没有合适的资源？快使用搜索试试~ 我知道了~

首页SD650风扇电源控制模块用户指南

SD650风扇电源控制模块用户指南

0 下载量 150 浏览量更新于2023-11-23 收藏 5.64MB PDF 举报

该文件是sd650风扇和电源模块用户指南，提供了有关如何控制SD650风扇和电源模块的指导。在使用本文档和所支持的产品之前，请务必阅读并理解安全信息和安全说明。安全信息和安全说明可在以下链接找到：http://thinksystem.lenovofiles.com/help/topic/safety_documentation/pdf_files.htmlhttp://systemx.lenovofiles.com/help/topic/com.lenovo.sysx.safety.doc/safety_pdf.pdf 该服务器适用于始终安装在电源分配单元（PDU）或UPS电源提供的负载侧上，并提供最大20A支路电路保护的系统/机架中。整个系统/机架与主电源的连接应为可拔插式B型连接器。此外，请确保您熟悉联想解决方案的保修条款和条件，这些条款和条件可以在以下位置找到；。

Figure 1. Overview

Note: Pages with Refresh button does not refresh periodically, except voltage overview and cooling

overview. Auto-refresh interval is every 1 or 5 minutes on these two pages. For the other pages, click

Refresh button to get the latest readings and status.

Summary

Summary page displays overall chassis status and information.

Fan and Power Control ModuleUser's Guide

Figure 2. Chassis

Chassis Front Overview

Individual tab is used introduce status of chassis front view and rear view components. Under Chassis Front

Overview section, the following illustration indicates the node status:

Figure 3. Chassis Front Overview

• Node: Indicates node numbering.

• Width: Half /full is used to represents half-wide or full-wide node.

• Height: Node height can be 1 to 6U.

• Status:

– Not Present: No node is installed.

– No Permission: The node has not granted power permission and cannot be powered on.

– Fault: The node has power fault and cannot be powered on.

– Power On: The node is powered on.

– Power Off: The node is powered off.

• Reset/Reseat: Used to perform virtual reset/virtual reseat.

– Reset: Remotely reset node XCC through FPC.

– Reseat: Remotely power cycle the entire node.

– After virtual Reset/Reseat, the node XCC takes at least two minutes to be ready.

Note: Chassis Front Overview needs to be manually updated 5 minutes after FPC or node XCC is reset

to maintain latest node status.

Chassis Rear Overview

Under Chassis Rear Overview section, there are three major sections to show the rear chassis status:

• Management Module

• Current PSU

Chapter 3. Overview 7

• Fan

Management Module

Management Module: Indicates the status of FPC

Figure 4. Management Module

• Status: Indicates the FPC operating status.

– FPC Reboot: Warm reboot the FPC

– Reset to Default: Restored the FPC settings to out-of-factory default

• Firmware version: The current firmware version

• PSoC version: When user performs FPC firmware update, PSoC firmware is automatically updated to the

latest version.

• Boot-up Flash: Indicates FPC current boot up bank. In normal operation, Boot-up flash should always

be First. Only when the first flash has a hardware or firmware failure, FPC will switch to 2nd flash.

• Identify LED: Identify LED (ID LED) is a blue LED to assist user in locating chassis in rack. User can

choose to turn the blue LED solid on or make the LED blink once every second. Click Apply to activate the

option.

• Error LED: Error LED is on when critical event occurs. User can choose to turn it off and allow the LED to

be turned on when the next event comes.

PSU

PSU: Indicates the status of power supplies

Figure 5. PSU

• Status

– Present: The power supply is installed.

– Not Present: No power supply is installed.

– Fault: The power supply is in faulty condition.

8 Fan and Power Control ModuleUser's Guide

剩余57页未读，继续阅读

「已注销」

粉丝: 5
资源: 138

上传资源快速赚钱

我的内容管理展开

我的资源快来上传第一个资源

我的收益

登录查看自己的收益

我的积分登录查看自己的积分

我的C币登录后查看C币余额

我的收藏

我的下载

下载帮助

SD650风扇电源控制模块用户指南

模块电源使用说明

SD模块用户操作手册

SD-WAN sdwan-cr-book vEdge-routers-hardware-installation-guide.

Dell PowerEdge R720 和 R720xd 用户手册文档

BIGTREETECH Octopus 用户手册1

Dell Latitude E7240用户手册

DELL 730XD用户手册.pdf

2114002437BIGTREETECH Pi V1.2用户手册.pdf

zedboard原理图和指导手册.zip

DE4开发板用户手册：接口与配置指南

最新资源