure free of airborne dust, humidity,

electric shock and vibration. The enclosure should prevent non-maintenance staff from operating the device (e.g. key

or specific tools are required to open the enclosure) in case danger and damage on the device may occur.

 Introduction

 Features

Thanks for using the Delta industrial network converter. IFD9506 is the Ethernet converter. It supports the

protocol of the standard MODBUS TCP (eight sets of MODBUS TCP clients and sixteen sets of MODBUS TCP

servers). It supports eight sets of IP filters which filtering the accessible IP address. The network speed can be

up to 100 Mbps, and three external digital input points which can trigger the alarm to send the email is built in

IFD9506. Besides, IFD9506 is equipped with the cache and the function of resending the serial communication

which fails. The communication and the power supply are isolated from each other. Users can enjoy

high-speed Ethernet and high stability at the same time.

 Product Profile & Outline

Communication ports: RS-485,

Ethernet, RS-232

Power indicator

Address switch

Data format/baud rate switch

Digit display

RS-485 indicator, Reset button,

Ethernet indicator

Module name

RS-485 connector, digital input points,

power input point, earth point

DIN rail connector

 Specifications

 Ethernet Interface

Connector RJ-45 with Auto MDI/MDIX

Transmission cable Category 5e, 100m (Max)

Transmission speed 10/100 Mbps Auto-Detection

Network protocol ICMP, IP, TCP, UDP, DHCP, SMTP, MODBUS TCP, Delta Configuration

 RS-485 Interface

Connector RJ-11

Transmission cable Telecom Cable, 1200 m (Max)

Transmission speed

110, 150, 300, 600, 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600,

115,200 bps

ENGLISH

Communication format Stop bit: 1,2 Parity bit: None, Odd, Even Data bit: 7,8 ASCII/RTU

Communication protocol MODBUS, User Define

 RS-232 Interface

Connector Mini DIN

Transmission cable DVPACAB215 / DVPACAB230 / DVPACAB2A30

Transmission speed

110, 150, 300, 600, 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600,

115,200 bps

Communication format Stop bit: 1,2 Parity bit: None, Odd, Even Data bit: 7,8 ASCII/RTU

Communication protocol MODBUS, Delta Configuration, User Define

 Terminal Block

Connector Feed-through terminal 10PIN

Transmission cable Twisted pair

Transmission speed

110, 150, 300, 600, 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600,

115,200 bps

Communication format Stop bit: 1,2 Parity bit: None, Odd, Even Data bit: 7,8 ASCII/RTU

Communication protocol MODBUS, User Define

 Electrical Specifications

Power voltage 24V DC (-15% ~ 20%) supplied by feed-through terminal

Power consumption 3W

Insulation voltage 500V

Weight 140g

 Environment

Noise immunity

ESD (IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge

EFT (IEC 61131-2, IEC 61000-4-4): Power Line:±1KV,

Communication I/O: ±0.5KV

RS (IEC 61131-2, IEC 61000-4-3): 80MHz ~ 1GHz, 10V/m. 1.4GHz ~ 2.0GHz, 10V/m

CS (IEC61131-2, IEC 61000-4-6): 150KHz ~ 80MHz, 3V/m

Surge (Biwave IEC61132-2, IEC61000-4-5):

Power line 0.5KV DM, Ethernet 0.5KV CM, RS-485 0.5KV CM

Operation/storage

Operation: 0ºC ~ 55ºC (temperature), 50 ~ 95% (humidity), pollution degree 2

Storage: -25ºC ~ 70ºC (temperature), 5 ~ 95% (humidity)

Vibration/shock

immunity

International standards: IEC61131-2, IEC68-2-6 (TEST Fc)/IEC61131-2 & IEC

68-2-27(TEST Ea)

Certificates

 Installation

 Dimension

Unit: mm

 Station Address Setting

Switch setting Content

01 … F7 Valid MODBUS station address

 Data Format Switch

Switch setting Format

0 7-N-1 8 7-N-2

1 8-N-1 9 8-N-2

2 7-O-1

A 7-O-2

3 8-O-1

B 8-O-2

6 7-E-1

E 7-E-2

7 8-E-1 F 8-E-2

 Baud Rate Switch

Switch setting Baud rate (bps)

1 110

7 4,800

2 150

8 9,600

3 300

9 19,200

4 600

A 38,400

5 1,200

B 57,600

6 2,400

C 115,200

 RJ-11 PIN Definition

PIN Signal Definition PIN Signal Definition

1 -- N/C

4 D- Negative pole for data

2 -- N/C

5 GND Ground

3 D+ Positive pole for data

6 -- N/C

 RJ-45 PIN Definition

PIN Signal Definition PIN Signal Definition

1 Tx+

Positive pole for data

transmission

5 -- N/C

2 Tx-

Negative pole for data

transmission

6 Rx-

Negative pole for data

receiving

3 Rx+

Positive pole for data

receiving

7 -- N/C

4 -- N/C 8 -- N/C

 RS-232 PIN Definition

PIN Signal Definition PIN Signal Definition

1 -- N/C 5 Tx Transmission data

2 -- N/C 6 -- N/C

3 -- N/C 7 -- N/C

4 Rx Reception data 8 GND Ground

 Feed-through Terminal PIN Definition

PIN Signal Definition

1 SG Ground of signal

2 D- Data-

3 D+ Data+

4 X2 Digital input 2

5 X1 Digital input 1

6 X0 Digital input 0

7 S/S Ground of digital input

8 24V +24V

9 0V 0V

10 -- Earth ground

 Communication Parameter Setting

When users use IFD9506 for the first time, they can set the network and the MODBUS (RS-232/RS-485)

communication parameters by means of the external switch and DCISoft. The external switch can be used to

set the communication address, the data format, and the baud rate. DCISoft is used to set the parameters such

as IP address. Users can set the communication through RS-232 or Ethernet. Please connect the computer

and IFD9506 by RS-232 or the Ethernet cable before doing the setting.

Setting the communication parameter by the software:

1. Opening DCISoft: Enter “Communication Setting” in “Tools”. Choose “Ethernet” or “RS-232” in

“Connection Setup”, and click “OK”. Click “Search” on the task bar to search for IFD9506. Finally, click the

picture twice to enter the page.

2. Setting the network: Enter the basic setting page, choose either “Serial Master” or “Serial Slave” as the

master configuration, and set the network parameters. The default IP address is 192.168.1.5. When users

need to convert the Ethernet packet into the RS-232/RS-485 data, they have to choose the master mode.

When users need to convert the RS-232/RS-485 data into the Ethernet packet, they have to choose the

slave mode.

3. Setting the serial communication: Users can set the serial communication parameters by means of the

external switch or DCISoft. Please notice that the station address can not be the same with the station

address of the device connected by RS-485.

Note: After IFD9506 is restarted, if the setting in the software does not conform to the setting of the switch,

the communication will be carried out in accordance with the hardware setting by the switch. Please refer to

IFD9506 Operation Manual for more information related to the setting.

 LED Indicators & Trouble-Shooting

 POWER LED

LED status Indication How to correct

Green light OFF No power supply Check the working power

Green light ON Working power is normal --

 RS-485 LED

LED status Indication How to correct

Green light OFF No RS-485 communication

If the LED is off during the communication, check if the RS-485

connection of IFD9506 falls off.

Constantly ON Incorrect RS-485 connection Switch D+ and D-

Green light

flashes

RS-485 communication is

normal.

 LINK/ACT LED

LED status Indication How to correct

Green light OFF Ethernet connection fails.

1. Check if the Ethernet cable is correctly connected.

2. Re-power IFD9506. If the error still exists, send your IFD9506

back to the factory for repair.

Green light ON

The connection is normal, but

no data transmission.

Green light

flashes

The data is being

sent/received.

 Codes in Digital Display

Code Indication How to correct

01 ~ F7

MODBUS station address (in

normal operation)

F0 Returning to default setting --

F2 Working voltage is too low. Check if the working voltage is normal.

F3 Internal memory check error

1. Re-power IFD9506. If the error still exists, try step 2.

2. Reset IFD9506. If the error still exists, send it back to the factory

for repair.

F4 Factory setting error

1. Re-power IFD9506. If the error still exists, try step 2.

2. Reset IFD9506. If the error still exists, send it back to the factory

for repair.

F5 Network connection error Check if Ethernet is normally connected.

Full number of devices

connected in the network

Check if the number of Ethernet connections is too much.

F7 UART setting error. Check if the RS-485, RS-232 data format is correct.

E1 Alarm 1 triggered Check Alarm Input Point 1.

E2 Alarm 2 triggered Check Alarm Input Point 2.

E3 Alarm 3 triggered Check Alarm Input Point 3.

04 CRC error

1. Check if the station address of the RS-485 device is the same

with that of the other device.

2. Check if the data format of all devices connected by the RS485

communication cable is consistent.

0b No response from the station

1. Check if the RS-485 communication cable is connected normally.

2. Check if the RS-485 station address is set incorrectly, and make

sure that the data format of all devices is consistent.

注意事項

 此安裝手冊只提供電氣規格、一般規格、安裝及配線等。

 配線時請務必關閉電源，請勿在上電時觸摸任何端子。

 本機為開放型 (OPEN TYPE) 機殼，因此使用者使用本機時，必須將之安裝於具防塵、防潮及免於電擊∕

衝擊意外之外殼配線箱內。另必須具備保護措施（如：特殊之工具或鑰匙才可打開），防止非維護人員操作

或意外衝擊本體，造成危險及損壞。

 產品簡介

 功能特色

感謝您採用台達轉換器。IFD9506 為 Ethernet 轉換器，支援標準 MODBUS TCP 通訊協定（MODBUS TCP Client

8 組，MODBUS TCP Server 16

組）。支援 8 組 IP Filter 功能，過濾可存取的 IP。網路速度最快可達 100 Mbps

傳輸速率，並內建三點外部數位輸入點可觸發警報發送電子郵件。另外具有資料快取與串列失敗重傳功能，搭配

通訊與電源全隔離，讓您在享受高速 Ethernet 同時並兼顧穩定性。

 產品外觀

通訊口 RS-485, Ethernet,

RS-232

電源指示燈

站號設定開關

通訊格式、通訊速率設定開關

數位顯示器

RS-485 指示燈、Reset 按鍵、

Ethernet 指示燈

模組名稱

端子台 RS-485 連接器、數位輸入

點、電源輸入、大地

DIN 軌連接器

 功能規格

 Ethernet 介面

連接器

RJ-45 with Auto MDI/MDIX

線材 Category 5e, 100 公尺 (Max)

傳輸速率

10/100 Mbps Auto-Detection

網路協定

ICMP, IP, TCP, UDP, DHCP, SMTP, MODBUS TCP, Delta Configuration

 RS-485 介面

連接器

RJ-11

線材 Telecom Cable, 1200 公尺 (Max)

傳輸速率

110, 150, 300, 600, 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps

繁體中文

通訊格式

Stop bit: 1,2 Parity bit: None, Odd, Even Data bit: 7,8 ASCII/RTU

通訊協定

MODBUS, User Define

 RS-232 介面

連接器

Mini DIN

線材

DVPACAB215 / DVPACAB230 / DVPACAB2A30

傳輸速率

110, 150, 300, 600, 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps

通訊格式

Stop bit: 1,2 Parity bit: None, Odd, Even Data bit: 7,8 ASCII/RTU

通訊協定

MODBUS, Delta Configuration, User Define

 端子台

連接器歐式端子台 10PIN

線材雙絞線, 1200 公尺 (Max)

傳輸速率

110, 150, 300, 600, 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps

通訊格式

Stop bit: 1,2 Parity bit: None, Odd, Even Data bit: 7,8 ASCII/RTU

通訊協定

MODBUS, User Define

 電氣規格

電源電壓 24V DC (-15% ~ 20%) 由歐式端子台輸入

消耗電力

絕緣電壓

500V

重量

140g

 環境規格

雜訊免疫力

ESD (IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge

EFT (IEC 61131-2, IEC 61000-4-4): Power Line:±1KV

Communication I/O: ±0.5KV

RS (IEC 61131-2, IEC 61000-4-3): 80MHz ~ 1GHz, 10V/m. 1.4GHz ~ 2.0GHz, 10V/m

CS (IEC61131-2, IEC 61000-4-6): 150KHz ~ 80MHz, 3V/m

Surge (Biwave IEC61132-2, IEC61000-4-5):

Power line 0.5KV DM, Ethernet 0.5KV CM, RS-485 0.5KV CM

操作∕儲存環境

操作：0ºC ~ 55ºC（溫度）、50 ~ 95%（濕度）、污染等級 2

儲存：-25ºC ~ 70ºC（溫度）、5 ~ 95%（濕度）

耐震動∕/衝擊

國際標準規範 IEC61131-2, IEC68-2-6 (TEST Fc)/IEC61131-2 & IEC 68-2-27(TEST

Ea)

標準

 安裝

 外觀

下载后可阅读完整内容，剩余3页未读，立即下载

weixin_38744375

粉丝: 372
资源: 2万+

IFD9506 Ethernet转换器：MODBUS TCP通讯与安装指南

台达工业通讯模块-IFD9506 安装说明.pdf

模块应用台达

台达IFD9507 EtherNet/IP 通讯转换模块手册.pdf

台达通讯转换模块-IFD8500安装说明.pdf

IC-card--IFD.rar_7816_7816卡读写_ifd card_write read 7816_接触式IC卡

台达DELTA_USB RS-485 通讯转换模块.pdf

ISO 16000-3-2011中文.pdf

台达IFD9506 Ethernet 通讯转换模块操作手冊.pdf

DNG-Spec-1-7-0-0.pdf

IS07816-1-2-3-4_CN.pdf

最新资源