loginid=molbasic01@ginreen.com,time=2018-05-30 11:14:32,ip=113.116.51.226,doctitle=MT6762 LTE-A Smartphone Application Processor Functional Specification V1.0.pdf,company=Ginreen_WCX
MT6762
LTE-A Smartphone Application Processor
Functional Specification
Confidential A
This document contains information that is proprietary to MediaTek Inc.
Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.
1.4 Connectivity Features
MT6762 includes four wireless connectivity
functions:
WLAN
Bluetooth
GPS
FM Receiver
The RF parts of those four blocks are placed on
chip MT6631. With four advanced radio
technologies integrated on one chip,
M6762/MT6631 is the best and most convenient
connectivity solution in the industry,
implementing advanced and sophisticated Radio
Coexistence algorithms and hardware
mechanisms. It supports single antenna sharing
among 2.4GHz Bluetooth, 2.4GHz/5GHz WLAN
and 1.575GHz for GPS. The enhanced overall
quality is achieved for simultaneous voice, data
and audio/video transmission on mobile phones
and Media Tablets. The small footprint with
low-power consumption greatly reduces PCB
layout resource.
Supports integrated Wi-
Fi/Bluetooth/GPS
Single antenna for Bluetooth and
WLAN/GPS/Bluetooth
Self calibration
Single TCXO and TMS for GPS, BT and
WLAN
Best-in-class current consumption
performance
Intelligent BT/WLAN coexistence scheme
that goes beyond PTA signaling (e.g.
transmit window and duration that take
into account protocol exchange sequence,
frequency, etc.)
Wi-Fi
Dual-band (2.4/5GHz) single stream
802.11 ac/a/b/g/n MAC/BB/RF SoC,
20/40/80MHz bandwidth, MCS0~9
(256-QAM)
802.11 d/e/h/i/j/k/r/v compliant
Security: WFA WPA/WPA2 personal,
AES-CCMP, WPI-SMS4, GCMP, WPS2.0,
WAPI (hardware)
QoS: WFA WMM, WMM PS
802.11n optional features: STBC, A-
MPDU, Blk-Ack, RIFS, MCS Feedback,
20/40MHz coexistence (PCO),
unscheduled PSMP
Supports 802.11w protected managed
frames
Supports 802.11ac STBC TX/RX, 4T1R
beamformee, MU-MIMO RX, WoWLAN
Supports MediaTek proprietary low
power Green AP mode for portable
hotspot operation
Auto rate control for optimizing the signal
range and performance
Supports Wi-Fi Direct (WFA P-2-P
standard) and Wi-Fi Miracast (Wi-Fi
Display)
Supports Wi-Fi HotSpot 2.0
Integrated 2.4GHz PA with max. 23dBm
CCK output power and 5GHz PA with
max. 18.5dBm OFDM 54Mbps output
power
RX sensitivity at 11n HT20 MCS7 mode
and -62dBm 5GHz RX sensitivity at 11ac
VHT80 MCS9 mode
Supports 32 multicast address filters and
TCP/UDP/IP checksum offload
Per packet TX power control
Bluetooth
Supports Bluetooth 5 dual mode for 4x
the range, 2x the speed and 8x the
broadcasting message capacity